[2020-01-27] ®FDE.AI - Ultimate Android Optimizer

[FeraVolt]

Your warranty is now void.

I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
backup your data before flashing it!
YOU are choosing to make these modifications, and if
you point the finger at me for messing up your device, I will laugh at you.

Do everything at your own risk!

Intro:​

Hello everybody. My name is Fera. I want to share this project with you for free. I made it myself from scratches once again. Please hit "thanks" button, rate this thread 5-star, or consider donating me to support my work. (Thanks!)

What's in:​

FeraDroid Engine (simply FDE) - an All-in-One ultimate optimizer for all devices on Android OS. No settings/customization and rest 'headache' - all parameters are individual for EVERY device depending on it's hardware/software characteristics. All parameters are very balanced - you may gain performance without increase of power consumption AND reduce power consumption without losing performance. FDE is totally compatible with very wide range of devices and Android versions.

Installation requirements:​

Supported CPU arch's:

• ARMv7 (armeabi-v7a) (32bit)
• ARMv8 (arm64-v8a) (64bit)
• x64bit (x86_64)

Supported Android OS versions:

• 4.1 and higher

Detailed tech description:​

FDE - very universal Android OS optimizer. Very wide-range settings of OS and Linux kernel are configured, still being cross-platform utility, maximally compatible with all devices. This means that it doesn't have any dirty hacks/hardcore and 3rd part binaries (except busybox) & config files. FDE applies configurations depending on It's hardware and software, so that in the end every device is configured individually.
New unique method of execution - all required FDE components are loaded directly to RAM and executed from there. System partitions are remounted RW only once while installation. This means high speed (the worst RAM will have at least ~500MB/s of I/O speed), no power consumption (no NAND memory I/O occurs) and security (system partitions are in read-only state). Also new-gen FDE is synced with OS boot process - so tweaks will be applied in correct time. All system partitions are trimmed and checked for errors after every OS boot with FDE onboard. Universal installer automatically detects what ROOT-method you use and how to auto-start. Finally, FDE is not only about optimization. It's also about security and feature-enabler.

See compacted list of most included features HERE.

Artificial Intelligence:

As you may notice from the name "FDE.AI" - can tell us that it has real AI inside. AI will learn how do you use your device, check out current usage scenario and adapt some system parameters real time to give you best usage experience. Details HERE.

Why to optimize?​

First of all to make you happy with your device, to make it live longer & be snappy. Another reason is garbage. WTF? Yes. There is a world problem of e-garbage utilization, especially electronic devices & their toxic stuff like batteries..etc.. I'm not against progress - I'm against the selling politics of corporations, which add features slowly, to make people buy them. I'd say OKAY if it wasn't harmful, but in fact Africa became a toxic garbage continent - they need somewhere to put retarded e-devices & that's sad. It costs them cheaper to move toxic garbage to another country, rather then properly utilize it. You may say, how FDE can help with that, are you mad bro? Well, I hope that if you install FDE on your device, you'd use it for longer time, because of all optimizations. So that it will make you happy & you won't change it too frequent, in fact possibly reducing the amount of e-garbage. Thanks.

Installation:
WARNING! Don't use any other All-in-One tweakers or things may get much worse! I warned you!​

• Make a backup just in case something goes wrong.
• Download latest version of FDE and install it via custom recovery OR add zip in modules list if you are using Magisk systemless root.
• After OS boot, you will get vibration and a log file /sdcard/Android/fde.txt will be created if FDE worked OK.

If you want to uninstall FDE simply remove module from Magisk Manager if you are on Magisk OR flash this zip in custom recovery.

Download:
FDE.AI-v7.3-20200127

About FDE APK
FAQ
Related Videos
Join my group in Telegram for 24/7 support.
Join my Facebook group.
Thread at 4PDA.
Fan-art​

Thanks to all guys, who contributed, helped, tested my work.. You all are wonderful, amazing, smart, super cool, beautiful people!
Consider donating me to support my project if you like it. Thanks!

XDA:DevDB Information
FDE.AI - Ultimate Android Optimizer, Tool/Utility for all devices (see above for details)

Contributors
FeraVolt
Version Information
Status: Stable
Current Stable Version: v8.0
Created 2019-03-10
Last Updated 2020-01-27

 

[FeraVolt]

FDE.AI FAQ

Will it work on this or that device?

• It will work on any device which runs Android OS.

Will it work along with this or that tweak/optimizer?

• NO. Don't use any other All-in-One tweakers or things may get much worse!

Can I use this on custom kernel?

• Yes, why not? It will work even better on custom kernel.

Does FDE has any configuration/logs?

• No configurations. This is "flash & forget" optimizer. It will configure your system depending on you hardware/software automatically & individually. Log is available in /sdcard/Android/fde.txt

Is it worth to try FDE if I have a powerful flagship?

• Yes, sure. FDE not only gives performance, but also increases power-saving.

Is there any difference between zip from Magisk module repo and zip provided here?

• The difference is only in installer - zip provided here is universal, while one in Magisk repo is for Magisk root only.

I have ROOT, but don't have recovery. Can I do something?

• You may try to install FDE via Flashfire app.

I have ROOT - not Magisk, and not SuperSU, and I don't have init.d support. What to do?

• Try to emulate init.d support with app like Universal_Init.d_Support or similar.

Installation was successful, but no vibration. What does this mean?

• Try to reboot device. Wait for a minute or two more. Maybe it will work, but a little later than expected. Also check for /sdcard/Android/fde.txt file. If still no luck, try to update your ROOT method (Magisk preferred). If you do have log and it says "all good" - then don't worry at all. Some rare devices doesn't support vibrations triggered by script. If still not working, read THIS post.

Do I need busybox?

• No, FDE has a built-in one already. But if you already have one - they will not conflict.

Are project treble ROMs supported?

• YES.

Flashed fine, but can't find icon for FDE. Huh?

• This is not an Android apk and it has no interface yet.

Can I flash FDE right after ROM installation?

• NO. Boot ROM first, then install FDE.

AI says '...turbo' is not supported. What can i do to make it work?

• You may try to install another custom kernel. Those features are kernel dependent.

It's running fine, but i got a problem...

• FDE.AI is under active development. Please attach any useful information such as log/screenshot, name of your device, ROM/recovery version. I am developer of FDE and I will help you to figure out the problem.

 

[Paget96]

Nice mod, please check your git

 

[yyh991013]

Where is the download link???

来自我的 SM-G920F 上的 Tapatalk

 

[FeraVolt]

There is a 'downloads' tab over main post

 

[Black_Eyes]

There is a 'downloads' tab over main post

Error executing update-binary

 

[FeraVolt]

Here is zip with fixed recovery installation. Forgot ';' in script...

 

[russia101]

No log file for me

 

[kioshio]

I test your mod and I dont have any log, and any change in my device; galaxy tab pro 8.4 with SlimLP 5.1.1

 

[FeraVolt]

No log file for me

I test your mod and I dont have any log, and any change in my device; galaxy tab pro 8.4 with SlimLP 5.1.1

Make sure you have mounted system partition in recovery before flashing.. This is beta version..being under development.. Also possibly it simply didn't run on boot. Please specify your device, android version and rom and i will try to check this out. I tested it from 2.3 till 5.1.1 android version..stock roms..

 

[russia101]

Make sure you have mounted system partition in recovery before flashing.. This is beta version..being under development.. Also possibly it simply didn't run on boot. Please specify your device, android version and rom and i will try to check this out. I tested it from 2.3 till 5.1.1 android version..stock roms..

I'm using a s3 LTE and I'm currently on marshmallow 6.0.1

 

[hipocrazy]

No log file. I Followed instructions. Stock Android 4.2.2

Still......noticeable improvement in loading of apps. Any other way to see if it flashed correctly?

 

[ChavitoArg]

Seems installed, let's see if it works. 5.1 OxygenOS. Here is my log: https://drive.google.com/file/d/0B1B_Q2k5VDqYUml1bTBJd2ZFMk0/view?usp=docslist_api

You should provide an Uninstaller, just in case. Cheers

Enviado desde mi ONE E1005 mediante Tapatalk

 

[FeraVolt]

Seems installed, let's see if it works. 5.1 OxygenOS. Here is my log: https://drive.google.com/file/d/0B1B_Q2k5VDqYUml1bTBJd2ZFMk0/view?usp=docslist_api

You should provide an Uninstaller, just in case. Cheers

Enviado desde mi ONE E1005 mediante Tapatalk

Yes..it's working on your device fine. Do you notice any improvement? In case of high-end devices, most noticable should be a battery consumption decrease.
Will provide uninstaller asap.

 

[FeraVolt]

No log file. I Followed instructions. Stock Android 4.2.2

Still......noticeable improvement in loading of apps. Any other way to see if it flashed correctly?

Yes..via terminal emulator type:
su
sh /system/engine/as.sh
sh /system/engine/feradroid.sh

Then recheck log file..

 

[FeraVolt]

FeraDroid-Engine-v0.19-beta2

FeraDroid-Engine-v0.19-beta2

Changes captured:
https://github.com/feravolt/FeraDroid-Engine/commits/master

 

[FeraVolt]

Manuall FDE run

Here is a little instruction in case you couldn't install FDE on your device. Recovery doesn't install it well..or..FDE doen't autostart or you just don't have a recovery for your device (as in my case with china noname phone).

So:
-> Download latest FDE zip and extract it.
-> With any root explorer copy engine folder to /system/
-> Set 777 (check all tabs) permissions to whole engine folder and what is in there and in every folder content
-> Then get 'Terminal Emulator' app from Google Play store, run it and type:

su

-> Grant root permission then type:

sh /engine/as.sh

-> After that reboot your device and in 2 minutes, check log file on path: /sdcard/Android/FDE.txt
-> If there is no FDE.txt log then open Terminal Emulator again and type:

su
sh /system/engine/feradroid.sh

-> Wait it's completion, then check log file again. If it exists, please send it to me to deal with autostart issue for your device. You should run theese two commands every time you reboot your device..

Hope this will help you and you will be happy to see your device runnign fast. :fingers-crossed:

 

[russia101]

Log file

FeraDroid-Engine-v0.19-beta2

My log file looks not like it's working correctly and this logfile only appears after I typed the command which you posted for terminal
View attachment FDE.txt

 

[FeraVolt]

init.d start

FeraDroid-Engine-v0.19-beta2

My log file looks not like it's working correctly and this logfile only appears after I typed the command which you posted for terminal
View attachment 3598637

Thanks for feedback.It worked for you untill you reboot.

Here..try this zip with a try to be started at boot by init.d.. mount system partition..flash .zip and check log.(remove it beforeflashing this)

 

[russia101]

Thanks for feedback.It worked for you untill you reboot.

Here..try this zip with a try to be started at boot by init.d.. mount system partition..flash .zip and check log.(remove it beforeflashing this)

Ok did what you said and it looks Like everything works

View attachment FDE.txt