Development [05.08.22] S908E I S908B I S9080 I S908N I Dr.Ketan Magisk ROM I OneUI 4.1

[JeKaSBaLTo]

Is there anything for s908u?

 

[dr.ketan]

Is there anything for s908u?

First find method to root your device then I may take request.

 

[JeKaSBaLTo]

First find method to root your device then I may take request.

So as of no there is no even root option????

 

[dr.ketan]

Testing S03 Based on XXU1AVC9

 

[handry.wang]

I just found a bug in S02: alarm can not be stopped when it rang, I must restart the phone to stop it each time my alarm is rang.

 

[JazonX]

I just found a bug in S02: alarm can not be stopped when it rang, I must restart the phone to stop it each time my alarm is rang.

Doubtful it'd be a ROM bug. Rom doesn't touch any aspects of the alarm clock.

 

[Darkpurple]

First find method to root your device then I may take request.

Does it will support S9080(Hong Kong version) too?...Because the COVID-19 hard to buy S908B & S908E version in our country...
And I am a big fans of Dr. Rom from S21 Ultra and Note 10 Plus...

I want my S9080 can using this nice Dr. Rom too....both the we are Snapdragon....

Thanks...

 

[dr.ketan]

Does it will support S9080(Hong Kong version) too?...Because the COVID-19 hard to buy S908B & S908E version in our country...
And I am a big fans of Dr. Rom from S21 Ultra and Note 10 Plus...

I want my S9080 can using this nice Dr. Rom too....both the we are Snapdragon....

Thanks...

You can try it with preparation for Factory reset, If something went wrong and device doesn't boot - Factory reset from stock recovery, thats' it
Let me know how it goes and report any other error in case device boot and have any error.

 

[dr.ketan]

ChangeLog S03 (S908B & S908E)

• Based on S908EXXU1AVC9 Android12 March 2022 security patch OneUI 4.1
• ROM Tool on essential fix auto setup zygisk including SafetyNet fix (no needs to change any option manually)

Important Instructions for setting up ROM (NEW)

Prerequisite :

• Must have installed firmware S908EXXU1AVBF S22 Ultra (Reported working on AVC6 too)
• Rooted device with Magisk (Zygisk) Intallled (Follow steps below in case you have non rooted device)
• We recommend to make EFS (IMEI) backup as soon you root device and keep copy to safer place (outside device)

Spoiler: Brief instructions about how to root S908B/E

(Root S908E Snapdragon)

• Unlock bootloader
• Download Root_files*.zip (available in download area) - Extract and Flash Root_Files_*.tar.md5 with Odin for AP tab
• Reboot to recovery and select to format data (Factory reset option on stock recovery)
• Reboot device → You will see Magisk stub in drawer → Update it. (In case stub not there, Donload magisk app from Download area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.

(Root S908B Exynos)

• Unlock bootloader
• You needs to download stock firmware (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Flash patched file with AP tab of Odin
• Reboot to recovery and select to format data (Factory reset option on stock recovery)
• Reboot device → You will see Magisk stub in drawer → Update it. (In case stub not there, Donload magisk app from Download area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.

PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.

How to Install Dr.Ketn ROM Module (New!)

• Download app ROM Installar XDA S22 S*.apk and and Install as regular apk (* = ROM verion)
• Uninstall any other magisk module you have installed
• Open ROM Installaer app → Grant SU permission → Just seat and relax. It will auto download ROM and Install automatically. You can see process on screen. → Reboot device when asked.

Benefits of ROM Instller : This method have some extra benefits over regular installation like

• It won't process if no root access found
• It will block installation on wrong devices
• It will abort Installation process if MD5 doesn't match (Corrupt download) to prevent bootloop.
• Also it will show current firmware version and available firmware version (You should not install if there is much difference in firmware base) Read prerequisite above for recommended firware)

Setting up device first time after Module installation

• Open ROM Tool from app drawer and Apply essential fix and Reboot,
• After reboot you can check SafetyNet and should be passed. You can use this app from playstore or This from Github to check SafetyNet (ROM Tool will offer to install this during Essential fix too)
• Now you can further setup ROM a per your liking. Also MagikHide is Configure Denylist now and available under Magisk Settings.
• Since A12 new Magisk (Zygisk) doesn't have buil-in Module repo, You can get standalone module manager from here (ROM Tool will offer to install this during Essential fix too) For more details and queries about new magisk ref this

Important Note for Dual active SIM users :

After Module ROM Installation, Internet/Network may not be available, Once you apply esssential Fix from ROM Tool- it will detect it and fix on it's own. Netork/Internet will be available after reboot.

PS : Plz don't install any other mods for SafetyNet, All queries related to Magisk/SafetyNet will be ignored if already explained above


TweaksPro version requires 4.1.0 or up

ROM Features (XDA Version)

- Ad Free QS Panel Toggle
- Reboot to recovery QS Panel Toggle
- Native call recorder (Manual) While you are on call - click 3 dot - Record (Should work without CSC restriction)
- Auto Call recorder without CSC restriction (ROM Tool - Mods & Fix)
- High Volume warning disabled
- Pre fixed Titanium freezing while restoring apps
- Probable fix for Titanium Backup schedule
- Internet browser Secret mode
- S Health patch for using with rooted device.
- ROM Tool with following Options

• AdFree mode Enable/Disable
• Single click install/uninstall custom fonts (on the fly)
• YouTube Vanced Installer (No xposed requires)
  1. NonRoot - Requires MicroG to login
  2. Root - Truely alternate to Youtube, Can login to youtube without MicroG (disable Play store update)
• You have to click on NonRoot/Root depending on your choice, then you needs to click "Install" tab and latest version of Youtube vanced will get installed.
• StatusBar Icons
  1. Show/Hide stock battery
  2. Show/Hide 3minit battery
  3. show/hide stock clock
  4. show/hide 3minit clock
• ROM Control - See below
• Mods & Fix
  1. Auto Call Record
  2. Titanium backup FC fix
  3. Google Pay Fix
  4. Added camera fix (Certain users reported camera failed issue. This is reported on stock too, here is someworkaroung meanwhile samsung fix it)
  5. SafetyNet Fix
  6. Samsung Health & Private share fix
• Update & Fix

- ROM Control (systemUI preferences)

• Battery Bar with thickness and color option
• Virtual key on statusbar (Lt/Cinter/Rt)
• Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option

PS : There may be few more options in ROM control but won't work if those are not mentioned here.

Known Bug/Tips/Fix

• 3 minit users can use 3minit battery paid version for free. Check this (Thanks to gharrington )
• Tips on TWRP and App Backup/Restore Read Here
• Boot splash warning removal. At presently available for Exynos (S908B) only, get it from ROM download area. Instructios packed inside.

Download : DrKetanROM.com



PS : This is a fully customized ROM and for end users only, ROM or any part of ROM not allowed to redistribute,modify or to use as base to prepare new ROM.

STATUS : Online

 

[wackowizzard]

Hi,

Your ROM looks nice. Can I flash on my S22? I have SM-S908B/DS version.

 

[Darkpurple]

Hi,

Your ROM looks nice. Can I flash on my S22? I have SM-S908B/DS version.

I saw someone working at S908E/DS, may be S908B/DS would be fine too.

 

[this.guy.lol]

Will this rom work on the HK version?

 

[wackowizzard]

I saw someone working at S908E/DS, may be S908B/DS would be fine too.

What is the /DS standing for?

 

[dr.ketan]

What is the /DS standing for?

Dual SIM
AFAIK, All E and B versions are probably DS only.

 

[Darkpurple]

Will this rom work on the HK version?

Quote for Dr.ketan replied me before again:

You can try it with preparation for Factory reset, If something went wrong and device doesn't boot - Factory reset from stock recovery, thats' it
Let me know how it goes and report any other error in case device boot and have any error.

P.S I still waiting for my S9080, so I cannot answer you exactly.

 

[wackowizzard]

Dual SIM
AFAIK, All E and B versions are probably DS only.

Ok. Tnx 4 reply.

 

[JazonX]

Hey @dr.ketan , Is AppLock working for you ?
When I select it from Settings / Advanced - It just goes back to the settings screen.

 

[rodrigofd]

Hi @dr.ketan!
I'm curious about this "essential fix"... would you mind elaborating on what it does exactly?

I've been struggling over my rooted AVBC9 S22 (using the Safetynet fix from kdrag0n), with lots of crashes, etc.

But after installing your module, everything stabilized

If you can share some details, I'd appreciate it.

Thanks for your work!

 

[this.guy.lol]

Will this work on the snapdragon version from HK? Maybe I didn't ask clearly

 

[dr.ketan]

Will this work on the snapdragon version from HK? Maybe I didn't ask clearly

You have been already answered in post #75
Also read post #68