FORUMS
Remove All Ads from XDA

sparkle v android 6.0.1 freezing at boot after android one toolkit root

2 posts
Thanks Meter: 0
 
By hygy, Junior Member on 10th June 2016, 09:44 AM
Post Reply Email Thread
Hi,

I want to root a karbonn sparkle v, what is running android 6.0.1
I started android my wife one toolkit 1.2.1 then press list devices, then root. It said copying update.zip to androd. Then it rebooted, I see the now (temporary) bootloader, it said select the update.zip but I does not find on the sdcard. So I changed to apply update from adb, then on the pc I searched the update.zip used adb sideload update.zip command. Then it seems it is installedd successfully. But after that point I cannot boot sparkle v anymore. It stopps at the beginning where the circles spinning.

I tried to download sp flash tool, and flash a stock firmware, but the flastool does not recognize my wifes phone (as it does not recognize my working phone).

I can access the stock recovery (vol up+power) and then select recovery, then i can access the android recovery, i downloaded the 015427.zip copyed to the sdcard. Select Apply update from SD card. It wites:
PHP Code:
Supported API3

-- Install /sdcard/update.zip
Finding update package
...
Opening update package...
Verifying update package...
Can't install this package (Thu Sep 24 22:31:53 URC 2015) over newer build (Tue Mar 29 23:27:39 UTC 2016).
E:Error in /sideload/package.zip
(Status 7)

Installation abborted. 
What can I do to make the phone working again?

regards
HyGy
 
 
10th June 2016, 02:14 PM |#2  
OP Junior Member
Thanks Meter: 0
 
More
I successfully installed CWM in fastboot mode, then I installed the update.zip from the sdcard with CWM. (flushed data, and installed).

I have a running android 6.0 it check for update and the first update is installed successfully.

Is there any disadvantage using the CWM? If yes, then I how can I put back the stock bootloader?
14th July 2016, 12:33 PM |#3  
Junior Member
Thanks Meter: 0
 
More
I have same problem, plz provide detail step on how to flash it
Quote:
Originally Posted by hygy

I successfully installed CWM in fastboot mode, then I installed the update.zip from the sdcard with CWM. (flushed data, and installed).

I have a running android 6.0 it check for update and the first update is installed successfully.

Is there any disadvantage using the CWM? If yes, then I how can I put back the stock bootloader?

Please help me as im having same trouble. please provide steps on how to install cynogen mode. Im new to these development.
26th August 2016, 06:50 AM |#4  
Junior Member
Thanks Meter: 0
 
More
I had the same problem, i used Android One Toolkit, and my sparkle V was stuck with boot looping for around 2-3 hrs. I then tried to use SP flash tool to flash it with android 4.4.2 available. However, in switched off mode, my phone was not detected. And it took me to install few drivers (some around 7-8) that i found after searching the google! And SP tool was somehow able to detect after that. I am not sure which one driver actually worked. It took some 10 minutes to flash once the phone was detected by the SP tool. Thus, i suggest you try with few drivers that are available and wait until your phone is recognized by the computer.

I used my SD card as internal drive in my phone. Maybe that was the problem while working with Android One Toolkit. As it required a SD card to use the update.zip. Probably it was not recognized as SD card anymore as my SD card was configured as internal storage. That is my guess why i got stuck with boot looping.
22nd September 2016, 06:47 AM |#5  
AdityaAg's Avatar
Senior Member
Flag Patna
Thanks Meter: 87
 
More
Quote:
Originally Posted by hygy

Hi,

I want to root a karbonn sparkle v, what is running android 6.0.1
I started android my wife one toolkit 1.2.1 then press list devices, then root. It said copying update.zip to androd. Then it rebooted, I see the now (temporary) bootloader, it said select the update.zip but I does not find on the sdcard. So I changed to apply update from adb, then on the pc I searched the update.zip used adb sideload update.zip command. Then it seems it is installedd successfully. But after that point I cannot boot sparkle v anymore. It stopps at the beginning where the circles spinning.

I tried to download sp flash tool, and flash a stock firmware, but the flastool does not recognize my wifes phone (as it does not recognize my working phone).

I can access the stock recovery (vol up+power) and then select recovery, then i can access the android recovery, i downloaded the 015427.zip copyed to the sdcard. Select Apply update from SD card. It wites:

PHP Code:
Supported API3

-- Install /sdcard/update.zip
Finding update package
...
Opening update package...
Verifying update package...
Can't install this package (Thu Sep 24 22:31:53 URC 2015) over newer build (Tue Mar 29 23:27:39 UTC 2016).
E:Error in /sideload/package.zip
(Status 7)

Installation abborted. 
What can I do to make the phone working again?

regards
HyGy

https://m.youtube.com/watch?v=W9Co-2QBRZU
watch this video how to flash properly the stock firmware
and this https://m.youtube.com/watch?v=rVXCnM...v-google&gl=IN and this for drivers
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes