Hello,
it seems, that futurshocks rom is discontinued...
V7 is not online.
So the above question may be obsolete?
If you're lookin for an alternative, have a look at ladyboos miui-rom:
http://xdaforums.com/showthread.php?t=1028693#
Ciao,
Joachim
Ps. Thanks again to futureshock who did a great work until May...
install with clockwork mod, wipe data, wipe cache, wipe dalvik (under advanced)
to get fancy widget or clock widget, just move the apps that pops up on first page to the last... or set homepage to the left of the default where the empty folders are (as in my screenshots in 2nd Post) and add there the clock widget...
for general ClockworkMod Recovery Instruction and Questions look in this thread! LINK!
or this
LINK2!
you also can watch this Video to get some Infos and Instructions LINK
Features/benefit of using ClockworkMod Recovery instead of "nativ" NAND Flash:
- Flash ROMs in update.zip format
- Backup and restore ROMs using Nandroid
- Flash ROMs from the SD card without use of a PC
- Easilly Wipe all Data/Cache
- Repartition SD card for use with Apps2SD
- Full Root ADB access
- Fix app permissions
The best thing on ClockworkMod is that you can Backup your DATA Partition (all you installed and configured inside MIUI) when not using Data.img on SD Card! Its still a recommendation to wipe (clear) your "Data Store"!
Additionally its possible to apply small fixes or even some new Stuff over an update.zip without needing of full reflashing the hole ROM!
Install ClockworkMOD:
--> Download FutureShocks Custom ClockworkMOD v2 <--
Here you can my Custom ClockworkMOD for MIUI v2, i have configured the installation process completly for you, so you just have to flash this packet to you phone...
i recommend to have the latest MAGLDR version (1.13 for now)
then go to the "USB Flasher" in MAGLDR, connected to your PC and launch the "DAF.exe"
after that process the partion layout in NAND is set correctly and the ClockworkMOD is installed in NAND too and you can launch it from MAGLDR!
latest Version: v7
MIUI Base: 1.5.13
based on Android 2.3.4 aka Gingerbread!
Multilanguage
known Problems with this Build:
₪general miui gingerbread problem is that there is NO! "first time run setup wizard" so the first bootup will be in german! after that you can change the language in settings menu... sorry but i'm german and a long time ago i did this for the german guys here
₪
Freeware for you! But very time consuming for me!
If you wanna spend me a beer, for the time that i put into this build and to upload and support this here, please donate a few bucks ($€) by PayPal, Link is in my signature below! THX!
Donators <- Thank you!!:
- tRIACTIs
- fabrizio n.
- Tim V.
- Andreas W.
- Julio77
- Dario R.
- oversizzed
FAQs & Fixes
If you don't found your Question/Answer here, please befor posting use "Search this Thread" i'm pretty sure everthing gonna talked about allready.
- Q: ThemeManager ForceCloses when using Online Browser
A: deleting Cache Folder in MIUI Folder on SD Card helped me.- Q: missing QERTZ Keyboard
A: Download new Keyboard from here: Download unpack and put update folder on root of your SD Card! Update gets applied on Reboot, if new Keyboard is here its safe to delte the Folderstructure...- Q: how can i get Wireless Tethering to work
A: Get Wireless Tether Software from here: Link- Q: can i keep old data.img
A: don't ask... just try... i cant say... it could be possible that something changed... if you notice some Problems try with a clean/new Data.img File![/SIZE][/COLOR]- Q: how can i activate the torch light?
A: Pulldown the Statusbar, on the right side there you'll find the Torch/Flashlight App!- Q: Adobe Flash isn't working?!
A: Download latest Adobe Flash from Market!- Q: Message & Ringtones won't make a sound?
A: set an ringtone and notification tone in settings...- Q: how can i remove stock apps? i can't delete these with a normal file manager.
A: There are different ways of dooing this, first thing i suggest is just to simplay move the unwanted to an Folder or you do it like i do: DL Droidexplorer, install and then navigate with a CMD Shell to following Path: "c:\program files\droidexplorer\SDK\tools" type "adb remount" you should see following messag "remount succeeded" after that launch DroidExplorer and remove/edit/add an apk at "/system/app/". Your HD2 with running MIUI has to be connected trough USB to your PC obviously
Preloaded Apps:
Freespace on NAND:
~160MB
a bit limited because EU HD2 Space limit when not using data.img on SD!
These Apps are builtin System Apps! Limited to the minium i think!
- Google Apps (GMail, Market, Calender, Maps)
- Miren Browser (MIUI or charming Browser)
- MIUI Backup
- Superuser
- FM Radio
- MIUI Music
- XDA-Dev App
- YouTube
- Compass
- CurrentWidget
- FancyWidget
- AdFree
Functions:
Theme Support
WiFi & AdHoc
GPS
3g/HSDPA
FM Radio
5MP C/Kamera with 16:9 & Camcorder
LED status notification
Keypad notification
bluetooth <- Batterydrain in Standby should be fixed now!
USB mass storage
G Sensor
Screenshots
post V4:
pre V4:
[
Themes:
Cartoon:
caozhi:
Crystal:
Tuotuo:
Buuf:
Watermelon:
MyTheme2.0:
Tenuis:
Short Video Walktrough:
http://www.youtube.com/watch?v=5Tj46HFYnb8
Archive
1. Installation
at least MAGLDR 1.09
WHILE hold the boot (right after the first white HTC boot screen) the power button to get into the MAGLDR Loader
where "4 USB Flasher" Mark via "Vol +" & "volume"button. With "off " button (green key ") to confirm.
Then plug it in USB and restart the PC the "DAF.exe"(in Win7/Vista necessarily "as administrator" to run or you get a "usb init failure" ... (I've set on the exe, no idea whether he packed with added ...)
2. Deinstallation
for deinstallation of NAND Android, just flash shipped WinMo ROM
3. data.img Support (default 1GB)
To enable data.img on sdcard feature
- Copy '.data' folder to sdcard (/sdcard/.data).
- Copy your old data.img to '.data' directory, otherwise a new data.img will be created.
- Boot into Android.
~~~
To disable data.img on sdcard feature
- Delete 'config.txt'.
- Delete 'data_img=1' in the 'config.txt'.
~~~
Options in /sdcard/.data/config.txt
data_img=0
- 0, default nand userdata
- 1, enable external data.img support (/sdcard/.data/data.img)
data_size=1024 (128,256,512,768,.... whatever you want)
- size of data.img, only work when data.img support enabled
data_sync=1
- 0, fast, disable sync option when mount data.img
- 1, safe, enable sync option when mount data.img, use this if experiencing data corruption
lcd_density=240
- size of icons
gps_zone=us
- country code, us, fr, jp, etc
if you're using data.img option, first boot takes longer because data.img file gets created
Additional Switches with new INITRD from 19.1.2011:
- ppp_use=0 (choose between RMNET and PPP)
- magldr_boot=1 (for Booting from NAND or via MAGLDR "Boot AD SD")
- onsd_card=0 (for Booting from Haret or via MAGLDR "Boot AD SD") <- needs to be set to 0, preset in config.txt but if you delete the line the default in initrd is 1 !!
You propably have to combine the each Options, espacially you need magldr_boot and onsd_card set to 1 (default) if you want to Boot "MAGLDR Boot AD SD")
--> Download ClockworkMOD <--
Unpack Download, copy content from "copy_to_sd_root" Folder onto your SD Card (e.g.: via MAGLDR USB Mass Storage). Get into MAGLRD "USB Flasher" Mode and start DAF.exe (as ever with Admin Rights) from ClockworkMOD and let the tool partition your SD Card! WARNING: All data in NAND get erased (data.img File on SD will not get touched!)
Download my ClockworkMod Archiv, in this File there you'll find the ".data" Folder again if you still wanna use the "data partition" (data.img) on SD Card and an update.zip File, copy this file on you SD Card. To get into ClockworkMod hold down Power Button on MAGLDR Loader and launch "Boot AD SD", there you can navigate (like in MAGLDR) to "install zip from sdcard", "apply /sdcard/update.zip" (as we copied it before), get to "Yes - Install /sdcard/update.zip" and again confirm with "Green/Answer" Key.... wait .... reboot... finished
Download Archive
Download v4
Download German v3
Download German v2.4 Update
Download German v2.3 ClockworkMOD Version
Download English v2.3 ClockworkMOD Version
Download France v2.3 ClockworkMOD Version
Download German v2.2 Version
Download English v2.2 Version
Download France v2.2 Version
Download German v2 Version
Download English v2 Version
Download German/English v1 Version
Download France v1 Version
Download Italy v1 Version
Download "Stock Android 2.2.1 Keyboard"
Changelog:
Code:[U]v7:[/U] MIUI Base: 1.5.13 based on Android 2.3.4 aka Gingerbread! GPS&Proximity Sensor working [U]v6 & v6.1:[/U] MIUI Base: 1.4.29 [U]v5:[/U] MIUI Base: 1.4.22 [U]v4:[/U] MIUI Base: 1.4.1 based on Android 2.3.3 aka Gingerbread! Multilanguage [U]v3:[/U] updated to MIUI 1.1.14 Base new INITRD File with a few new option switches [U]v2.4:[/U] German ClockworkMOD Update Release ony, updated German Language Pack! [U]v2.3:[/U] ClockworkMod Version with fixed Keyboard (added Gingerbread Keyboard) [U]v2.2:[/U] removed unneeded miui Apps and Wireless Tether (because it force Closes on activation) added new CM7 Email.apk (credit to shafty023) [U]v2.1 (not released to pulic!):[/U] added missing Apps (like FancyWidget) [U]v2:[/U] update to MIUI 1.1.7 updated/added/removed some Apps [U]v1:[/U] MIUI Base: 12.31 Kernel: prj v0.3/kouno initial NAND Release
IMHO there's been enough of a hype building exercise. Any longer, and people's interest in this particular rom might start fading away.