[19.07.22] I N975F I N976B I N976N I N970F I Dr.Ketan ROM I OneUI 4.1 I OneUI 3.1

[starpandi2004]

I installed the ROM and then ran it Fix, then deleted everything again in Magnistics and restarted, but the bank app does not work :-(

in here india, every banking apps works except SBI credit card.

 

[OzBoy1]

I installed the ROM and then ran it Fix, then deleted everything again in Magnistics and restarted, but the bank app does not work :-(

Dirty flash?

 

[Handymann007]

Nothing is require to install, just people needs to read changelog post and basic knowledge about magisk
It's explained in changelog post
Remove all mods installed for SafetyNet fix
Apply Essential fix form rom tool
Enable magisk hide from magisk settings
Rename (hide) magisk app from setting
Hide apps in magisk hide
Thats it

No matter what I do, the bank app doesn't work because of root. If I do the Rome via another Rome, it also reports that I have root, but the app opens and so on.

 

[Abdulrahman91]

No matter what I do, the bank app doesn't work because of root. If I do the Rome via another Rome, it also reports that I have root, but the app opens and so on.

Same thing for me. However, there are some bank apps that started working fine after "the hide Magisk" thing.

 

[Vishnarov]

No matter what I do, the bank app doesn't work because of root. If I do the Rome via another Rome, it also reports that I have root, but the app opens and so on.

One untraditional decicion is to try virtual envoirment, Install unrooted ROM in rooted phone in VMOS and try to inatall bank app in.

 

[Hazel1234]

Hi Doc,

i have a strage issue with my s-pen. it stopped working after flashing from your rom (android 10) to stock 11. i wanted to clear as much hints as possible before sending in for display repair)
the strange thing is, after flashing stock the s-pen stopped working, the bluetooth function and even the touch with s-pen is not responding. the s-pen works on different devices but other s-pens dont work on my note 10+. i gues the driver for the digitizer i corrupted
i have made a rookie mistake... my phone is a n976b but i tried to flash a n975 stock rom (was orientating in systeminfo in your rom)
maybe there went something wrong...
after several attempts to flash stock even with explicit pit file and different stock roms (current ap version is 7) there is still no luck with s-pen.

i tried to ask in Q&A section but no one suggested some in depth advise. every other hint on xda was tried without any luck

do you have a idea how to fix this?

i tried even to update the wacom ic driver (*#2663#), but the information written there is just: not availiable.

thank you very much for any help!

 

[jays note 2]

Hi Doc,

i have a strage issue with my s-pen. it stopped working after flashing from your rom (android 10) to stock 11. i wanted to clear as much hints as possible before sending in for display repair)
the strange thing is, after flashing stock the s-pen stopped working, the bluetooth function and even the touch with s-pen is not responding. the s-pen works on different devices but other s-pens dont work on my note 10+. i gues the driver for the digitizer i corrupted
i have made a rookie mistake... my phone is a n976b but i tried to flash a n975 stock rom (was orientating in systeminfo in your rom)
maybe there went something wrong...
after several attempts to flash stock even with explicit pit file and different stock roms (current ap version is 7) there is still no luck with s-pen.

i tried to ask in Q&A section but no one suggested some in depth advise. every other hint on xda was tried without any luck

do you have a idea how to fix this?

i tried even to update the wacom ic driver (*#2663#), but the information written there is just: not availiable.

thank you very much for any help!

reset your spen that should fix it, go too settings and in search bar type in Spen, tap on Air Actions then click on 3 dots in top right then select Reset Spen from drop down menu

 

[jays note 2]

reset your spen that should fix it, go too settings and in search bar type in Spen, tap on Air Actions then click on 3 dots in top right then select Reset Spen from drop down menu

also if you want too use other S pens on your device makes sure you have " USE MULTIPLE S PENS" Option enabled.

 

[Hazel1234]

also if you want too use other S pens on your device makes sure you have " USE MULTIPLE S PENS" Option enabled.

Hi Jay,

thank you for this idea. But i tried it without any success. And testet reconnecting too.

Any other ideas?

 

[jays note 2]

Hi Jay,

thank you for this idea. But i tried it without any success. And testet reconnecting too.

Any other ideas?

hey Hazel, how many times did u try? I know I had to do at least 3 times before it finally did it.

 

[Hazel1234]

hey Hazel, how many times did u try? I know I had to do at least 3 times before it finally did it.

Hi jay,

tried it about 30x times... no luck. The bluetooth connection of the pen is not so imortant. but using the pen on screen is also not possible.

i guess the issue is dug more down...

i was thinking about flashing a custom kernel and try to update the wacom FW.
or does anyone habe the wacom FW Update file for interlan storage?

 

[jays note 2]

Hi jay,

tried it about 30x times... no luck. The bluetooth connection of the pen is not so imortant. but using the pen on screen is also not possible.

i guess the issue is dug more down...
View attachment 5449183

i was thinking about flashing a custom kernel and try to update the wacom FW.
or does anyone habe the wacom FW Update file for interlan storage?

I'm stumped, one would think flashing stock several times would have fixed it even with the Pit file on hand. so you've flashed stock 9 and 10 to no avail, was a Factory reset done after flashing either????? I know it sounds stupid, lolz....
if your willing to give it another go, flash stock again and before you boot up for the first time, perform a Factory rest, hopefully it'll overwrite whatever system files that are corrupted.

 

[dr.ketan]

Testing R12 (Nov security patch) now.

 

[jays note 2]

Testing R12 (Nov security patch) now.



View attachment 5452991

Hey Doc, is R12 ready? Rom tweaks has alerted me too the update. downloading now.

 

[jays note 2]

Hey Doc, is R12 ready? Rom tweaks has alerted me too the update. downloading now.

Neverming Test build. I'll cancel & wait til you've made it official

 

[dr.ketan]

ChangeLog R12 (For N975F & N976B/N)

• Based on N975FXXS7FUJ1 Nov security patch
• SafetyNet : SafetyNet Pre-Fixed. But don't know pre-fixed one how long works (depending on how google patches), In that case there is another option in ROM Rool to fix SafetyNet (Don't install every F* craps to fix SafetyNet fix), Only Use ROM Tool - Mods & Misc Fix - SafetyNet Fix in case Pre-Fixed SafetyNet fails.
• Dolby digital plus : Sound mode one click installer in ROM Tool - Mods & Misc fix - Install Dolby Atom. In case effect doesn't stay, reboot one more time will fix it.
• Option for N9876B dual SIM in aroma (Completely untested, if that doesn't work, simply use N976B singl sim option as earlier).
• All features of previous version will remain same except if mentioned above.
• TweaksPro users needs to update to TweaksPro 3.0.2 or up.

Samsung base Changelog

• The security of your device has been improved.

Some Important things to note

• Very soon after first boot, you needs to open magisk app and complete required set up if it asked for.
• After this open ROM Tool and apply essential fix.
• TWRP available in download area is official TWRP and Android 11 based, Here is thread for TWRP discussion Thanks to corsicanu
• Included DrKetan/Cruel kernel which is compiled with source code from cruel-kernel Thanks and credit to @ evdenis for kernel. Here is OP for kernel & source code

Importan notes for N976B/N

• This ROM is fully Single ROM for N975F and N976B/N ,While flashing ROM, N976 must select N976 kernel from aroma.
• N976 may have network only after Applying ROM Tool essential fix + Reboot. ROM Tool with detect device and patch it accordingly.

Important notes for N970F
ROM zip for N970F is separately available in respective folder in download area. Rest of instruction will remain same.
Further development for N970F is on hold till further notice (Please don't bug with ETA)



ROM features :

- NO more Combo key requires, simple reboot will always reboot with root and any tool showing Reboot to Root will reboot to TWRP without holding any key.
- Ad Free QS Panel Toggle
- Secure Folder working now.
- Recovery QS Panel Toggle (Reboots device to TWRP) PS : This needs custom kernel with built in magisk
- More secure OEM patch.
- S Pay with Gear wearable (Only supported models) - Provided you have installed required packages and hidden 'pay' stuff with magisk hide.
- High Volume warning disabled
- Debloated unnecessary craps (tried to preserve most functions though)
- Dex to PC should work out of box
- Pre fixed Titanium freezing while restoring apps
- Added some important samsung stuff

1. Calculator
2. Music
3. S Health

- Probable fix for Titanium Backup schedule
- Internet browser Secret mode
- S Health patch for using with rooted device.
- ROM Tool with following Options

• Long Press Home customization : Select Device assistance as LP Home from settings, then select if you want to use it to assign to any
• S21 features included
  • Zero Page with Google/Samsung Free options
  • Gallery Object detection and removal
• Navigation Bar height
• Scloud enable/Disable
  You can swap between Old/New anytime, simple click on required version and previous will auto deleted.
• AdFree mode Enable/Disable
• ROM Control - See below
• StatusBar Icons
• Good Lock
• Custom Fonts
• Youtube Vance installer
• StatusBar Icons
  • Show/Hide 3minit battery
  • Show /Hide stock clock
  • Show /Hide 3minit clock
  • Show/Hide multiple icons (QuickStar)
• Mods & Fix
  • Auto Call Record
  • Titanium Backup Fix - In case TB force closes even after uninstalling/Reinstalling
  • Google Pay fix
  • Amazon & Netflix HD enable/Disable
  • SafetYNet Fix
  • GoodLock (No CSC limitations) - Not available as of now.
    • LockStar
    • QuickStar
• Update & Fix

- ROM Control

• Battery Bar with thickness and color option
• Network meter with Toggle (Lt/Rt/Quick Panel/None) with color option
• Virtual Key with Toggle (Lt side - Menu, Rt side - Power, Centre - Home)
• Double tap statusbar to sleep

PS : There may be few more options in ROM control but won't work if those are not mentioned here.

Recommended Installation Steps :

Download area have txt file for Installation guide according your existing setup, follow it to the letter.

Some Tips :

- We Don't recommends/supports dirty flash, but one thing to note, you always should remove lockscreen & Biometric data before flashing ROM in case you gonna flash dirty.

- MultiDisabler is require only those, who want to use stock ROM + TWRP. If you want to flash DrKetan ROM, DONT FLASH MULTIDISABLER or Any othet FIX

- DON'T INSTALL ANY DISABLER/BT FIX/MAGISK anything after flashing ROM, as ROM already pre patched for all these stuff. Additionally flashing may cause issue.

- You shouldn't WIPE device after flashing ROM, but It should be before flashing ROM.

- It may take 6-7 minutes to finish installation. once installation finish, select reboot to system

- After this first of all open magisk and check if installed correctly, If it ask for complete additional setup, let it do and reboot.

- I recommend to disable magisk notification (Magisk - setting - superuser notification - none (This will make mods to work much faster)

After looking magisk is installed properly, open ROM Tool and apply essential Fix - Reboot device after applying essential fix

- If you are using Gear watch or other accessory, setup it and finish rest of personal installation.

Done !

Special Note for Gear wearable & Gear SPay

Spay (Gear) working out of box (As per my test), provided you have installed required apps.
To connect it flawlessly,
1.Clean Install ROM + Open ROM Tool and Apply Essential Fix - Reboot
2.Make sure Magisk manager safetyNet check pass
3.Connect gear with Bluetooth (Gear should factory reset) and this will auto install all required apps.
Once Gear connects, simply open Samsung Pay from Galaxy Wearable app - Hide it in Magisk Hide and you should able to add card.

Important : If you want to use EdXposed with Gear Spay then first add your card before installing EdXposed

I recommend clean Installation only. If you are able to handle consequences with dirty flash then proceed, but don't post bugs in forum without clean installing ROM.


Tips,AddOn & Fix

- 3 minit users can use 3minit battery paid version for free. Check this (Thanks to gharrington )

- Stuck while flashing something (Bootloop), How can I reboot to download
There is a golden rule that always works when you stuck anywhere (bootloop). Follow this -
1.Plugin device to PC
2.Keep holding power + vol down
3.As soon as screen goes blank, keep holding vol up + vol down (here you needs to be quick)
And you are in download mode.

- Read ROM Tool - Update & Fix if any new available.

Download : https://drketanrom.com/

This is a customized ROM and for end users only, ROM or any part of ROM/mods not allowed to redistribute,modify or to use as base to prepare new ROM/ part of other ROM.

 

[dr.ketan]

Important :

https://twitter.com/i/web/status/1457932566846062594

MagiskHide officially dead now!
Prefixed safetynet fix may be broken on R12 now, Still SafetyNet fix may work from ROM Tool - Mod & Misc Fix - SafetyNet Fix

 

[dr.ketan]

R12 is Online now. Must read changelog above specifically about SafetyNet fix















.

 

[nmdung9x]

No issue when dirty flash from R11 on N976N
SafetyNet passed!

Thank Doc

 

[srdempster]

Important :

https://twitter.com/i/web/status/1457932566846062594

MagiskHide officially dead now!
Prefixed safetynet fix may be broken on R12 now, Still SafetyNet fix may work from ROM Tool - Mod & Misc Fix - SafetyNet Fix

Dirty flash from R11 to R12 and still works, excellent works and thanks for fast update