[2017.04.14][ROM][markw][6.0.1][UNOFFICIAL] Lineage OS 13 for Redmi 4 Prime

Search This thread

mikey000

Senior Member
Dec 6, 2011
284
23
Malang
I flashed the rom in TWRP, after that I rebooted, set the basic things until I got to the homescreen. Then I turned off the phone, booted into TWRP and flashed mKernel-LOS-M-R2.zip. Then I rebooted and it just stuck in bootanimation.
i am using 0506 build , flash rom, Gapps, magisk, not flashing any kernels, everything works fine
edited
also notice this rom working faster with SU, if you using magisk switching wifi takes a time,
 
Last edited:

kpratama24

Senior Member
I flashed the rom in TWRP, after that I rebooted, set the basic things until I got to the homescreen. Then I turned off the phone, booted into TWRP and flashed mKernel-LOS-M-R2.zip. Then I rebooted and it just stuck in bootanimation.

Which TWRP version you had installed ? Try the latest one (3.1.1.0) or if you are on the latest one, try the 0506 build. I use that one without flashing extra kernel and everything seems to work just fine

CMIIW
 

mikey000

Senior Member
Dec 6, 2011
284
23
Malang
reflash this rom because its stability, and then lay it on the table for about 3 hours and then my device just reboot by its own, is anybody have the same issue?
 

momo1098r

Member
Oct 24, 2016
34
5
Torino
hey guys,
I try this ROM, but is very bad for me. The LTE signal is very unstable and low. (VODAFONE IT)
The ROM is very slow. More LAG on app (facebook, twitter, whatsapp ecc ecc...) and the charging is very slow, the phone say Slow charging
I dont flash mKernel.
 

dels07

Senior Member
Nov 1, 2012
422
153
Jakarta
hey guys,
I try this ROM, but is very bad for me. The LTE signal is very unstable and low. (VODAFONE IT)
The ROM is very slow. More LAG on app (facebook, twitter, whatsapp ecc ecc...) and the charging is very slow, the phone say Slow charging
I dont flash mKernel.
Consider this rom has been abandoned, you should use LOS 14.1 by jacoghi or RR 5.8.3 by Razziell.
If you still stick with marshmallow, Razziell Mokee 6 by far is better than this rom.
 

golestan

Member
Aug 24, 2017
22
0
Hi, I first tested lineage-13.0-20170326 and did not work fingerprints.
Then I tested lineage-13.0-20170414 . In addition to the fingerprint, there is a weak signal
And the question I had was the latest version, I found many versions on Mega server
 

dels07

Senior Member
Nov 1, 2012
422
153
Jakarta
Hi, I first tested lineage-13.0-20170326 and did not work fingerprints.
Then I tested lineage-13.0-20170414 . In addition to the fingerprint, there is a weak signal
And the question I had was the latest version, I found many versions on Mega server
Mega server was not updated, as OP already abandoned the post.
This is folder contain the latest rom:
https://yadi.sk/d/f70rEb5x3J6VSe

You should also consider Mokee 6 by Razziell if you prefer marshmallow rom.
https://forum.xda-developers.com/showpost.php?p=72791772&postcount=267
https://forum.xda-developers.com/showpost.php?p=72922681&postcount=280
 
Last edited:
  • Like
Reactions: golestan

Kinto

Senior Member
May 7, 2009
286
29
Pesaro
OnePlus 7
i'm using the last LOS 13 version 06/05, since on mokee i strangely cannot bypass securenet with magisk (it is ok with los).

But i have random reboots (luckly only occasionally) and scrolling on emojy panel (in whatsapp) in the keyboard (aosp one, or even fleksy) just close the emoji panel and go to the standard input.

It is VERY hard to find a new emoji since that panel will close as soon as i "swipe up".

Any1 with this problem?
 
  • Like
Reactions: 0lorenzo

Top Liked Posts

  • There are no posts matching your filters.
  • 39
    Lineage OS 13 (2017.04.14) for Redmi 4 Prime UNOFFICIAL
    (codename - markw)


    (Folder with ROMs and Kernels on MEGA)
    >>>Download HERE<<<

    In folder "KERNEL by msdx321" you can find Kernels.
    DO NOT HURRY UP TO FLASH KERNEL mKernel-LOS-M-R1(R2).zip!
    If do the CLEAN install with all WIPES of phone, then install ROM and Kernel mKernel-LOS-M-R1(R2), phone stops booting on animation logo;
    If you flash ROM than give it boot it up, and after that flash Kernel, it will be ok, but after flashing this kernel DONT DO WIPE CACHE/DALVIK!!


    How to install:
    1) Flash TWRP (if you not have it already)
    2) Wipe System, Dalvik ART/Cache, Data, Cache
    3) flash ROM
    4) Download and flash GAPPS (HERE GAPPS, choose ARM64 - 6.0 - recommended Nano or Pico)
    5) Reboot to System

    If you will find some bugs on Stock Camera, just install Snap Camera!(down below)

    If your speaker will be cracking on incoming call, just do next:
    Settings - Notifications - App notifications - Phone - turn OFF Allow peeking.

    If you will have battery drain by location wakelocks, try this(Need ROOT):
    1) Install My Android Tools
    2) Services - System - LocationServices
    3) Turn OFF NetworkLocationService
    No need to reboot!

    All Location functionality will be okay!

    And remember:
    All you do it's on your own risk!


    Thats all, falks!:victory:

    ALL CREDITS AND THANKS TO msdx321, 0meaninsuit0, xiaobai112220, Liberation(on GitHub)!!!
    They make the ROM! THX GUYS FOR YOUR WORK! ;)



    We Got Xiaomi Redmi 4 Prime Kernel Sources!
    :victory:>>>THEY ARE HERE<<<:victory:



    The same thread, but on MIUI Global Forum - HERE

    Sorry for Ukrainian screenshots :p
    25
    It's not that simple mate, look at this: https://wiki.lineageos.org/device_requests.html . We need an approved developer who maintains the device, for example. However, I think we are not that far away from having official lineage os support, @Anik_khan is the official lineage os developer and maintainer of the Redmi 3 (ido), and he is also developing for the Redmi 4 Prime, so in my opinion we could get official support soon.

    Yeah i will do it soon.
    17
    Ok, guys, this is my personal build for both Lineage and TWRP, both are updated, bugfree (from my three-day testing, let me know if you run into any errors) and built using Linaro and UberTC. I'm using msdx321 device sources (thanks for that, my man) with my own kernel (which is still not online, since I'm testing some stuff out), which is simpler and should be more battery friendly. Other than that, video camera doesn't present those weird effects present on original build. TWRP is updated and built from source. I'll keep track of the number of download to see if I should update it or not, so please, no mirrors. I have 14.1 in the oven, but it's still buggy (not even RIL works) and it will take some time to be usable due to necessary kernel changes. ZRAM is enabled and can be used without any problems.

    17
    People, no PMs, please. What can't you understand when I say this? Just calm down for now, please...
    16
    Ok, guys, I might have some good news:
    - Fixed double tap to wake on devices in which it didn't work (so called EBBG, or whatever);
    May have fixed the upside down front camera (I don't have the issue, so not sure about it);
    May have fixed the idling high battery drain when compared to stock Miui;
    May open a new thread, since I'm putting more time into this than originally thought, so people can relax about it;
    - Fixed reboot to recovery from reboot menu;

    Bad news:
    It's kinda hard to adapt the code for two different hardwares, so probably we'll have two different zips, one for people with EBBG, and other for tianma (or whatever the manufacturers of the LCDs are);
    I'll be playing a bit with the Zenfone 3 blobs to see if we can get any improvements in performance, and most likely post an update by Sunday with the fixes;