Development [24.03.24] OneUI 6.0 Beta I Full ROM System-RW for S908E/B I Dr.Ketan ROM

[dr.ketan]

The ROM installer app offers only AVG6 as the latest package. Is there an updated version of the ROM installer.APK or the server is not pushing the new build yet?

As quoted post have mentioned, it's under testing. Once you see status Online, you will able to download it. May be later today or tomorrow, depending on user's test report.

 

[JohnTheFarm3r]

As quoted post have mentioned, it's under testing. Once you see status Online, you will able to download it. May be later today or tomorrow, depending on user's test report.

My bad. Thanks for the prompt reply.

 

[lvchi]

Root files uploaded to download area for today's Beta
- S908B Beta3 (VI9)
- S908E Beta2 (VI9)

Installation :

• Unlock bootloader
• Download from XDA ROM download area (link below) and extract root files to get *tar.md5 file
• Turn off Auto reboot option in Odin
• Flash extracted *.tar.md5 with Odin AP slot
• When file get flashed (You will see PASS), Keep holding Vol Down + Power (With device connected to PC). Once device reboot, immediately release vol down button and keep holding power + vol up (For a moment you needs to release and hold again poswer button when asked), this will reboot device to recovery - select to factory reset
• Reeboot to system. Update Magisk from stub OR Install Magisk 25.2 apk

Download : DrKetanROM.com

TWRP : (Only for expert)
Root file doesn't have TWRP included. If you want to test, flash it separately. No needs to flash patched vbmeta as Root files already have included it. TWRP may work but Kernel may or may not work so don't run 'multidisabler' else device may not boot. Still if you want to try, make backup of boot and super partition before applying 'multidisabler' If device doesn't boot, restore both and format data.

PS : You have to make backup of boot & super on USB storage as before multidisabler, data partition won't work

Can I read and write the system partition in oneui5？

 

[dr.ketan]

Can I read and write the system partition in oneui5？

This ROM is magisk module and beyond the scope to implement it. But you can do it yourself with system rw script, no needs to have rom for that

 

[lvchi]

This ROM is magisk module and beyond the scope to implement it. But you can do it yourself with system rw script, no needs to have rom for that

Is there a script that can be used for oneui5? I didn't find one that works. (My English is not good, please forgive me.)

 

[bandy17]

Running S908B Beta3 (VI9) Test Module without any issues. Mods work fine too.

 

[JohnTheFarm3r]

This ROM is magisk module and beyond the scope to implement it. But you can do it yourself with system rw script, no needs to have rom for that

Do you have any SystemRW script which you may know it works? The one SystemRW 1.32 only made Vendor RW, but the system is still RO only.

 

[dr.ketan]

Do you have any SystemRW script which you may know it works? The one SystemRW 1.32 only made Vendor RW, but the system is still RO only.

Is there a script that can be used for oneui5? I didn't find one that works. (My English is not good, please forgive me.)

Look to TWRP thread, there is Telegram link by developer. Join there for better help and script.

 

[JohnTheFarm3r]

Look to TWRP thread, there is Telegram link by developer. Join there for better help and script.

Thank YOU!

 

[Oncet]

Installed dr ketan rom latest a13 beta on s908n. I am not able to conect to galaxy gear sport Watch. Anyone else have issue with wearable connection?

 

[dr.ketan]

Installed dr ketan rom latest a13 beta on s908n. I am not able to conect to galaxy gear sport Watch. Anyone else have issue with wearable connection?

If you have old galaxy watch (2/3) it requires vendor rw

 

[aalmosawi]

Does this rom have the latest version of oneui 5 beta?

 

[Oncet]

If you have old galaxy watch (2/3) it requires vendor rw

Do I need to install twrp and run system RW script? Or just install kernel?

 

[dr.ketan]

Do I need to install twrp and run system RW script? Or just install kernel?

Custom Kernel + TWRP → Reboot to TWRP → run command multidisabler from TWRP terminal → Format data

 

[Oncet]

Custom Kernel + TWRP → Reboot to TWRP → run command multidisabler from TWRP terminal → Format data

OK. Thanks Dr. Since I am formatting data again, I will run the Afaneh's System RW script v 0.3 also. Do you have link to latest TWRP handy? I am trying to look in TWRP telegram group.

 

[dr.ketan]

OK. Thanks Dr. Since I am formatting data again, I will run the Afaneh's System RW script v 0.3 also. Do you have link to latest TWRP handy? I am trying to look in TWRP telegram group.

same latest TWRP of A12, Get from TWRP thread

Does this rom have the latest version of oneui 5 beta?

This is magisk ROM, you must have to be on same firmware. OneUi 5.0 module is yet not released and under testing, It may released tomorrow (Based on latest beta)

 

[Oncet]

Hello, Gear watch is now connected using Wearable Application. Thanks Again Dr. Ketan.

 

[lvchi]

This ROM is magisk module and beyond the scope to implement it. But you can do it yourself with system rw script, no needs to have rom for that

Can magisk modules work on read only system partition?

 

[Adrixan]

How to ROOT & TWRP and How to Update Base

Root S908B/E/N/0 without TWRP

• Unlock bootloader
• You needs to download stock firmware (You can get stock firmware with Frija) and extract AP*.tar.md5 file and patch with magisk. Flash patched file with AP tab of Odin
• Reboot to recovery and select to format data (Factory reset option on stock recovery)
• Reboot device → You will see Magisk stub in drawer → Update it. (In case stub not there, Donload magisk app from Download area and intall manually) → Open Magisk - It will ask to complete additionl setup, Let it do. → Reboot device. You are now ready to Intall Dr.Ketan ROM module. Move to next step.

Root S908B/E/N/0 + TWRP + How to update/Install base firmware
You can get ready to use root files from download area OR you can get from TWRP thread (link below)

• Download latest firmware as per pre-requisite
• Disable Auto Reboot option in Odin
• Select appropriate slot in Odin for BL,AP,CP and CSC (Using HOME_CSC will keep data, while using CSC* will format data) from stock firmware
• Select TWRP file for USEDATA slot (File must include patched vbmeta file)
• When Flashing completes, disconnect device and starightway reboot to TWRP
• Run multidisabler from TWRP - Advanced - Terminal - and type : multidisabler (it may take few minutes, keep patience)
• Wipe Data (If you are already using Afaneh92's TWRP and used multidisabler + Format data, you can select to Factory Reset too (This will preserve media file) OR you can skip wipe option at all in case you want dirty Install.)
• Reboot to TWRP In case you have wiped data.
• Copy Kernel & Magisk zip to device (Alternatively use USB storage)
• Install kernel (Flash Kernel zip from TWRP)
• Flash Magisk
• Reboot & Update Magisk from stub OR Install Magisk apk
• Open Magisk app and complete setup if it asked for

PS : If you are on any other TWRP or Stock recovery, you must FORMAT DATA (That requires to type 'Yes' to confrm wipe)

Now ready to install Dr.Ketan Module, Follow XDA ROM Changelog post to install ROM Module

Thanks & Credit to Afaneh92 for TWRP & Kernel, below are link for OP Exynos SnapDragon


PS : For detailed instructions about Magisk installation (root) read here. In case still you have question, move to Question forum of S22 section and ask for help. This thread is development thread and any questions related to how to root will be ignored.

Just for clarification: it is impossible to update the firmware without multidisabler when rooted without having to factory reset the device too?
So I must choose between encrypted data and updating with root?

 

[dr.ketan]

Just for clarification: it is impossible to update the firmware without multidisabler when rooted without having to factory reset the device too?
So I must choose between encrypted data and updating with root?

You can't update firmware straightway weather rooted with encrypted data or decrypted data
But in both the case if you perform same setup before rebooting device to system then still possible to update firmware without losing data. (Though strongly recommend to make backup)
Also if you change setup between encrypted to decrypted or vise a versa, you still needs format data.