[23 Nov 12] cLK

Search This thread

Robbie P

Senior Member
Feb 8, 2011
5,115
4,014
London
No 97ppp. I have working rmnet on clk


Sent from my HTC HD2 using XDA Premium 4 mobile app

It might not be called 97ppp exactly, but if you have ppp folder, that is a flag file for ppp, so you almost certainly have ppp.
I just found another way to check from android, phone *#*#4636#*#* and see if it says ppp0 or rmnet0
 

lolerpro8

Senior Member
Jan 14, 2013
546
187
It might not be called 97ppp exactly, but if you have ppp folder, that is a flag file for ppp, so you almost certainly have ppp.
I just found another way to check from android, phone *#*#4636#*#* and see if it says ppp0 or rmnet0

No ppp folder, PPP in default.prop, or any init file associated by PPP. Checked installer log, and it says "rmnet installed". I am on clk and I am on rmnet... Even this is sent w/ using rmnet so yeah... Maybe something in clk changed to support it w/o anybody noticing it...

Sent from my HTC HD2 using XDA Premium 4 mobile app
 

gilbert32

Senior Member
Apr 4, 2011
1,037
1,436
In the universe
No ppp folder, PPP in default.prop, or any init file associated by PPP. Checked installer log, and it says "rmnet installed". I am on clk and I am on rmnet... Even this is sent w/ using rmnet so yeah... Maybe something in clk changed to support it w/o anybody noticing it...

Sent from my HTC HD2 using XDA Premium 4 mobile app

weird :silly:
 

Robbie P

Senior Member
Feb 8, 2011
5,115
4,014
London
i just tried and it wouldnt even install rmnet.....during install it says cannot set rmnet for clk set ppp as default...

which clk number are you using

This is odd:confused: are you using chautien cm11? i can't see where in aroma config or updater script where that check is performed.
The aroma config for chautien is
Code:
 #-- Group 1
    "Default Connection Type","",2,
      "RMNET Connection",
        "Please Choose RMNET for MAGLDR bootloader.",	iif((file_getprop("/tmp/nfo.prop", "bootloader") == "MAGLDR"), 1, 0),
      "PPP Connection",
        "All bootloaders support PPP.",           	iif((file_getprop("/tmp/nfo.prop", "bootloader") == "MAGLDR"), 0, 1),
The updater script for chautien is
Code:
########################
# Connection Selection #
########################
set_progress(0.65);
if file_getprop("/tmp/aroma/mods.prop", "selected.1") == "1" then
    delete("/system/ppp");
    delete("/system/default.prop");
    delete("/system/etc/init.d/97ppp");
    ui_print("@  RMNET installed.");
endif;

if file_getprop("/tmp/aroma/mods.prop", "selected.1") == "2" then

  package_extract_dir("mods/clk-ppp-patch", "/system");
  ui_print("@  PPP installed.");

endif;
If rmnet is selected (1) then it deletes ppp files which are not in /system in the first place
if ppp is selected (2) it installs all the ppp files

Anyway, i am using cLK 1.5.2.1, and installed chautien using xylo's edited 4ext nand recovery. I chose rmnet install and it installed rmnet (as lolerpro8 said). I get the H and G symbols but can't actually connect using browser or play store:confused:

BTW, i did *#*#4636#*#* using "rmnet" and saw no difference to the output than with ppp on tytung's rom, but no rmnet0 or ppp0 was apparent, so not really a definitive test:eek:

lolerpro8, can you post a logcat
 

lolerpro8

Senior Member
Jan 14, 2013
546
187
This is odd:confused: are you using chautien cm11? i can't see where in aroma config or updater script where that check is performed.
The aroma config for chautien is
Code:
 #-- Group 1
    "Default Connection Type","",2,
      "RMNET Connection",
        "Please Choose RMNET for MAGLDR bootloader.",iif((file_getprop("/tmp/nfo.prop", "bootloader") == "MAGLDR"), 1, 0),
      "PPP Connection",
        "All bootloaders support PPP.",           iif((file_getprop("/tmp/nfo.prop", "bootloader") == "MAGLDR"), 0, 1),
The updater script for chautien is
Code:
########################
# Connection Selection #
########################
set_progress(0.65);
if file_getprop("/tmp/aroma/mods.prop", "selected.1") == "1" then
    delete("/system/ppp");
    delete("/system/default.prop");
    delete("/system/etc/init.d/97ppp");
    ui_print("@  RMNET installed.");
endif;

if file_getprop("/tmp/aroma/mods.prop", "selected.1") == "2" then

  package_extract_dir("mods/clk-ppp-patch", "/system");
  ui_print("@  PPP installed.");

endif;
If rmnet is selected (1) then it deletes ppp files which are not in /system in the first place
if ppp is selected (2) it installs all the ppp files

Anyway, i am using cLK 1.5.2.1, and installed chautien using xylo's edited 4ext nand recovery. I chose rmnet install and it installed rmnet (as lolerpro8 said). I get the H and G symbols but can't actually connect using browser or play store:confused:

BTW, i did *#*#4636#*#* using "rmnet" and saw no difference to the output than with ppp on tytung's rom, but no rmnet0 or ppp0 was apparent, so not really a definitive test:eek:

lolerpro8, can you post a logcat

Nope, I can't.. Due to school my parents took away my laptop I bought a month ago... So I won't be able get any logs until my school finishes...

Sent from my HTC HD2 using XDA Premium 4 mobile app
 

Robbie P

Senior Member
Feb 8, 2011
5,115
4,014
London
Nope, I can't.. Due to school my parents took away my laptop I bought a month ago... So I won't be able get any logs until my school finishes...

Sent from my HTC HD2 using XDA Premium 4 mobile app
Parents eh;)
try terminal app,
su
logcat > /sdcard/logcat.txt
dmesg > /sdcard/dmesg.txt
then post it as attachment
i can post mine if necessary, but data still does not seem to be working for me.
 

lolerpro8

Senior Member
Jan 14, 2013
546
187
Parents eh;)
try terminal app,
su
logcat > /sdcard/logcat.txt
dmesg > /sdcard/dmesg.txt
then post it as attachment
i can post mine if necessary, but data still does not seem to be working for me.

I'll do it tomorrow. But it is odd that I'm the only one having rmnet work on clk...
And yea parents.. For me really there is no difference if I have a home computer or not, I can still spend my non learning time on other stuff...

Sent from my HTC HD2 using XDA Premium 4 mobile app
 
Last edited:

kokotas

Senior Member
Oct 23, 2007
714
1,570
Athens
it is odd that I'm the only one having rmnet work on clk...
Hi lolerpro8,
When you say rmnet work on clk, what exactly do you mean?
Ok, let me first explain a bit, maybe it will clarify things:
- All the modem functions are handled by rild that is basically a simple daemon that will get all android api calls and route them to a hardware manufacturer library. This library is in fact doing all the work.
- It basically translate google API into modem commands and handles call establishement, call status, signal, ...
- With native android phones, htc, motorola (...) provide a library that does the job, and as HTC HD2 hardware is close to HTC desire or HTC desire HD, desire HD binary library is working quite well for our hd2 as it is.
- But for network, android phones are usually using rmnet interfaces implemented in radio (=modem). Unfortunately as hd2 has wince roots, native network way is ppp, not rmnet, and rmnet implementation in hd2 radio is buggy as hell.
- This is why we developed a wrapper: it put itself between rild and htc native ril, routes most function calls to htc ril but handles network function calls to establish ppp instead of rmnet.

So, basically, wrapper is hack to keep using HTC binaries while doing ppp.
The logs Robbie P's suggested, would clear things up.

Regards!
 
  • Like
Reactions: clyder

bad.bid

Senior Member
Mar 15, 2011
77
9
Itahari
You will have to find some boot loader dev for that. The problem is some BL devs like rick_1995 and cotulla are out of business...

Sent from my HTC HD2 using XDA Premium 4 mobile app

why bother devs with teeny weeny projects like this??

i created .bat files in my adb and fastboot folder with those commands, created shortcuts to them and placed them in desktop in a folder.
works well for the purpose :)

thanks for the reply
 

Rick_1995

Inactive Recognized Developer
Sep 3, 2009
1,118
3,016
Santa Clara
You will have to find some boot loader dev for that. The problem is some BL devs like rick_1995 and cotulla are out of business...

Sent from my HTC HD2 using XDA Premium 4 mobile app

out of business is a rude thing to say :p

It's just that my HD2's screen is screwed up, I can see the backlight come up and even control android when it boots but the display is blank. What confuses me is that I've never opened it up, I did put it in my baggage during a long haul flight though.
 

aazzam16661

Senior Member
Aug 22, 2012
442
593
21
Gombak, Selangor
out of business is a rude thing to say :p

It's just that my HD2's screen is screwed up, I can see the backlight come up and even control android when it boots but the display is blank. What confuses me is that I've never opened it up, I did put it in my baggage during a long haul flight though.

Maybe the high temps in the baggage area in the plane (Cargo) cause the screen to burnt out :confused: :confused:
 

gilbert32

Senior Member
Apr 4, 2011
1,037
1,436
In the universe
out of business is a rude thing to say :p

It's just that my HD2's screen is screwed up, I can see the backlight come up and even control android when it boots but the display is blank. What confuses me is that I've never opened it up, I did put it in my baggage during a long haul flight though.

could be the pressure that screwed it up? There should be some mobile phone repair stores (preferably ones that are expert with htc phones) that can fix it or change the display, for 50~100$

Another solution is ebay + HD2 general section for instructions ;)
 

hitman1376

Senior Member
Jan 7, 2013
667
430
23
zanjan
Welcome back ...

out of business is a rude thing to say :p

It's just that my HD2's screen is screwed up, I can see the backlight come up and even control android when it boots but the display is blank. What confuses me is that I've never opened it up, I did put it in my baggage during a long haul flight though.
Welcome back Dear Rick_1995 ... We really missed you in HD2 Threads ... How is the development going ? ... Once I opened my HD2 .. If you would Like , I would be glad to give you this ( also this ) ... Its the Best Instruction ... Good luck ...


With Best Wishes
Hitman1376​
 
  • Like
Reactions: arvter

jja2000

Senior Member
Dec 14, 2014
91
10
Hi

I've been trying to get android (tytung's cm10.1 to be exact) to work on my hd2, but I keep getting stuck somewhere.

With Magldr (and DataOnEXT) it sort of factory resets every time I reboot and now with clk it says
Code:
sending 'recovery' (6916 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 5.099s
while trying to flash an updated version of twrp.

If I use extended twrp 2.5.0.5 included in the latest download I get "unable to mount storage" when trying to flash anything so that doesn't work either :/

Any help on the Clk side of things?
 

ya5

Member
Jun 10, 2010
48
49
Gorzów Wielkopolski
Hi

I've been trying to get android (tytung's cm10.1 to be exact) to work on my hd2, but I keep getting stuck somewhere.

With Magldr (and DataOnEXT) it sort of factory resets every time I reboot and now with clk it says
Code:
sending 'recovery' (6916 KB)...
FAILED (data transfer failure (Unknown error))
finished. total time: 5.099s
while trying to flash an updated version of twrp.

If I use extended twrp 2.5.0.5 included in the latest download I get "unable to mount storage" when trying to flash anything so that doesn't work either :/

Any help on the Clk side of things?

just check your fastboot drivers, i had ths issue before. And its totaly on the driver side. When got the proper one the problem gone.
 
  • Like
Reactions: Rick_1995

Top Liked Posts

  • There are no posts matching your filters.
  • 67
    Timeline for experimental builds [Latest version: 1.5.2.1 @ 6/May/2013]

    ALWAYS make a backup before installing any of these test versions and try them at your own risk!

    • Installation:
    • Links:
      1. Compiled binary
      2. Source code
    • Related Projects (WIP):
    • Timeline:
      1. 19/Jan/2012 - FIRST alternative suggestion
        Link
      2. 25/Jan/2012 - UPDATE #1
        Link
      3. 26/Jan/2012 - UPDATE #2
        1. New format option leaves recovery partition untouched. So yeah, no pc needed after formatting !:)
          Basically it erases all the other existing partitions one by one. At the end recovery partition is intact so we can enter recovery interface and flash our preferred rom.
        2. Set userdata as 'auto-size' partition . So default partition table is:
          "recovery:5"
          "misc:1"
          "boot:5"
          "userdata:0"
          "system:150"
          "cache:5"
        3. Revised the 'Enable/Disable ExtROM' option.
          If enabled it will automatically be used for 'cache' partition .
          If disabled 'cache' will automatically return to 5MB size .
      4. 28/Jan/2012 - UPDATE #3
        1. Cleaned some code that was not used .
        2. Added option to convert 'auto-size' partition to 'fixed-size' .
        3. Added option to set a partition as 'auto-size' if one doesn't already exist (just decrease its size to zero).
        4. Small fixes to some features I previously added.
      5. 29/Jan/2012 - UPDATE #4
        1. Revised the 'rearrange partitions' menu.
          We cannot move recovery , cause then we'll have to re-flash it via pc .
          How it works:
          Lets say we have this layout:
          1."recovery"
          2."misc"
          3."boot"
          4."userdata"
          5."system"
          6."cache"
          And we want to change it to:
          1."recovery"
          2."misc"
          3."boot"
          4."cache"
          5."system"
          6."userdata"
          1. Enter 'REARRANGE PARTITIONS'
          2. Select 'userdata' -> Scroll DOWN to 6 -> Select it
            (You should see the change in the order of the partitions immediately! Don't worry nothing is committed. If you exit and re-enter SETTINGS menu everything will be reset.)
          3. Select 'COMMIT CHANGES' -> Select 'APPLY'
          (Of course you still have the option to re-order and re-size the partitions via pc, if the default layout doesn't fit your needs)
          WARNING ! If you change the order of the partitions then have in mind that the same /dev/block/mtdblock<n>, n=0,1,2,... point to different mount points.
        2. Clean up some code
      6. 01/Feb/2012 - UPDATE #5
        1. Added new info when booting
          After the partition table you should see a list with the existing bad blocks IF ANY. (CONFIRMED)
        2. IF there are any bad blocks inside recovery,misc,boot,sboot,cache THEN they will be auto-re-sized by adding 1MB to each one.
        3. Changed some output messages
      7. 02/Feb/2012 - UPDATE #6
        1. Changed the function regarding auto-resizing:
          IF there are any bad blocks inside recovery,misc,boot,sboot,cache THEN 1MB per 1bad block will be added to each partition with bad block(s). (CONFIRMED)
        2. Changed some output messages
        3. Default partition table is:
          "recovery:5"
          "misc:1"
          "boot:5"
          "system:150"
          "userdata:0"
          "cache:5"
      8. 06/Feb/2012 - UPDATE #7
        1. Minor fixes/changes
        2. Changed some output messages
      9. 08/Feb/2012 - UPDATE #8
        1. If you press&hold the middle [MENU] button during (re)booting you can immediately boot android from sdcard(emmc), assuming that you have flashed sboot partition with the appropriate image and you have the required folder in the root of your sdcard.
          Process of having dual boot(without using pc):
          Prerequisite: The folder(usually named 'Android' or 'ics') with the SD version of Android exists in the root of your sdcard
          1. Boot the device in cLK pressing [BACK] button, having the sdcard inserted
          2. Go to MAIN MENU/SETTINGS - Select ADD sBOOT
          3. Select BOOT RECOVERY from MAIN MENU
          4. Select 'install zip from sdcard' and use something like this(this is an example) flash_sboot.zip
          5. Select 'reboot system now' and press&hold [MENU] button to directly boot Android (emmc)
        2. After each change(resize/rearrange parts, add/remove sboot, enable/disable ExtROM) is committed there is no longer the need to reboot. clk will just auto return to main menu, and from there you can select your next action.
      10. 14/Feb/2012 - UPDATE #9
        1. Changed cpu speed to 998MHz.
        2. Added option to show/hide info(ptable and bbtable) at start-up under MAIN MENU/INFO.
        3. If you invert screen colors, the change will remain after rebooting.
        4. The speed of reading/writing or erasing is improved a bit.
        5. Cleaned up some code.
      11. 22/Feb/2012 - UPDATE #10
        1. Removed showing bad block info during startup. Bad blocks can be checked from SETTINGS/PRINT BAD BLOCK TABLE(if any bad blocks exist).
        2. Added chipset info in header.
        3. Cleaned up more unused code.
      12. 13/Apr/2012 - UPDATE #11
        1. Ported Rick's latest commit.
        2. Added ability to triple boot. It works like secondary boot 'sboot'; you can add a tertiary boot partition named 'tboot' and the rest work the same.
        3. Added "USB" mark for usb detection; if your device is connected to the pc via usb you should see 'USB' at the bottom of the screen.
        4. Cleaned up more unused code. (EXPERIMENTAL)
      13. 06/Jun/2012 - UPDATE #12
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Added CID, IMEI , BT Mac Addr and WiFi Mac Addr under Device Info (Getting WiFi Mac doesn't work correctly:( ).
        2. Revised the 'Enable/Disable ExtROM' option.
          If enabled, a partition named "null" (which will be only 1 block in size) will be created after 'userdata' and the rest 191 blocks will automatically be used for 'cache' partition .
          If disabled, 'cache' will automatically return to 5MB size .
        3. Added ability to resize partitions by giving size in blocks too . NOT TESTED
          Code:
          fastboot oem part-resize name:size:b
          where size is in blocks
          i.e. fastboot oem part-resize misc:9:b => will resize 'misc' part to 9 blocks
        4. Added ability to add partitions by giving size in blocks too . NOT TESTED
          Code:
          fastboot oem part-add name:size:b
          where size is in blocks
          i.e. fastboot oem part-add misc:8:b => will add 'misc' part with size 8 blocks (= 1MB)
        5. Added option to enable/disable usb detection ("USB" mark at the bottom of the screen if device connected to pc) .
        6. Changed version to LK_1.5black to avoid confusion regarding latest version of main cLK.
      14. 21/Jun/2012 - UPDATE #13
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. cLK can now be updated through fastboot* using a 'proper' image file**
          *:In order to update use :
          Code:
          fastboot flash lk lk.img
          **:In order to create the lk.img, use nbgen :
          Code:
          nbgen -b:lk.bin -o:lk.img
          -Note that the partition table will not be overwitten.
          -Also you can update clk from recovery or from android.
        2. Bug fixes
      15. 20/Jul/2012 - UPDATE #14
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Added option to reset ANY settings you have modified.
          (RESET SETTINGS under SETTINGS MENU = 'fastboot oem reset' ,previously cmd was 'fastboot oem format_vptable')
        2. Fixed errors caused by some partition changes, so it should be stable now!
      16. 26/Jul/2012 - UPDATE #15
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Ported some commits from LK mainline.
          (https://github.com/travisg/lk/commit/a95146ec5aef73b49e37045f96a26c10431d37d4,
          https://github.com/travisg/lk/commit/6f28039866ddeb272e8660dd89a34208fc988896,
          https://github.com/travisg/lk/commit/fc20e231dbabecb612343aa6784705086844052f,
          https://github.com/travisg/lk/commit/ac8b88eefe9067fb0881e15435dce1bbc797d71b,
          https://github.com/travisg/lk/commit/836375f779308d868515d43fbd7979f07874b6de,
          https://github.com/travisg/lk/commit/c2a298970d74dca7c7d738b5e7e3ec04bee00984,
          https://github.com/travisg/lk/commit/c32135b7e5972ec77f0883f55dd8b866b3c07c0d,
          https://github.com/travisg/lk/commit/18559782b3335682310fdfd77b4ccb1563982d2a,
          https://github.com/travisg/lk/commit/06d781f162ff3b35f806de59d7f0bf5bf87fdabd,
          https://github.com/travisg/lk/commit/4bea031527e6d0153e61b7ffd4696df8a30f006c)
        2. 2nd attempt at fixing errors caused by some partition changes.
        3. Edited nbgen so that it is possible to add recovery as a second partition.
      17. 11/Sep/2012 - UPDATE #16
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Added option to set the default boot partition. At start default is 'boot', but you can change it.
        2. Added option to show or not a MULTIBOOT MENU at startup. Default behavior is to be hidden.
        3. The MULTIBOOT MENU will show any existing boot partitions
          and will boot from the default selection in 10s if you don't select something else.
        4. Code:
          supported_boot_partitions[] =
          {
          	{"boot",},
          	{"sboot"},
          	{"tboot"},
          	{"vboot"}, //no uboot :D
          	{"wboot"},
          	{"xboot"},
          	{"yboot"},
          	{"zboot"},
          	{""},
          };
          As you see we have the primary boot + 7 extra boot partitions.
          However there is NO change to the MAX_NUM_PART (max number of the partitions) which is 12, so you can eventually add 5 (of the 7 extra) different boot partitions,
          (unless you don't have a NAND installation and you have deleted 'system' and 'userdata' so you can use all 7 extra, but I think it will be a mess :p).
        5. Added ability to control menu navigation through fastboot:
          Code:
          'fastboot oem key 8' ==> KEY_VOLUMEUP
          'fastboot oem key 2' ==> KEY_VOLUMEDOWN
          'fastboot oem key 5' ==> KEY_SEND
          'fastboot oem key 0' ==> KEY_BACK
        6. Removed option to enable/disable usb detection ("USB" mark at the bottom of the screen if device connected to pc) . By default it will be disabled .
      18. 18/Sep/2012 - UPDATE #17
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. acpuclock that Rick wrote and I managed to break:eek:, works again. So you have a new option under SETTINGS: SET MAX/DEFAULT CPU FREQ.
        2. Changed the menus. Rearranged SETTINGS and INFO and their entries.
        3. Fixed the charging while off problem that the last version had. Plus you don't need to unplug the cable in order to turn your phone on. Just press once the [CALL] button.
        4. Fixed errors regarding partition rearrangement.
          Also from that menu you can remove 'system' and 'userdata' from the partition table, by setting their order to 0. This will give you the chance to add 2 more extra boot partitions. If you went crazy and did that, but something doesn't work well, and you want back 'system' and 'userdata' you just have to RESET SETTINGS and the partition will return to default.
        5. Fixed some errors regarding add/remove %x%boot.
        6. Changed how the countdown in multiboot menu works. If you interact then the countdown is canceled.
        7. Added option whether to fill the bad block table at startup or not, FILL/SKIP FILLING BBT @ STARTUP under SETTINGS.
          Remember the option PRINT BAD BLOCK TABLE? If you don't select to FILL BBT @ STARTUP, then you won't see a BAD BLOCK TABLE because it will not be created. In simple words this means a little faster boot into cLK menu.
        8. At a (re)boot event the way LK is determining what to do is:
          First checks if any key was pressed, then checks the boot reason.
          For example, if you selected 'Reboot to bootloader' from android but in the process you want to boot to recovery, you can just press&hold the [HOME] button until the phone vibrates.
        9. Removed the function regarding auto-resizing small partitions which have bad blocks.
        10. Added a fading animation before booting any kernel or recovery.
      19. 18/Sep/2012 - UPDATE #18
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Fixed messed up menus if more than one extra boot partition exists.
      20. 20/Sep/2012 - UPDATE #19
        Code:
        [U]Default partition table:[/U] recovery=5,misc=1,boot=5,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Fixed messed up menus if the order of the extra boot partitions is changed from default.
      21. 24/Oct/2012 - UPDATE #20
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Increased default size of 'recovery' partition to 6MB and changed layout.
        2. Removed fading effect.
        3. Added back option to enable/disable usb detection ("USB" mark at the bottom of the screen if device connected to pc).
        4. Some platform code changes.
      22. 29/Oct/2012 - UPDATE #21
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Leds work. If you boot into cLK menu and your device is connected to a pc the led will go green. If not connected the led will stay turned off.
        2. Screen brightness can be adjusted. Added option under SETTINGS. The selected level will be the default at each boot.
        3. Entering cLK menu is slightly slower than before.
        4. Added an option to change UDC settings at will. This is an attempt to solve any usb issues you might have (fastboot errors) without having to re-compile cLK's binary with different udc settings. 1st set is the default one. 2nd is the set that cLK used to have initially (1.5_rc1). 3rd is not working for me either, but left it for testing. So lets see how this goes...
        5. When in cLK menu you can select items with the [MENU] button too(added this for those with broken [CALL] button).
      23. 11/Nov/2012 - UPDATE #22
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Changed some options under SETTINGS.
        2. Added option to use inbuilt off-mode charging under SETTINGS/SET DEFAULT OFF-MODE CHARGING. From that menu you can select it (option USE INBUILT OFF-MODE CHARGING) and try it out.
          If using inbuilt off-mode charging the device wakes up if you press POWER [button].
          This is an experimental feature! Only tested with original battery and charger.
          High Voltage (as measurement) is set to 4.2 V. Use at your own risk! Otherwise stick to the default way of charging (option USE RECOVERY'S OFF-MODE CHARGING).
        3. Usb detection function changed (option under SETTINGS/ENABLE USB DETECTION). "USB" mark at the bottom of the screen if device connected to pc is replaced by turning led on/off if connected/disconnected.
        4. Added some code as an experiment for a potential off-mode alarm application.
          More info in this thread.
          Warning : I didn't know java or how to use eclipse and make an android app. Seriously, I still don't. But after some days I managed to write this application mostly because I wanted to know if this idea was possible. So consider it as an example. Any criticism accepted:eek:. I just hope that someone may find it useful and make the best out of it.
      24. 19/Nov/2012 - UPDATE #23
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] CWM Recovery Touch Beta 8 Release Candidate 1
        [U]ExtRom:[/U] Disabled
        1. Added option to set the voltage threshold for inbuilt off-mode charging under SETTINGS. It can be set from 3.8 to 4.2 V.
        2. Changed the code for the off-mode alarm application based on Rick's suggestions. In order to work you need to have a patched kernel like this one. More info on off-mode alarm in this thread.
        3. Added some code for another project, a multiboot android app. More info here.
        4. Small fixes.
      25. 23/Nov/2012 - UPDATE #24
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] (a)CWM Recovery Touch Beta 8 Release Candidate 1 Or (b)TWRP 2.2.2.0 with new zImage (patched tytung's latest GB-kernel)
        [U]ExtRom:[/U] Disabled
        1. Voltage threshold for inbuilt off-mode charging can be set from 3.7 to 4.2 V.
        2. First attempt to fix problem with suspend mode.
        3. Each included recovery is edited to fix the problem with the limitation of total mtd partitions(before edit the max was 11 - now I've set it to 20).
      26. 05/Feb/2013 - UPDATE #25
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] Extended TWRP 2.4.1.0.r1
        [U]ExtRom:[/U] Disabled
        1. Fixed output for option to make an 'autosize' partition 'fixed-size'.
        2. If set to do so, fill bad block table before any flash_write will be called(like in set_recovery_message()).
        3. Add ability to change ptable according to values passed from recovery_msg.
        4. Ported commits from mainline lk.
      27. 06/Feb/2013 - UPDATE #26
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] Extended TWRP 2.4.1.0.r1
        [U]ExtRom:[/U] Disabled
        1. Changes relevant to memory offsets:
          Code:
          RAMDISK_ADDR     		:= "(BASE_ADDR+0x01000000)"
          SCRATCH_ADDR     		:= "(BASE_ADDR+0x02000000)"
      28. 11/Feb/2013 - UPDATE #27
        Code:
        [U]Default partition table:[/U] recovery=6,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] Extended TWRP 2.4.1.0.r2
        [U]ExtRom:[/U] Disabled
        1. Added ability to wake the device while off-mode charging by pressing the middle [MENU] button (for those with power button problem).
        2. Updated the change_ptn_layout() function to be compatible with new Extended-TWRP.
      29. 14/Mar/2013 - UPDATE #28
        Code:
        [U]Default partition table:[/U] recovery=8,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] Extended TWRP 2.4.4.0.r1
        [U]ExtRom:[/U] Disabled
        1. Increased default size of recovery partition to 8MB.
        2. Updated the change_ptn_layout() function to be compatible with new Extended-TWRP.
      30. 6/May/2013 - UPDATE #29
        Code:
        [U]Default partition table:[/U] recovery=8,boot=5,misc=1,system=150,userdata=0,cache=5
        [U]Included recovery:[/U] Extended TWRP 2.5.0.3
        [U]ExtRom:[/U] Disabled
        1. Update get_rom_name_from_cmdline(): return NAND if cmline = "no_console_suspend=1 console=null".
        2. Update included version of recovery in nbh file.
    64
    Posts have been re-ordered, Look above.
    63


    Drivers and Utilities
    The following tools are provided here, for linux(ubuntu 64bit binaries), windows and mac:
    • adb
    • fastboot
    • mkbootimg (not windows)
    • unpackbootimg (not windows)

    Q: What is cLK?
    A: cLK is a homebrew bootloader which will allow you to boot into android directly on your windows mobile phone.

    Q: Is it better then magldr ?
    A: This question is heavily dependent on the user and his needs however the following points might help you make a better choice:
    • magldr is capable of booting Windows Phone 7.x.
    • cLK boots a tad faster than magldr as it does not wait for radio processor on boot.
    • cLK is open source so you can give/take what you want and learn stuff while doing so.
    • cLK has Partitioning tools inbuilt, you'll never have to hook your phone to a computer ever again, just for flashing a rom!
    • cLK has recovery inbuilt for users with broken usb port.
    • cLK supports off-mode charging

    Known issues
    • RMNET does not work.

    Related projects
    57
    [07 Jun 2011][BOOTLOADER]+[RECOVERY]cLK v1.4.0.1

    Contents
    Post 6: cLK compile HowTO (Linux)
    Post 7: cLK compile HowTO (Windows)
    Post 8: ROMs, HowTOs, Utilities (created by others)
    Post 9: convert magldr ROM to cLK HowTO


    Source code


    Drivers and Utilities
    The following tools are provided in here, for linux(ubuntu 64bit binaries), windows and mac; thanks to Segnale007, who compiled them for mac.
    • adb
    • fastboot
    • mkbootimg (not windows)
    • unpackbootimg (not windows)
    50
    cLK v1.5
    Check first post for information.

    You're free to mirror it, but possibly include a link to this thread incase of future updates.
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone