4.3 bootloader/No knox/no binary count/wi-fi working (Alternative) for GT-N7100

[faria]

For future use

 

[faria]

For future use

 

[faria]

4.3 bootloader/No knox/no binary count/wi-fi working (Alternative) for Note 2

ONLY FOR THE GT-N7100 INTERNATIONAL MODEL(GSM)

This package is only for devices that still have old bootloaders or are using patched bootloader including wi-fi patches.
SEE POST 2 FOR MORE INFO
1. Download the package from the link.
2. Extract the package.
3. Boot your device into download mode.
4. Flash the final tar via odin PDA mode.
DEVICE WILL ENTER RECOVERY MODE,PRESS THE POWER BUTTON TO REBOOT.
5. Use triangle away to remove the binary if you have it.

This package will not fix already Knox triggered devices.
This will not help you if you already flashed the 4.3 official rom with Knox bootloader.
This package contains 4.3 bootloader, recovery, kernel and modem.
Package will add a new entry to download mode called warranty bit: 0
Package has been tested many times by me.
You will be able to downgrade with this package.

I will not be held responsible for any arising divorces due to you yelling at your device and spending too much time trying to fix it when flashing this package, do so at your own risk. Do not flash if you don't know what i'm on about.

How to use:
Flash this package before flashing any custom 4.3 rom.


Other uses:
Flash this package then a custom recovery, install all your zip update files. Once your done reflash the package and run triangle away to get rid of the binary count.
Now you can have a device with a 4.3 without random reboots, working wi-fi and no binary count.

Thanks to all the XDA users that made this possible.

Package with mj5 bootloader and mj9 modem [BTU] UK

************************************************************************************
Requested Packages with custom Modems
Package with mj5 bootloader and mj5modem

You can find a prior way of achieving the above in this thread by Robalm,Minus recovery and modems.

 

[faria]

How to set SELinux from enforcing to permissive

How to set SELinux from enforcing to permissive.

YOUR DEVICE MUST BE ROOTED

First you need SuperSU from chainfire, xposed framework and wanam exposed module.

Download the xposed framework and follow the instructions on how to install it, then install the wanam xposed module and activate it within the xposed framework.
Open SuperSU, go to settings, tick enable SU during boot and tick trust system user.
Open the wanam xposed module and press the security hacks tab and then tick disable SEAndroid box.
Reboot your device.
Your SElinux will now be set to permissive.

http://selinuxproject.org/page/SEAndroid

 

[faria]

FAQ:

Package is made simple so you can fix 4.3 bootloops, wifi problems and downgrade to 4.1 without any additional steps.
This is only applicable to devices that have never been flashed with the official 4.3 update.
How to downgrade to 4.1?
Flash the Package then flash the official 4.1 rom

Can i use this package to upgrade to a 4.3 custom rom?
Yes and its a must. Flash it before or after flashing custom rom.

Can i use this package to Set my device to OFFICIAL status?
yes, After flashing it use Triangle away to Fix your Status.

can i flash this if i have problems with wifi on 4.2?
Yes

Can i flash this to fix my boot-loops in 4.3 ?
Yes

Can i use this package with 4.1?
NO!

Can i use this package to revert Knox to X0?
NO.

Will this package Trigger my binary?
No.

Q. I have already flashed a 4.3 custommrom, can i still flash this?
Yes

Package can be also be flashed to any official rom as long you never had a Knox bootloader. (eg. a offical rom flashed by mobile odin.)

Package is not compatible with mobile odin so dont even try, it won’t work.

 

[zygzoo]

good news

 

[vagsvag]

Thx 4 this. Anyone tried it?

Sent from my GT-N7100 using Tapatalk 2

 

[crisgen]

Doesn't work with mj5 bootloader....... Right?
Obviously with knox counter not active...

Inviato dal mio GT-N7100 utilizzando Tapatalk

 

[TITAN-23]

Great News

Well done! Is it possible to post a version with only the bootloader?

 

[faria]

Doesn't work with mj5 bootloader....... Right?
Obviously with knox counter not active...

Inviato dal mio GT-N7100 utilizzando Tapatalk

the package contains an mj5 bootloader so i guess it will be fine.

 

[faria]

Well done! Is it possible to post a version with only the bootloader?

Yes but i rather not post it here to avoid issues/problems (thinking of new users etc)give me a few minutes and i will pm you a link.

Edit.... in order to have reset the binaryi need to include the stock kernel,is this ok or you just want the boot loader?

 

[TITAN-23]

Thanks so much. Just the bootloader please.

 

[faria]

Thanks so much. Just the bootloader please.

Pm sent.

 

[KoKoMaster]

Pm sent.

thanks for this. could i get the bootloader only as well? id like the fix but keep my current modem. no one seems to deal with the mj4 modem for my region (TPA) thanks.

 

[tegben]

thanks for this. could i get the bootloader only as well? id like the fix but keep my current modem. no one seems to deal with the mj4 modem for my region (TPA) thanks.

+1

 

[faria]

+1

if you post your modem i will repackage for you,meanwhile i will send you the link to boot loader only.

 

[KoKoMaster]

Heres link to the mj4 modem I made
https://www.dropbox.com/s/kap2bde6bgv03i2/mj4 modem.zip

I followed the instruction from this link so I hope I did it right
http://forum.xda-developers.com/showthread.php?t=2044937

 

[faria]

Heres link to the mj5 modem I made
https://www.dropbox.com/s/kap2bde6bgv03i2/mj4 modem.zip

I followed the instruction from this link so I hope I did it right
http://forum.xda-developers.com/showthread.php?t=2044937

that's fine, it 2 am here, I will do it tomorrow.

 

[lontu]

Seems will not work with MJ9 bootloader then why the screenshot having MJ9 bootloader?

 

[faria]

Seems will not work with MJ9 bootloader then why the screenshot having MJ9 bootloader?

Mj5 bootloader mj9 modem.