Development [24.03.24] OneUI 6.0 Beta I Full ROM System-RW for S908E/B I Dr.Ketan ROM

[Leeum]

Wavelet is very bad, imo. Poweramp equalizer is better, but doesn't compare to V4A. Do you get the same problem than i (drivers installation loop)?

I will keep trying to mske V4A to work. If I succeed I'll post here. I really want that app to work.

I used poweramp for so long until Viper now my viper config makes everything so much louder and crisp. Wavelet not as good but the way i have it setup atm makes it sound almost on par with Viper

 

[ffp.]

I used poweramp for so long until Viper now my viper config makes everything so much louder and crisp. Wavelet not as good but the way i have it setup atm makes it sound almost on par with Viper

Viper have excellent bass. What's your wavelet settings that goes on par with Viper, could you share?

 

[dr.ketan]

Good morning Dr Ketan,
I recently bought his rom and also the Tweaks Pro version and I am very satisfied. I'm using a Samsung Note 20 Ultra 5G.
I would like to know if the rom could be implemented in the future with the possibility of recording Voip calls.
I use the Boaldbeast Voip recorder app which works quite well. It does not start automatically but the recordings are good.
The problem I encountered after installing Android 11 is the delay in activating up to almost twenty seconds. I am attaching the log file hoping you can give me some suggestions.
the rom also shows this message at startup: developer warning for package "com.ketan.tweaksn20pro" failed to post notification on channel "quick" See log for more details.
I will also send the log file as soon as I understand how to do it.
I am notified of updates for the rom and for the Tweaks pro app. Nothing happens when I click on the notification icon.
Thanks in advance for any suggestions and help you will want to give me.
Best regards.

Paul

Hi
May be you have wrongly posted here (On S22 Thread)
Anyway, TweaksPro just enable call recording features of samsung with CSC featres and not using it's own source. Samsung call record doesn't allow to record VOIP call and this is beyond scope of app.
REgarding notification issue, check Settings - App _ tweaksPro - Notification setting or you may clear data / reinstall TweaksPro.

 

[di10pn]

Ciao
Forse hai postato erroneamente qui (sul thread S22)
Ad ogni modo, TweaksPro abilita semplicemente le funzionalità di registrazione delle chiamate di Samsung con funzionalità CSC e non utilizza la propria fonte. Il record di chiamata Samsung non consente di registrare la chiamata VOIP e questo va oltre lo scopo dell'app.
Per quanto riguarda il problema di notifica, controlla Impostazioni - App _ tweaksPro - Impostazioni di notifica oppure puoi cancellare i dati / reinstallare TweaksPro.

Tanks a lot.

 

[ffp.]

@dr.ketan , did you used anu audio mod or whatever in your rom that might be conflicting with V4A? I'm still trying to make it work nonstop. Digging about audio_effects.xml and etc. I really want to make it work snd any help is welcome, since I'm not knowledgeable enough.

If I get it to work I'll post how to do that. Thanks.

 

[JazonX]

New Firmware S908EXXU2AVE4 is Out.

EDIT: Dirty Flash OK over AVDD to AVE4

 

[browneyes9x]

Good evening, @dr.ketan
I've just tried to install this ROM, had checked Secure Folder and Google Pay, all of them still can't work. Only S Health is ok. Please help, did I do something wrong T__T

My model is SM-S908N

 

[Handymann007]

Good evening, @dr.ketan
I've just tried to install this ROM, had checked Secure Folder and Google Pay, all of them still can't work. Only S Health is ok. Please help, did I do something wrong T__T

My model is SM-S908N

View attachment 5620031 View attachment 5620033

Do you have the safetynet-fix-v2.2.1 module on it? I still have the GPay.SQLite.Fix.v2.4 module on it and Google Pay runs without any problems. Have you checked if the PlayStore is certified?

 

[browneyes9x]

Do you have the safetynet-fix-v2.2.1 module on it? I still have the GPay.SQLite.Fix.v2.4 module on it and Google Pay runs without any problems. Have you checked if the PlayStore is certified?

@Handymann007 yes I've just checked and I have that safetynet-fix-v2.2.1 module on that, but not have the gpay.sqlite like you. And I lost certified too

 

[Handymann007]

@Handymann007 yes I've just checked and I have that safetynet-fix-v2.2.1 module on that, but not have the gpay.sqlite like you. And I lost certified too

Turn on Airplane mode then go to Apps in Settings. Since then on Google PlayStore stop and delete memory data and also stop Google Play Services and delete memory and data. After restarting the cell phone and turning off flight mode. Now it takes about 5 minutes and the PlayStore should have a certificate again. Try it like this.

 

[browneyes9x]

Turn on Airplane mode then go to Apps in Settings. Since then on Google PlayStore stop and delete memory data and also stop Google Play Services and delete memory and data. After restarting the cell phone and turning off flight mode. Now it takes about 5 minutes and the PlayStore should have a certificate again. Try it like this.

@Handymann007
I've just did it as you said and now it didn't appear certificate status

 

[universed]

Hey Dr.

I am based in Indonesia and am planning to buy a S22 Ultra. One shop is showing me a phone with model # SM908E/DS. I understand this is an Exynos chipset and will work best with this ROM, please confirm

 

[Handymann007]

@Handymann007
I've just did it as you said and now it didn't appear certificate status

It takes a few minutes for it to show up again.

 

[browneyes9x]

It takes a few minutes for it to show up again.

thank you so much, it has appeared again. Now what do I have to do next?

 

[Handymann007]

thank you so much, it has appeared again. Now what do I have to do next?

Would delete and reinstall Google Pay again and see if it works. If not then add GPay.SQLite.Fix.v2.4 to it.

 

[browneyes9x]

Would delete and reinstall Google Pay again and see if it works. If not then add GPay.SQLite.Fix.v2.4 to it.

do you have the link for v2.4 bro? I had searched but only v2.8 now. Had tried to flashed it many times but still error "this card can't be set up to pay in store"



does it not because my model manufacturer is from Korea so I can't use, right?

 

[Handymann007]

do you have the link for v2.4 bro? I had searched but only v2.8 now. Had tried to flashed it many times but still error "this card can't be set up to pay in store"



does it not because my model manufacturer is from Korea so I can't use, right?

I don't have a link for the sas module. Have to search Google. Then install the module in Magnik under module from memory and press the volume button once when installing when it shows it. At the end then press VOL + so that he deletes the data and such from Google Pay. Then restart and test again.

 

[browneyes9x]

I don't have a link for the sas module. Have to search Google. Then install the module in Magnik under module from memory and press the volume button once when installing when it shows it. At the end then press VOL + so that he deletes the data and such from Google Pay. Then restart and test again.

still can't be set up I had found the v2.4 too but it doesn't work

 

[Handymann007]

still can't be set up I had found the v2.4 too but it doesn't work

Because if I left the cell phone again and before you put Google Pay on it, I would do the steps I wrote above. I still know from the Note 20 that it never worked when I put Google Pay on it first.

 

[dr.ketan]

Hey Dr.

I am based in Indonesia and am planning to buy a S22 Ultra. One shop is showing me a phone with model # SM908E/DS. I understand this is an Exynos chipset and will work best with this ROM, please confirm

It's Snapdragon, ROM will work on S908E/DS too. Thread title have mentioned supported devices.