[18/12]{CM12-Unofficial} T0lte-Everything Almost Work+Incall

[JOKER.SOHA]

First, all we are say "thank so much" to @sbrissen shared this build for t0lteXX. and i'm only shared it again for every one.
Original thread by him : http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
New Build from @sbrissen :
Rom (18/12) : https://www.androidfilehost.com/?fid=95857557620393640
Changed : Fixes keyboard problem, camera issue, and wifi causing soft reboots
Gapps : https://www.androidfilehost.com/?fid=95832962473400228
A>.How To install :
use recovery philz_touch 6.48.4 or TWRP 2.8.1.0 for t0lte
1.full wipe data/factory reset, format system, wipe davilk cache.
2.flash rom + gapps
3.wipe davilk cache/data cache
reboot
B>.Work/Not work?
1.Data and service, 3G/LTE work too fine.
2.Camera work with mode front, please use camera google from CHplay (Flash SHIFT-CM12, camera work fine)
3.Video clip work full and fine, too play with Sound and picture.
4.Call Out/receive and sms/mms
5.Music.
6.sensor promixity in call need fix by flash this file (if it have issues) :
https://mega.co.nz/#!1xkSxTDJ!o8DQkNT6UvjNoxfgoxjNq2UnZz_6bO3ivYwMmvRv7dc
7.GPS, still not yet know work?maybe work
8.NFC not work.
9.Volume sound on call very low (gently press button volume down=>sound volume will normal)
and any more maybe work, if you find any issues, please contact or report @sbrissen, to him fix it.
C>.How To Enable NavBar Button Show On Screen With Rom CM12 :
Flash it with recovery : http://goo.gl/IoELzQ

More screenshot see here : https://plus.google.com/u/0/communities/111794388121646986594

 

[joethc]

Awesome I am going to flash this now! Thanks for the updater-script!

 

[Joshua Mr PC Repair]

link to rom

Bad gateway , can you update the link

 

[xu7jp4]

:good:Good works Man:good:

 

[thershope]

Thanks for ROM. Can you please explain how to flash file updater-script? I see two files now and not sure which one to flash and how. I have AT&T Note 2 (t0lteatt)

Update: Bootloop at Cyanogenmod icon. Not booting to device.

First, thank to @sbrissen shared this build. and I just edited and guided a little wave to the mobile data network for every one
Original thread for him : http://forum.xda-developers.com/note-2-verizon/orig-development/rom-cyanogenmod-12-0-t2967940
Link Rom : https://www.androidfilehost.com/?fid=95832962473400226
you need replace/instead file updater-script by download file attachments below=> so, you can flash it.
Gapps : https://www.androidfilehost.com/?fid=95832962473400228
How To install :
A>use recovery philz_touch 6.48.4 or TWRP 2.8.1.0 for t0lte
1.flash rom + gapps
2.wipe davilk cache/data cache
reboot
first time, skip anyway... all setup wizard, goto Language & Input/select Curent keyboard and check Hardware to show keyboard.
Goto settings/Developer options :
Find and check select all five options : Aggressive Wi-Fi to cellular handover and Enable Wi-Fi Verbose Logging, Wireless display certification and Always allow Wi-Fi Roam Scans.
next is turn on wifi and goto Wireless & networks/... More/Cellular networks/turn on Data roaming and select options GSM/WCDMA/LTE in Preferred network type => Servicer Mobile Data Network show and work fine.
B>Work?
1.Data and service, 3G work fine
2.Camera work with mode front, please use camera google from CHplay.
3.Video clip work full and fine, too play with Sound and picture.
4.Call and sms
5.Music....
and any more, if you find any issues, please contact or report @sbrissen, to him fix it.

More screenshot see here : https://plus.google.com/u/0/communities/111794388121646986594

 

[JOKER.SOHA]

Thanks for ROM. Can you please explain how to flash file updater-script? I see two files now and not sure which one to flash and how. I have AT&T Note 2 (t0lteatt)

Update: Bootloop at Cyanogenmod icon. Not booting to device.

Nope, note att work fine, i'm sure. you need replace this file name : updater-script-t0lteXX-l900.rar
patience waiting it boot on up ok................... see screenshot, hey mate

 

[thershope]

I did wait for more than 20 mins and the device did not boot. I will try again from the beginning. Just to confirm, how to flash the .tar files? Same as .zip in CWM ?

Nope, note att work fine, i'm sure. you need replace this file name : updater-script-t0lteXX-l900.rar
patience waiting it boot on up ok................... see screenshot, hey mate

 

[JOKER.SOHA]

I did wait for more than 20 mins and the device did not boot. I will try again from the beginning. Just to confirm, how to flash the .tar files? Same as .zip in CWM ?

nope, you need make step :
use recovery philz_touch 6.48.4 or TWRP 2.8.1.0 for t0lte
1.full wipe data/factory reset, format system, wipe davilk cache.
2.flash rom + gapps
3.wipe davilk cache/data cache
reboot

 

[Binary_File]

Could you explain me step by step how I have to do to replace the updater-script to flash the ROM?

 

[jlmancuso]

Could you explain me step by step how I have to do to replace the updater-script to flash the ROM?

Open rom with 7zip and replace updater with modified one then exit 7zip. Now copy rom to device and flash.

Sent from my SPH-L900 using XDA Premium 4 mobile app

 

[Razorbeast19]

So this rom will work fine on t0lte international N7105? Just want to make sure before I flash it. Thanks.

Edit: Nevermind, didn't look at screenshots. Haha.

 

[bitcasual]

So this rom will work fine on t0lte international N7105? Just want to make sure before I flash it. Thanks.

Edit: Nevermind, didn't look at screenshots. Haha.

Yes, I did just flash this on my n7105 and it works. Work good even. Remember to wipe dalvik and cache after install but before reboot.

 

[wilson3q]

Yes, I did just flash this on my n7105 and it works. Work good even. Remember to wipe dalvik and cache after install but before reboot.

Great Rom!
Works: Call, SMS, data, front camera, video/sound/music, wifi + wifi AP.

Doesn't work:
back camera.
(edit: After flashing Shift CM12 kernel, camera works! But shift cm12 kernel not as smooth as the default kernel. Also baseband may have problem again.)

Keep the good work!

-----------------------------------

I changed Prefered network type to "GSM/WCDMA/LTE preferred" (under Cellular network setttings), so phone call seems working now.

 

[winxuser]

Great Rom!
Works: Call, SMS, data, front camera, sound/music, wifi + wifi AP.

Doesn't work:
Video playback, back camera.

Keep the good work!

-----------------------------------

I changed Prefered network type to "GSM/WCDMA/LTE preferred" (under Cellular network setttings), so phone call seems working now.

back camera worked for me and so did video playback

 

[wilson3q]

back camera worked for me and so did video playback

After I flashed Shift CM12 kernel, back camera works...
Videos captured by camera can play well...

 

[spinekiller1]

kernel

After I flashed Shift CM12 kernel, back camera works...
Videos captured by camera can play well...

can you send me a link to the kernel

 

[winxuser]

after installing a few apps, its become pretty unresponsive and wifi stopped working?? not sure if its just me tho

---------- Post added at 02:46 PM ---------- Previous post was at 02:16 PM ----------

calls don't work for me,, sms are ok

 

[wilson3q]

can you send me a link to the kernel

URL by @rogersb11:
https://www.dropbox.com/s/97gwv1ticia4bk7/Shift-CM12.zip?dl=0

But after flashing shift kernel, back camera works, but other things will break, e.g. baseband. Also the rom become not so responsive and stable.
Better wait for the true CM12 build from t0lte (not this device i605)...

---------- Post added at 06:04 AM ---------- Previous post was at 06:00 AM ----------

after installing a few apps, its become pretty unresponsive and wifi stopped working?? not sure if its just me tho

---------- Post added at 02:46 PM ---------- Previous post was at 02:16 PM ----------

calls don't work for me,, sms are ok

Mine still quite responsive after installing 10+ apps...I am using the default kernel with the rom. Not shift cm12 kernel.
Change your prefered network type to the correct one for your carrier..and call will work.

 

[winxuser]

URL by @rogersb11:
https://www.dropbox.com/s/97gwv1ticia4bk7/Shift-CM12.zip?dl=0

But after flashing shift kernel, back camera works, but other things will break, e.g. baseband. Also the rom become not so responsive and stable.
Better wait for the true CM12 build from t0lte (not this device i605)...

---------- Post added at 06:04 AM ---------- Previous post was at 06:00 AM ----------


Mine still quite responsive after installing 10+ apps...I am using the default kernel with the rom. Not shift cm12 kernel.
Change your prefered network type to the correct one for your carrier..and call will work.

ahaha woops yeah I forgot to change network type,,, but after a couple minutes on a call the line goes all static and I cant hear anything

---------- Post added at 03:22 PM ---------- Previous post was at 03:10 PM ----------

Seems like the preferred network doesn't save once it reboots it changes again

Sent from my SCH-I605 using XDA Free mobile app

 

[Voyebanm]

hi
i follow your thread and still having the same issue. i can send an receive text messages. i can call out but i cannot receive call. the person calling me gets the ring and then to my voicemail which i receive. i replaced the script as indicated. i check the status of the cellular network state and it says Disconnected.. The model still shows as i605. i have the i317m