[10 JAN 2011] [DISCONTINUED] CMN 6.2.0 v2.0 [RMNET/PPP] [OPTIMIZED] [Kernel: ocm_r1]

Search This thread
By:
Advanced…
O

ocm7

Senior Member
Oct 19, 2010
69
170
2552
CMN [CyanogenMod_Nand] 1.02
CyanogenMod 6.1 Desire based.
Nand through magldr 1.09 or higher ONLY. DAF is included in the package (win7 version)

Features:
RMNET as default connection mode
Smartass governer as default
0.7 custom ril wrapper from LeTama in case anyone wants PPP instead
Click to expand...
Click to collapse
Kernel:
ocm_r1.
Click to expand...
Click to collapse
What works:
Everything works for me except of course 720p record/decode.
Click to expand...
Click to collapse
Included:
CM 6.2.0RC Nand Rom
DAF (DFT Android Flasher)
Click to expand...
Click to collapse
Instructions:

  1. Boot phone into magldr and go into Flasher menu. Connect it to the PC and wait for it to recognize it.
  2. Run ANDR_INSTALL.exe in extracted folder from .rar, follow the instructions. If you are updating magldr will prompt you if you want to delete or keep userdata. It is SAFE to keep userdata when updating from 1.0 -> 1.01 -> 1.02
  3. For 2.0 you MUST wipe for best performance.
Click to expand...
Click to collapse
FAQ
[Q] My [insert something here] doesnt work!
[A] Search the thread, its most likely has been fixed

[Q] I get robovoice!
[A] delete or rename /system/etc/firmware/default.acdb

[Q] My apps arent showing fullscreen!
[A] Menu-> Spare Parts -> Uncheck Compatability Mode -> Reboot

[Q] Everything is too small, i want it ginormous again!
[A] Edit /system/build.prop the line ro.sf.lcd_density=200 to ro.sf.lcd_density=240 or some larger value (240 = AOSP default)

[Q] I have this weird problem and it works for everyone else but not for me, whats wrong?!
[A] Every problem is harder to diagnose if its just one person with the problem. If its just you then chances are you messed something up.
Click to expand...
Click to collapse
Additional Information:
This will wipe winmo off your phone. To get it back just flash a stock winmo rom. Also, magldr takes the place of the SECOND bootscreen (there are three stages). So you can flash a first stage bootscreen no problem (I have done this), but do NOT flash a second stage one.
Click to expand...
Click to collapse
Credits:
Rajko
Cotulla
LeTama
Cyanogen
etc.
Click to expand...
Click to collapse
Changelog:
v1.0:

  • Original Release
v1.01:

  • Added RMNET support and as default net connection.
  • Update to Hastarin 8.6. LeTama RIL Wrapper .7.
  • Smartass default governer
v1.01a:

  • Hotfix, Fixed wifi for 1.01 and 1.02
v1.02:

  • Removes quadrant advanced and fixes wifi issues.
v2.0:

  • Custom built CM6.2.0RC optimized for the HD2.
  • Added LED Notification settings.
  • Button backlight settings and RMNET/PPP configurations in CM Settings.
  • Added Wifi MAC address fix in kernel.
  • new LED driver.
  • Revert to 240dpi
Click to expand...
Click to collapse
No need for screenshots, its a stock CM rom built for nand. Quadrant advanced score is around ~1540. You wont be getting any better due to IO, which i doubt can be improved much, if at all. Its fast enough as it is.


Download v1.02: http://www.mediafire.com/?pkb4bht9gtk3axu
Download v2.0: http://www.multiupload.com/CL7MVNPUT0

How to fix wifi (1.02 only): http://www.youtube.com/watch?v=LsghZNqyT70 (Credit to TechBurrow)

Custom HD2 CM Settings are in:
CyanogenMod Settings -> User Interface -> LED Notifications
CyanogenMod Settings -> Input Settings -> Button Backlight
CyanogenMod Settings -> Performance Settings -> Data Connection Mode (requires reboot)

-ocm
 
Last edited:
  • Like
Reactions: stevm, boldman78, Igr1 and 138 others
paocavallo

paocavallo

Senior Member
Apr 17, 2009
272
20
London
sorry for my question.... maybe I'm dumby.... it means we will have just the android operative system installed??? no winmo anymore???

and is it multilanguage and feat every leo device (i.e. european no Tmouse)???
thanx in advantage and congrats 4 your work!
 
  • Like
Reactions: pdazealot
cashyftw

cashyftw

Senior Member
Sep 11, 2010
3,326
451
I'm extremely new to all of this, do I have to put my phone in a special mode or anything, or do I just run the exe file, and my phone will automatically start.

Sorry for the noob question.
 
K

Krendelrus

Senior Member
Nov 17, 2010
716
473
Now with possibility of installing android into nand could we have an opportunity to record 720p videos? or it's limited somehow?

another great milestone for xda-developers, you're the best
 
You must log in or register to reply here.

Similar threads

tytung
  • Locked
[Nov. 10, 2012][ROM][GB][2.3.7][720p] NexusHD2-Gingerbread V3.3a [tytung_gb_r16]
Replies
10K
Views
3M
kinfauns
kinfauns
tytung
  • Locked
[May 25, 2013][ROM][4.0.4][720p] NexusHD2-ICS-CM9-HWA V3.0b [NativeSD]
Replies
12K
Views
5M
kinfauns
kinfauns
tytung
  • Locked
[3.Jan.2012] (Android 4.0.3) (AOSP ICS ROM for HD2) NexusHD2-IceCreamSandwich Beta10
Replies
4K
Views
2M
bzhmobile
bzhmobile
tyween
[12 DEC 2014][MAGLDR/cLK]TyphooN CyanogenMod 7.2.0.1 v3.9.0[2.3.7][A2SD+][tytung r14]
Replies
22K
Views
7M
majored
majored
dungphp
[DISCONTINUED] Pyramid HTC WWE 1.35.401.1 - Real 3D [V2.5 Final][Herios 1.8.3nob]
Replies
8K
Views
2M
AKASHIK
AKASHIK

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 141
    O
    ocm7
    CMN [CyanogenMod_Nand] 1.02
    CyanogenMod 6.1 Desire based.
    Nand through magldr 1.09 or higher ONLY. DAF is included in the package (win7 version)

    Features:
    RMNET as default connection mode
    Smartass governer as default
    0.7 custom ril wrapper from LeTama in case anyone wants PPP instead
    Click to expand...
    Click to collapse
    Kernel:
    ocm_r1.
    Click to expand...
    Click to collapse
    What works:
    Everything works for me except of course 720p record/decode.
    Click to expand...
    Click to collapse
    Included:
    CM 6.2.0RC Nand Rom
    DAF (DFT Android Flasher)
    Click to expand...
    Click to collapse
    Instructions:

    1. Boot phone into magldr and go into Flasher menu. Connect it to the PC and wait for it to recognize it.
    2. Run ANDR_INSTALL.exe in extracted folder from .rar, follow the instructions. If you are updating magldr will prompt you if you want to delete or keep userdata. It is SAFE to keep userdata when updating from 1.0 -> 1.01 -> 1.02
    3. For 2.0 you MUST wipe for best performance.
    Click to expand...
    Click to collapse
    FAQ
    [Q] My [insert something here] doesnt work!
    [A] Search the thread, its most likely has been fixed

    [Q] I get robovoice!
    [A] delete or rename /system/etc/firmware/default.acdb

    [Q] My apps arent showing fullscreen!
    [A] Menu-> Spare Parts -> Uncheck Compatability Mode -> Reboot

    [Q] Everything is too small, i want it ginormous again!
    [A] Edit /system/build.prop the line ro.sf.lcd_density=200 to ro.sf.lcd_density=240 or some larger value (240 = AOSP default)

    [Q] I have this weird problem and it works for everyone else but not for me, whats wrong?!
    [A] Every problem is harder to diagnose if its just one person with the problem. If its just you then chances are you messed something up.
    Click to expand...
    Click to collapse
    Additional Information:
    This will wipe winmo off your phone. To get it back just flash a stock winmo rom. Also, magldr takes the place of the SECOND bootscreen (there are three stages). So you can flash a first stage bootscreen no problem (I have done this), but do NOT flash a second stage one.
    Click to expand...
    Click to collapse
    Credits:
    Rajko
    Cotulla
    LeTama
    Cyanogen
    etc.
    Click to expand...
    Click to collapse
    Changelog:
    v1.0:

    • Original Release
    v1.01:

    • Added RMNET support and as default net connection.
    • Update to Hastarin 8.6. LeTama RIL Wrapper .7.
    • Smartass default governer
    v1.01a:

    • Hotfix, Fixed wifi for 1.01 and 1.02
    v1.02:

    • Removes quadrant advanced and fixes wifi issues.
    v2.0:

    • Custom built CM6.2.0RC optimized for the HD2.
    • Added LED Notification settings.
    • Button backlight settings and RMNET/PPP configurations in CM Settings.
    • Added Wifi MAC address fix in kernel.
    • new LED driver.
    • Revert to 240dpi
    Click to expand...
    Click to collapse
    No need for screenshots, its a stock CM rom built for nand. Quadrant advanced score is around ~1540. You wont be getting any better due to IO, which i doubt can be improved much, if at all. Its fast enough as it is.


    Download v1.02: http://www.mediafire.com/?pkb4bht9gtk3axu
    Download v2.0: http://www.multiupload.com/CL7MVNPUT0

    How to fix wifi (1.02 only): http://www.youtube.com/watch?v=LsghZNqyT70 (Credit to TechBurrow)

    Custom HD2 CM Settings are in:
    CyanogenMod Settings -> User Interface -> LED Notifications
    CyanogenMod Settings -> Input Settings -> Button Backlight
    CyanogenMod Settings -> Performance Settings -> Data Connection Mode (requires reboot)

    -ocm
    View
    10
    O
    ocm7
    Sorry about the wifi guys, that was a stupid mistake on my part. I am currently uploading v1.2 which is updated to CyanogenMod 6.1.1, 240dpi is back and the new gingerbread keyboard is installed.
    View
    7
    mstrk242
    mstrk242
    To Fix Wifi

    Use these files, and run the following from terminal to fix wifi:
    su
    rm -f /system/lib/modules/*
    cp -f /sdcard/hotfix/* /system/lib/modules
    chmod 755 /system/lib/modules/*

    Or, you can import the enclosed hotfix.sh to gscript lite if you are uncomfortable in the terminal. Either way, unrar this to the root of your sdcard (so all files are under hotfix/ directory on it). If you do import the sh file into gscript, be sure to give check the su box.

    If you are doing the above commands yourself, which is probably easier, you do not need the script, just the rar file.
    View
    5
    S
    shanz707
    hi mate this how i change my lcd
    download es file explorer on the market
    open it.and on the upper left pres the sd card sign to make it look like house (home means your in the internal memory)

    the scrol down to "system" and find and click on build.prop.and open it with "es note editor"

    then find ro.sf.lcd_density.

    i change mine to only 220.=) the letter on the setting is too big for 240=)
    View
    4
    Auramaster
    Auramaster
    Wi-Fi Fix for NON-Data plan users

    If you don't have a data plan, try it this way...

    -First extract CM6.1_1.01A from the OP
    -Next, place the gscript and hotfix folders to the ROOT of your SDcard

    Disconnect your phone from your PC...

    -Now open "Terminal Emulator" (app on your phone) and type the following exactly word for word

    Code: 
    $ SU

(Accept the superuser permission popup, then the # should show up)
 
rm -f /system/lib/modules/*
cp -f /sdcard/hotfix/* /system/lib/modules
rm -rf /sdcard/hotfix
rm -rf /sdcard/gscript/fix.sh

    Enable Wi-Fi and it should work!

    Hope I helped :)
    View

New posts