[23.04.22] [OneUI 2.5] N960F_DS_N I Dr.Ketan ROM I SecureFolder I SPay (Gear) I Dex

Search This thread
Oct 24, 2015
34
3
Happened to me as well.
What i did is format data, flash via twrp 3.3.1.0, wipe dalvik cache,.

The samsung text appeared for more than 3 minutes than i force start by pressing volume down + power.

It still restarted sometimes when I'm off my phone for a while and directly used it to watch streaming,using camera, etc.

But i can deal with that for now.

Thank you. I have twrp 3.4.0.0. Is the problem caused by it? I need to install twrp 3.31.0?
 

Timtown

Senior Member
Feb 27, 2007
672
332
Wake Forest, NC
Happened to me as well.
What i did is format data, flash via twrp 3.3.1.0, wipe dalvik cache,.

The samsung text appeared for more than 3 minutes than i force start by pressing volume down + power.

It still restarted sometimes when I'm off my phone for a while and directly used it to watch streaming,using camera, etc.

But i can deal with that for now.
You need to reflash ROM. Wipe everything. Factory reset. Advanced (everything but MicroSD) and then format data.
Reflash ROM and, this time let the install complete, it will take 8-12 minutes. You'll know it's finishing when you see "Installing Android Apps". Don't interrupt this process.

Thank you. I have twrp 3.4.0.0. Is the problem caused by it? I need to install twrp 3.31.0?
You should update TWRP. Your bootloop is being because your bootloader and/or modem are not compatible with Q12. Were I you, I'd download Q13 and the BL/CP zip. That ensures everything is compatible.
Flash TWRP with Odin and reboot into recovery and from there into Download mode. Flash BL and CP with Odin. Reboot to recovery. Wipe everything and format data. Reflash ROM. Allow the install to complete.

Sorry, Not so sure about that, since i was off for so long in customize rom flash for a while. But i read it in difference thread and it works for me.
The latest version of TWRP for crownlte is 3.5.0_9-0. Flash with Odin.
 
Last edited:
Oct 24, 2015
34
3
You need to reflash ROM. Wipe everything. Factory reset. Advanced (everything but MicroSD) and then format data.
Reflash ROM and, this time let the install complete, it will take 8-12 minutes. You'll know it's finishing when you see "Installing Android Apps". Don't interrupt this process.

You should update TWRP. Your bootloop is being because your bootloader and/or modem are not compatible with Q12. Were I you, I'd download Q13 and the BL/CP zip. That ensures everything is compatible.
Flash TWRP with Odin and reboot into recovery and from there into Download mode. Flash BL and CP with Odin. Reboot to recovery. Wipe everything and format data. Reflash ROM. Allow the install to complete.

The latest version of TWRP for crownlte is 3.5.0_9-0. Flash with Odin.

Thank you so much. As you said, I installed the last 4 piece rum. Then I downloaded and installed the latest version of TWRP. Everything worked smoothly.
 

DarrenNewsgroup

Senior Member
Apr 9, 2011
355
143
Samsung Galaxy Note 20 Ultra
You say flash the ROM and wait 8-12 minutes. After I flash the ROM I get the Google setup asking me to connect to WiFi and enter my Google account. Am I supposed to wait 8-12 minutes before doing this, i.e. tap nothing on screen for 8-12 minutes after rebooting , then go through the Google setup process?

I am on Q12 at the moment but would like to go to Q13. I think I messed up Q11 to Q12 last time and want to get it right this time.

Thanks
Darren
 

xfakexbloodx

Senior Member
Oct 21, 2010
60
2
You say flash the ROM and wait 8-12 minutes. After I flash the ROM I get the Google setup asking me to connect to WiFi and enter my Google account. Am I supposed to wait 8-12 minutes before doing this, i.e. tap nothing on screen for 8-12 minutes after rebooting , then go through the Google setup process?

I am on Q12 at the moment but would like to go to Q13. I think I messed up Q11 to Q12 last time and want to get it right this time.

Thanks
Darren

I think he meant for first boot up (from Samsung logo until boot to system)

You could directly setup your google.
 

ISLF

Member
Feb 13, 2013
38
1
Hi..
I tried installing the safetynet 1.1.1 in recovery.. But got error 123, not able to extract the zip file... Should I extract first?
 

jult

Senior Member
Apr 22, 2011
478
143
Amsterdam, NL, EU
jult.net
Such a good concept Ketan, but the language in your installer is so confusing and often even plain incorrect English, making it a hard one to install for English speaking users. You should really ask a translator for your next ROM to go through the aroma code.
I did it once, but you responded so angry to me that I'm not going to even bother anymore.
 

gicu2006

Member
Nov 7, 2010
23
0
I have some purchased programs that no longer work on Q13. Can you tell me what to do?
 
Last edited:

Detonatte

Senior Member
Jul 5, 2011
598
159
România
I find it very difficult to connect to the wireless router. He tells me the password is wrong. I try 4-5 times in a row and it's hard to connect. With a Huawei it connects instantly to the same router. What is the problem??
 

hoalaxanh123

Member
Aug 19, 2017
47
4
Da Lat,Lam Dong,VietNam
Such a good concept Ketan, but the language in your installer is so confusing and often even plain incorrect English, making it a hard one to install for English speaking users. You should really ask a translator for your next ROM to go through the aroma code.
I did it once, but you responded so angry to me that I'm not going to even bother anymore.
Oh, remember, this a FREE rom :))
 

Top Liked Posts

  • There are no posts matching your filters.
  • 123
    N960F/FD Dr.Ketan ROM DeKnoxed




    ROM features


    Features may vary depend on ROM version. Read changelog post for latest update and features of current version.

    Credit and Thanks :
    @Chainfire - Respected elite developer for supersu and his unbelievable contribution to XDA/Android community. @wanam - Respected elite developer for his awesome contribution and references to his works.
    @topjohnwu for Magisk
    @xperiacle the amazing developer for reference to his work and tools. @gharrington for 3minit battery and QuickLaunch.
    ROM Control source and all credit and thanks goes to @daxgirl and @Wuby986 for their open source project for RomControl.
    @Tkkg1994 for his permissive kernel @AbrahamGC for some ideas @frap129 for Spectrum app. samsungvn htcmania & 4PDA for tips and some stock apks. khongloi113 for secure folder guide kdrag0n for SafetyNet fix







    XDA:DevDB Information
    Dr.Ketan ROM, ROM for the Samsung Galaxy Note 9

    Contributors
    dr.ketan
    ROM OS Version: 9.x Pie
    ROM Kernel: Stock (pre-rooted). Source code (samsung) here

    Version Information
    Status: Testing

    Created 2018-08-26
    Last Updated 2020-08-15
    64
    Installation and Download


    Important :


    - This will void warranty.
    - As of now you will lose Samsung Pay and Secure folder forever if you root once, even unrooting won't help. (hope in future we can get it working on tripped knox device)
    - OTA likely won't work once you root device.


    Installation :

    If you are on stock ROM/Recovery, follow below said steps

    1.Enable Developer Option (settings - about phone - Software information - Tap 7 times on build number to activate developer option in settings menu)
    2.Enable OEM Unlock from developer option (If you don't have this option then read this you can't flash ROM before this option available.)
    3.Download and copy ROM File to Ext SD card, Use ES file/Root explorer or any similar to check MD5, it should be match with provided in download section.
    4.Download TWRP
    5.Switch Off device
    6.Press Vol down + Bixby and then connect device to PC to reboot to download mode, press volume up when asked to continue to download mode
    7.Download Odin and open it, Disable 'Auto reboot' from option menu of Odin
    8.Select TWRP (tar image) with AP tab of Odin and Start
    9.Once Successfully flashed, you will see 'Passed' in Odin tab
    10.Disconnect device and hold Vol down + power till screen goes off, Now immediately press Vol Up + Bixby + Power to reboot to TWRP
    11.Select to allow modification
    12.From TWRP, Select WIPE menu - Then FORMAT DATA - You need to type 'yes' to perform wipe. WARNING : This will erase all data including Int SD storage from device
    13.Once format device completes, go back and select REBOOT' Menu and then - 'RECOVERY', This will reboot to TWRP again
    14.Now select Install and navigate path to Ext SD card - ROM zip file, you have copied earlier
    15.Read installation instruction of ChangeLog post for vendor.img It may be available inside ROM zip or may need to flash separately, depending on version of ROM
    15.Let device boot, and read ROM specific Instructions below.


    If you are on CWM recovery and custom ROM already, Follow below said steps.


    1.Download ROM zip and place on Int Storage/Ext SD and check MD5
    2.Reboot to recovery and select factory reset and flash ROM zip you have copied in step 1.
    3.Let device boot,Read ROM specific instructions below.

    Some ROM specific instructions

    1. On boot, you will see a notification about don't use any app that requires root, wait till that notification to disappear. This issue explained in MustRead.txt file in download area. Also after first boot, wait for ROM Tool to open, it will provide option for some important fix.

    2. ROM doesn't have any CSC included as now csc have separate partition (ODM). ROM will not erase/flash/modify files inside odm partition it and you will have your existing CSC even after flashing a ROM

    3.Vendor partition may be included in ROM or available separately (Read changelog of version you are installing) .It is recommended to flash it specifically you are on different base.

    4.Since Pie version, OEM is pre-fixed with kernel patch and after flashing ROM, you may find OEM option in developer settings but it will be disable, it is actually because of hack/fix applied. In real case if it is disabled then you may not able to boot rom with TWRP. Simply ignore it.

    Read ChangeLog of ROM you are going to flash for any specific instructions. Link to changelog is available in next post below.

    Can I dirty flash (without factory reset) ROM? No, We don't recommend it. If you are able to handle consequences with dirty flash then proceed, but don't post bugs in forum without clean installing ROM.
    PS : Who can handle consequences of dirty flashing, they never need to ask this question in forum. ;)


    For Encryption - Read This


    Download : https://drketanrom.com/



    Instructions provided above are for latest version of ROM only, on previous versions of ROM it may or may not be same, we recommend to flash latest ROM only.

    How to report bugs/Issue?
    To report issue, you needs to provide following informations, else it will be ignored. Also if your query is already mentioned on OP/ChangeLogg post, it will be ignored.
    1.ROM build number.
    2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
    3.Bug/Issue appears right after installing or later?
    4.How to reproduce error.
    5.Is there any same reports there on thread on your searching?
    6.Is there any mention about same bug on OP or changeLog post?
    7.Logs - Attach logs here/Upload to other places where it can be downloaded without registration and doesn't have ad (we recommend dropbox/Gdrive) and post link.










    52
    ChangeLog

    Oreo
    - O1 - 26.08.2018 - Initial release
    - O1_New - 26.08.2018 - Vendor no more flashing from Aroma. Read above Installation guide for Vendor flashing with Odin.
    - O2 - 28.08.2018
    - O3 - 09.09.2018
    - O4 - 30.09.2018
    - O5 - 12.10.2018
    - O6 - 12.10.2018
    - O7 - 11.11.2018
    - O8 - 25.11.2018

    Pie Beta
    - P01 - 05.12.2018
    - P02 - 15.12.2018
    - P03 - 30.01.2018
    - P04 - 01.01.2019

    Pie Official
    - P05 - 14.01.2019
    - P06 - 22.02.2019
    - P07 - 01.03.2019
    - P08 - 10.03.2019
    - P09 - 14.03.2019
    - P10 - 20.04.2019
    - P11 - 18.05.2019
    - P12 - 09.07.2019
    - P13 - 26.07.2019
    - P14 - 24.09.2019
    - P15 - 08.11.2019

    Android 10 (Beta)
    - Q01 - 23.11.2019
    - Q02 - 28.11.2019

    Android 10 (Stable)
    - Q03 - 05.01.2020
    - Q04 - 05.02.2020
    - Q05 - 16.05.2020

    OneUI 2.1

    - Q06 - 11.06.2020
    - Q07 - 11.07.2020
    - Q08 - 15.08.2020
    - Q09 - 16.09.2020

    OneUi 2.5

    - Q10 - 17.10.2020
    - Q11 - 14.11.2020

    - Q12 - 12.12.2020
    - Q13 - 12.01.2021
    - Q14 - 21.02.2021
    - Q15 - 03.04.2021
    - Q16 - 30.05.2021
    - Q17 - 27.07.2021
    - Q18 - 25.11.2021
    - Q19 - 23.04.2022


    How to report bugs/Issue?
    To report issue, you needs to provide following informations, else it will be ignored
    1.ROM build number.
    2.Dirty/Clean Install. - If you have dirty installed, Then first clean install and report if issue persists.
    3.Bug/Issue appears right after installing or later?
    4.How to reproduce error.
    5.Is there any same reports there on thread on your searching?
    6.Is there any mention about same bug on OP or changeLog post?
    7.Logs
    48
    Hello guys
    It's been first time I couldn't visit xda for about a week since last few years. I have planned update last week but couldn't. As we know life have some priorities, and xda is not on top so hope you can understand. Trying my best to come back but yet unable to give date. May this disappointing for some but hopefully you will try to understand.
    Thanks in advance for understanding and keeping patience.
    Again sorry for delay.
    Regards
    Dr.Ketan
    34
    Dear friends,
    When whole world is fighting against corona, being a doctor, my service is more important to my society and my country as doctor, till our fight end, I am taking leave from android development.
    Wishing you and all a healthy life.
    Take care,
    Regards
    Dr.Ketan.