• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

3G USB modem, all commands.....

Search This thread

SiberCoder

New member
Jun 27, 2012
1
0
ZTE AT-commands
disable/enable flash cd-drive
AT+ZCDRUN=8 disable
AT+ZCDRUN=9 enable

stay online
AT+ZOPRT=5


check net-/SIMlock
AT+ZSEC?
answer: <SEC_STATUE>,<SEC_ITEMS>

< SEC_STATUE >:
0 Initializing the encryption (Insignificant SEC_ITEMS)
1 Network Lock error. (Insignificant SEC_ITEMS)
2 Network Locked
3 Unlocked or correct MCC/MNC

<SEC_ITEMS>:
0 No action
1 Network lock
2 (U)SIM card lock
3 Network Lock and (U)SIM card Lock

Unlock
+ZNCK="unlock-code"
+ZNCK?
Unlock residual time 0-5



Report signal strength +ZRSSI
Syntax
+ZRSSI parameter command syntax
Command Possible response(s)
+ZRSSI <CR><LF>+ZRSSI:<rssi>,<ecio>,<rscp><CR><LF><CR><LF>
OK<CR><LF>

<CR><LF>+CME ERROR: <err><CR><LF>


Description
This command is used to report signal strength.. Notice the command is used only in platform
6290 and 6246.
Defined values
3G network(registered to 3G network)
+ZRSSI: rssi,ecio,rscp
The unit of Rscp is 0.5dbm ( in 0.5 dBm step with no sign).
The unit of Ecio is 0.5db ( in 0.5 dB step with no sign).
The relation is: 2*rssi=rscp-ecio
e.g.
+ZRSSI: 49,8,106
Rssidbm = -rssi = -49dbm
Eciodb = -ecio/2= -4db
Rscpdbm = - rscp /2= -53dbm
2G network(there is no ecio and rscp value when registered in 2G network ,so set
value of 1000)
e.g.
+ZRSSI: rssi,1000,1000
No network e.g.
+ZRSSI :OK
Notice! the command is used only in platform 6290 and 6246.

Set Operational Mode
AT+ZSNT=0,0,0 (Auto) - Default
AT+ZSNT=1,0,0 GPRS Only
AT+ZSNT=2,0,0 3G Only
AT+ZSNT=0,0,1 GPRS Preferred
AT+ZSNT=0,0,2 3G Preferred

Query Operational Mode
AT+ZPAS?
<CR><LF>+ZPAS:<network>,<srv_domain><CR><LF>OK<CR><LF>
<network>: the type of current network
No Service
Limited Service
GPRS
GSM
UMTS
EDGE
HSDPA
<srv_domain>: service domain
CS_ONLY: CS domain service available.
PS_ONLY: PS domain service available.
CS_PS: CS&PS domain service available.
CAMPED: camped in a cell.
example
Command: AT+ZPAS?
Response: +ZPAS: "GPRS","CS_PS"
OK


Set Band Status +ZBANDI
at+zbandi=0 • Automatic (Auto) - Default
at+zbandi=1 • UMTS 850 + GSM 900/1800
at+zbandi=2 • UMTS 2100 + GSM 900/1800 (Europe)
at+zbandi=3 • UMTS 850/2100 + GSM 900/1800
at+zbandi=4 • UMTS 850/1900 + GSM 850/1900
Notice! the command is used only in platform 6290 and 6246.






HUAWEI MODEM

AT
OK

ATX
OK

ATI

OK


AT^U2DIAG=0
OK