FORUMS
Remove All Ads from XDA

[13 Feb][DL DesireHD ARA][DL Data2SD/Ext4 v3.0][1.84.661][Nand/SD/MAGLAR all in one]

1,227 posts
Thanks Meter: 1,067
 
By dandiest, Senior Member on 9th February 2011, 12:37 PM
Post Reply Email Thread

Hi all, I have managed to merge the code and develop a new function to upgrade all the build using one update package in the future.

Thus, I intend to merge all the Nand version into this thread
All the SD&MAGLDR version into this thread, which will also easy for me to take care of the builds. thanks.


Let a figure come to speak first


Uploaded by viperd using DL Desire Z v3.5, DL Data2SD/Ext4 v3.0

Quote:

Since the DL Desire ARA v1.1 was disclosed in this thread, in order not to cause more confusion, have to release it before my plan.
v2.0 is based on Desire HD 1.72, and themed similar to Coredroid.
v1.0 is based on Desire HD 1.84, pure stock version, and actually, the base is much newer and advance than v2.0
Btw, my focus is still on desire z, if you want prompt support or have problem with this build, suggest you try rafpigna or markinus or imilka's, they are all excellent dhd builds.
If you have problem, please post to my test place or ask my testers, I may not be able to visit this thread frequently.

to my testers, I don't mind you disclose my test place to others as long as they are kind enough.

Features:
All my new builds have the following features:
Quote:

1. All in one package, can be flashed to Nand or boot from SD or Load from Magldr.
2. All the build is squashed, once set the swap_mode=2, can delete the squashed.sqsh file from /system to release 160M space from system, but you must keep the swap_mode=2 untouched.
3. All the build can use Update_DL to update or change anything you want.
4. Equipped with DL Data2SD/Ext4 v3.0 developed by myself and freak, with following features:

-- auto detect and make use of your 2nd and 3rd partitions with high performance
-- auto convert the system.img to system.ext2 for SD/MAGLDR
-- auto partitioning your SD Card once set the format_ext4=9 (need test).
-- format 2nd partition with proper block size of ext4 with format_ext4=1, which is used for data partition
-- change ppp/rmnet with ppp_mode=0 or 1.
-- set you gps zone with gps_zone="your country code"
-- can use Update_DL to update system incrementally, all the Update_DL plugin I previous published(backup/restore, secue) is still applicable
-- the backup/restore can backup and then restore your whole system including: settings, sms, email, etc, you even can use this to migrate your data.img to ext4(set data_img=1 to use data.img and do the backup, and then set the data_img=0 to use the ext4 and do the restore.)
-- once you encounter the boot loop and FC, you can use the rescue plugin to rescue your system.
-- we are now testing the next version of our Data2SD/Ext4 which is more intelligent, can even detect where the system is loaded from(nand, magldr or sd), and your mobile type(EU modal or Tmous) to choose the best settings automatically.
Actually, many builds in this forum adopt part or full of our initrd to provide the high performance ext4 support.

DL DesireDH v1.0 ARA Series
Quote:

1. Based on the official HTC ACE 1.83.415.4 RUU ARA, specific for Arabic, Stock version.
2. Also equipped with DL Data2SD/Ext4 v3.0.

DL DesireDH v1.0 Series
Quote:

1. Based on the newest Desire HD 1.84.661.1 RUU, Stock version.
2. the new version of DL Data2SD/Ext4 v3.0
3. use gpc kernel which can easily be changed to any other kernel by using the Update_DL[/SIZE]

DL DesireDH v2.0 Series
Quote:

1. Based on the very popular Desire HD 1.72.405.3 RUU, Themed similar to Coredriod.
2. Also equipped with DL Data2SD/Ext4 v3.0.
3. For ppl like theme, should try this version.

Download
How to install
Quote:

For Nand:
just extract the Desire_DL and Update_DL(for upgrade) folder from the package to the root of your SDCard, flash.
change the config.txt.nand to config.txt and modify the config in it.

For SD/MAGLDR:
just extract the Desire_DL and Update_DL(for upgrade) folder from the package to the root of your SDCard, answer yes when ask for overwrite.
change the config.txt.sd to config.txt and modify the config in it. (Nand)
or change the config.txt.magldr to config.txt and modify the config in it. (Magldr)
If you encounter mobile data issue, please check here

The first boot will take a very long time, especially for SD/MAGLDR due to system will convert the system.img to system.ext2, need 10-20 mins depends on the speed of your SDCard.

After the install, please reboot your system at lease twice to let the system settle down.

Suggestion changing the kernel to gpc if you encounter any issue.

How to upgrade or change kernel or customize the system
Quote:

1. more kernel can be found here,
--a. For Nand, just extract the Update_DL folder to the root of your sdcard, boot twice.
--b. For SD, extract the Update_DL folder to the root of your sdcard, and copy the zImage file from /Update_DL/update/kernel_files to Desire_DL, boot.
--c. You can also use the same kernel package, but replace the kernel file with your own under /Update_DL/update/kernel_files. (for SD/Magldr version, the zImage file should be put under Desire_DL)

2. for system upgrade or bugfix, extract the Update_DL folder from a update package to the root of your sdcard, reboot.

3. if you intend to replace any file from the system, use rootexplorer to delete the target file first, then put the file to /Update_DL/root/system..., e.g, if you want to change the framework.res, just delete the origin file from /system/framework, then, put your own file under /Update_DL/root/system/framework, boot.

Plugin for DL Desire Series
How to load from MAGLDR
Quote:

1. Press the power button during reboot
2. Select "Services" from MAGLDR menu
3. Select BootSettings
4. Select AD SD Dir
5. Choose the Desire~1
6. Back to the Boot from AD SD.

Useful info
DL Desire Series
The Following 12 Users Say Thank You to dandiest For This Useful Post: [ View ] Gift dandiest Ad-Free
 
 
9th February 2011, 12:46 PM |#2  
Junior Member
Thanks Meter: 0
 
More
downloading...
9th February 2011, 12:46 PM |#3  
dandiest's Avatar
OP Senior Member
Singapore
Thanks Meter: 1,067
 
Donate to Me
More
reserve for update
9th February 2011, 12:47 PM |#4  
Member
Thanks Meter: 1
 
More
Can I use the data.img from the DesireZ build?
9th February 2011, 12:47 PM |#5  
dandiest's Avatar
OP Senior Member
Singapore
Thanks Meter: 1,067
 
Donate to Me
More
Quote:
Originally Posted by etayel

downloading...

you even fast than me.
9th February 2011, 01:01 PM |#6  
jaguaralani's Avatar
Senior Member
Flag Perth
Thanks Meter: 634
 
Donate to Me
More
Quote:
Originally Posted by dandiest

you even fast than me.

waiting for 1.83...........
9th February 2011, 01:10 PM |#7  
Junior Member
Thanks Meter: 0
 
More
Thank you very much, downloading...

Will reply the result after complete tested.

Any screenshot will be appreciated...
9th February 2011, 01:16 PM |#8  
mamdouhn's Avatar
Senior Member
Flag Amman
Thanks Meter: 37
 
More
downloading.............
...............
9th February 2011, 01:22 PM |#9  
mamdouhn's Avatar
Senior Member
Flag Amman
Thanks Meter: 37
 
More
Quote:
Originally Posted by hhhddd999

Can I use the data.img from the DesireZ build?

Can we use or no????
9th February 2011, 01:29 PM |#10  
paocavallo's Avatar
Senior Member
Flag London
Thanks Meter: 18
 
More
Question upgrade procedure
Hallo, master!
firts of all many thanks for your big and amazing work!
sorry for the stupid question, but if I have installed your DL DesireZ v.3.4, now may just put into the sd root the DL DesireHD Update_DL folder?
and the other folder zipped in (called Desire_DL)??
9th February 2011, 01:32 PM |#11  
Senior Member
Flag Niedersachsen
Thanks Meter: 180
 
More
I'v tested the 1.1 now, and there is stil no mobil-data by me
wifi and all other, I tested runs best.

I started from WinMob in the normal way
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes