[5.0.2][UNOFFICIAL]CyanogenMod 12[01/04]

[anerik]

CyanogenMod 12 for the Moto G

WARNING: This ROM has been tested only on XT1032. It should also be fully functional on XT1034 and GPe. CDMA users and XT1033 users are probably going to have a hard time making it a daily driver.

Here's my unofficial CM12 build. I added some things to the sources and linked my repos at the end of the post. Have fun!

Bugs/Not working

-Hotspot Wi-Fi
-Root. Just flash SuperSU and disable the built-in from the developer settings
-Netflix
-VoIP calls
-Messed up RAM usage?

Installation steps

-Place both rom and gapps on the storage
-Reboot to recovery (i like twrp)
-Wipe data, dalvik, cache, and format system
-Install rom followed by gapps
-Reboot and enjoy!

Downloads

cm-12-20150104-UNOFFICIAL-falcon.zip
MEGA Mirror thanks to @Josuegrs
For gapps i like to use PA GAPPS
Lowmemorykiller init.d script (delete txt extension, move to system/etc/init.d and give it executable perms 755, thanks to @attack11)

Changelog (unofficial changes to the source)

[I]20150104[/I]
-Up to date with latest CM changes
-msm8226-common: Re-enable performance profiles
-msm8226-common: Update A2DP policy

[I]20141230[/I]
-Removed platform-specific selinux policies and back to permissive mode
-Updated with latest CM changes. Should fully boot now. Make a clean install just in case

[I]20141227[/I]
-falcon: Update build fingerprint for XT1032 GPe
-msm8226-common: Add ethernet via OTG feature
-msm8226-common: Fixed AOSP camera issues
-The rest of the official device-specifics commits have been merged

[I]20141223[/I]
-msm8226-common: Fix a2dp sample rate
-msm8226-common: Enabled NuPlayer instead of AwesomePlayer (we don't use LPA or Tunnel so it should be ok; also i read this fixed a2dp on some devices and mine was broken)
-msm8226-common: Added FFMPEG codecs for extended media support

My sources

For CM's latest changes check their gerrit or their GitHub (might be easier to read). I will NOT include these commits in my changelogs.

XDA:DevDB Information
CyanogenMod 12, ROM for the Moto G

Contributors
anerik, CyanogenMod
Source Code: https://github.com/CyanogenMod

ROM OS Version: Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked bootloader & custom recovery

Version Information
Status: Nightly

Created 2014-11-23
Last Updated 2015-01-04

 

[reversegear]

Awesome

I'll test and update with gpe converted 1033

 

[s.sawrav]

Awesome

I'll test and update with gpe converted 1033

Already did it bro,the incall audio works while calling but the call does not disconnect when you hang up also you can't recieve call,the device dowsn't ring even if someone called your number,but i guess we are getting closer.

 

[natheux]

Thanks Your version is very stable (for an alpha ^^) but in Settings -> Display -> Advanced settings not work :/ Do you know why ?

 

[pico hackr]

Thanks for the new source built rom and i hope it wont work in xt1033 as mentioned in the op will wait for the updates .Thanks again hope everything works in future builds

 

[anerik]

Thanks Your version is very stable (for an alpha ^^) but in Settings -> Display -> Advanced settings not work :/ Do you know why ?

Cm probably added nothing there yet or it's just not available for our phone

 

[haseeb_heaven]

Does call work

does call work in this build ?

 

[MarckozZ]

Downloading and testing right now! :good:

 

[anerik]

does call work in this build ?

did you read the op or what

 

[reversegear]

@s.sawrav what is ur baseband...

 

[russ722]

Anyone try this out with a cdma moto g yet?

 

[s.sawrav]

did you read the op or what

@s.sawrav what is ur baseband...

Alright guys i found a solution to fix call related issue on XT1033 conv. gpe devices,all you have to do is copy the given META-INF folder and replace it with anerik's build META-INF folder,and everything will work with one sim.The problem was in updater script i think.The meta-inf folder i used was from @SeannyM's Build.

So happy that i finally figured it out and thank you all the devs for your work @SeannyM @Alberto97 @anerik @Somcom3X

I'm uploading the meta-inf folder.
@anerik should i upload your build with the changes made or should i just upload the META-INF folder?

EDIT:-There's seems to be a big problem,when i rebooted the phone,it turned back to the way it was before,i can't understand,i'll convert it to gpe again and then flash one more time an see.

 

[reversegear]

Alright guys i found a solution to fix call related issue on XT1033 conv. gpe devices,all you have to do is copy the given META-INF folder and replace it with anerik's build META-INF folder,and everything will work with one sim.The problem was in updater script i think.The meta-inf folder i used was from @SeannyM's Build.

So happy that i finally figured it out and thank you all the devs for your work @SeannyM @Alberto97 @anerik @Somcom3X

I'm uploading the meta-inf folder.
@anerik should i upload your build with the changes made or should i just upload the META-INF folder?

This is awesome 1033 back in action

U upload Only updater script instead of full ROM

 

[padhu1989]

Alright guys i found a solution to fix call related issue on XT1033 conv. gpe devices,all you have to do is copy the given META-INF folder and replace it with anerik's build META-INF folder,and everything will work with one sim.The problem was in updater script i think.The meta-inf folder i used was from @SeannyM's Build.

So happy that i finally figured it out and thank you all the devs for your work @SeannyM @Alberto97 @anerik @Somcom3X

I'm uploading the meta-inf folder.
@anerik should i upload your build with the changes made or should i just upload the META-INF folder?

Perfect.. Did you tested it by yourself...?

 

[Brawn_Sg]

Thats very stable but no sim working in xt1033 nd no multi users nd ambient display

 

[deeplyyoung]

Good to see some moves for XT1033, can some one pls share few SS of cutie here.....

 

[anerik]

Alright guys i found a solution to fix call related issue on XT1033 conv. gpe devices,all you have to do is copy the given META-INF folder and replace it with anerik's build META-INF folder,and everything will work with one sim.The problem was in updater script i think.The meta-inf folder i used was from @SeannyM's Build.

So happy that i finally figured it out and thank you all the devs for your work @SeannyM @Alberto97 @anerik @Somcom3X

I'm uploading the meta-inf folder.
@anerik should i upload your build with the changes made or should i just upload the META-INF folder?

all right, i'll add it to the op

Thats very stable but no sim working in xt1033 nd no multi users nd ambient display

last 2 are easy 2 add

 

[Flashhhh]

Alright guys i found a solution to fix call related issue on XT1033 conv. gpe devices,all you have to do is copy the given META-INF folder and replace it with anerik's build META-INF folder,and everything will work with one sim.The problem was in updater script i think.The meta-inf folder i used was from @SeannyM's Build.

So happy that i finally figured it out and thank you all the devs for your work @SeannyM @Alberto97 @anerik @Somcom3X

I'm uploading the meta-inf folder.
@anerik should i upload your build with the changes made or should i just upload the META-INF folder?

Even incomings calls working?

sent from my falcon!!

 

[casshern94]

does this work on xt1033(dual sim mode)?
most importantly is wifi/call/sms and mobile data

 

[ashwin007]

Alright guys i found a solution to fix call related issue on XT1033 conv. gpe devices,all you have to do is copy the given META-INF folder and replace it with anerik's build META-INF folder,and everything will work with one sim.The problem was in updater script i think.The meta-inf folder i used was from @SeannyM's Build.

So happy that i finally figured it out and thank you all the devs for your work @SeannyM @Alberto97 @anerik @Somcom3X

I'm uploading the meta-inf folder.
@anerik should i upload your build with the changes made or should i just upload the META-INF folder?

Can you pm me the link to meta-inf folder ...thx in advance...