In the Xperia user group in
cafe.naver.com/x1smart
I'm HTCMAGE.
Last year, Xperia 1II.
How to activate VoLTE.
After the guide version,
forum.xda-developers.com
5II and...
Xperia's 1III/5III products.
Activating VoLTE and...
"Root".
I'll share how to turn it off.
I am not good at English.
I use the translator.
Please understand.
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader
Later, to unlock.
Maejiseukeu manager app.
Patch. magiskFiles img
While connected to your computer with a usb
You can use the instructions below at least adb.
adb reboot bootloader && fastboot flash boot "magisk.img" && fastboot reboot
Then, you can install it.
It's going to rebooted.
This is the restart screen. It's connected to USB.
Always allow debugging when enabled.
Connect to Wi-Fi and do not log in.
Please move on quickly.
Turn off the internet quickly (Mobile data X)
Save the magisk manager app on your computer.
Then go to Xperia and install it.
github.com/topjohnwu/Magisk/releases/tag/v23.0
Please make sure the Internet is turned off.
I'll carry it out. Magisk Manager in the upper right corner.
Cogwheel - Setting page - Middle.
Activate "Hide".
When it's done, we'll start the VoLTE patch.
At least ADB.
Adb shell.
Enter and enter.
su
If you type it in,
In the same window as the picture below,
If you allow it,
The shape of the dollar...
It changes to #.
setprop persist.usb.eng 1
Enter and enter.
It's from My Computer Properties Device Manager.
There are several floating yellow exclamation marks.
Drive manually.
Please hold it.
Among the yellow exclamation points,
We don't know which part is connected.
Please select a few targets and update them manually.
Update Driver - Browse to My Computer
Directly select the list available on your computer.
Port-QUALCOM 9081 choice.
Starting with the ELS Explorer selection LAHA (based on 1 III).
This is something that can go in. If you connect...
Please copy and paste the EBS file.
(Use the mouse to pull it in and put it in twice.)
I'll make a folder that doesn't exist.
Put it in twice.
Policyman folder delete the existing one.
You can put it in and the NV at the top...
Likewise, place it at the top.
Close the window when done.
adb shell su -c setprop persist.dbg.volte_avail_ovr 1
adb shell su -c setprop persist.dbg.vt_avail_ovr 1
And then "adb reboot".
If you type Enter, we'll reboot you.
cafe.naver.com/x1smart
I'm HTCMAGE.
Last year, Xperia 1II.
How to activate VoLTE.
After the guide version,

VOLTE Success, Activation without Firmware Replacement (Sony Mobile withdrawal area)
Hello Xperia users! In the meantime, I finally solved the VOLTE problem! I approached Qualcomm's diagnostic port-active-efsExplorer and solved the problem by inserting a VOLTE profile from my carrier :) Sorry, this is Korea and I am Korean...

5II and...
Xperia's 1III/5III products.
Activating VoLTE and...
"Root".
I'll share how to turn it off.
I am not good at English.
I use the translator.
Please understand.
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader
Later, to unlock.
Maejiseukeu manager app.
Patch. magiskFiles img
While connected to your computer with a usb
You can use the instructions below at least adb.
adb reboot bootloader && fastboot flash boot "magisk.img" && fastboot reboot
Then, you can install it.
It's going to rebooted.
This is the restart screen. It's connected to USB.
Always allow debugging when enabled.
Connect to Wi-Fi and do not log in.
Please move on quickly.
Turn off the internet quickly (Mobile data X)
Save the magisk manager app on your computer.
Then go to Xperia and install it.
github.com/topjohnwu/Magisk/releases/tag/v23.0
Please make sure the Internet is turned off.
I'll carry it out. Magisk Manager in the upper right corner.
Cogwheel - Setting page - Middle.
Activate "Hide".
When it's done, we'll start the VoLTE patch.
At least ADB.
Adb shell.
Enter and enter.
su
If you type it in,
In the same window as the picture below,
If you allow it,
The shape of the dollar...
It changes to #.
setprop persist.usb.eng 1
Enter and enter.
It's from My Computer Properties Device Manager.
There are several floating yellow exclamation marks.
Drive manually.
Please hold it.
Among the yellow exclamation points,
We don't know which part is connected.
Please select a few targets and update them manually.
Update Driver - Browse to My Computer
Directly select the list available on your computer.
Port-QUALCOM 9081 choice.
Starting with the ELS Explorer selection LAHA (based on 1 III).
This is something that can go in. If you connect...
Please copy and paste the EBS file.
(Use the mouse to pull it in and put it in twice.)
I'll make a folder that doesn't exist.
Put it in twice.
Policyman folder delete the existing one.
You can put it in and the NV at the top...
Likewise, place it at the top.
Close the window when done.
adb shell su -c setprop persist.dbg.volte_avail_ovr 1
adb shell su -c setprop persist.dbg.vt_avail_ovr 1
And then "adb reboot".
If you type Enter, we'll reboot you.
Last edited: