[6.0.x|SM-N900| Unofficial LineageOS 13.0 (ha_3g)

Search This thread

TheKaptan23

Senior Member
Jul 2, 2014
76
30
I have a problem. Whatsapp call doesn't work. My voice don't send to opposite. How is the fix this problem?
 

etch_kayy

Senior Member
Sep 20, 2016
525
245
30
Karachi
Guys what about my data? All the apps and ****??
It's always better to install it all again but if you have a metered or slow Internet connectivity then I'd advise using titanium backup and just backing up the user apps with their data... only the ones you need and then clean flashing the ROM and if everything seems fine just restore app+data with the same app...
Edit: sorry about the typos, it was barely readable.
 
Last edited:
  • Like
Reactions: Yolosologuy

etch_kayy

Senior Member
Sep 20, 2016
525
245
30
Karachi
i have a problem with sleep time my device was 70℅ at 1am at the morning i found it 25℅
System apps don't do it, they can but they really don't, it must be a user application, install Wakelock Detector from PlayStore and if that happens again just check the WLD app to see which app keeps your phone awake, if it's a user app try disabling permissions, or uninstalling and getting an alternate, and if it's a system app then there must be some settings issue, used this ROM for around 2-3 months, never happened with me, I'm on 14.1 now...
 
  • Like
Reactions: hassanco11

SAINI99

Senior Member
Oct 13, 2009
506
190
Screenshot_20170103-194914.pngScreenshot_20170103-194908.png

Sent from my SM-N900 using Tapatalk
 

SirAnKeKu

Senior Member
Oct 8, 2016
499
138
Sungailiat
Bu rom boyle guzel bi hal almaya baslamisken gelismesinin durdulmasi cok sacma
He said:"Stopping the development of this beautiful story with this romance is very frustrating". Tell me if i'm wrong ?
Evet. Sinir bozucu. Fakat, en azından yeni güzel bir bölüm için yeni bir gelişme var. Ayrıca lütfen İngilizce olarak mesaj atın, tamam mı?
 
Last edited:

hoezans

Senior Member
Oct 17, 2016
79
4
Redmi Note 8 Pro
Yes my brother rom is not fully prepared but it would be nice to continue until it is completely okay and it would be nice and I have studied the form of your underpinnings of big things but I have never worked with writing but I finally wanted to write thank you for good jop
 

tincho5588

Senior Member
Oct 30, 2012
766
4,510
Villa Carlos Paz
Yes my brother rom is not fully prepared but it would be nice to continue until it is completely okay and it would be nice and I have studied the form of your underpinnings of big things but I have never worked with writing but I finally wanted to write thank you for good jop
ROM is fully prepared...
Otherwise, telle what else could be done to improve it?
 

hoezans

Senior Member
Oct 17, 2016
79
4
Redmi Note 8 Pro
Yes I am against the problem of charging I do not know how to use it sometimes I am against the problem of the network I am against the problem of the network I have been using for a long time and the sound is not clear at the headphones in general I use the ROM is good but I recommend you to interfere with the battery. I do not use rom :) I do very well doing your work emeginize respect and love these rum
 

ezzkht

Senior Member
Feb 25, 2004
461
54
45
Amman
www.ezzkhayyat.com
ROM is fully prepared...
Otherwise, telle what else could be done to improve it?

Screen rotation in lock screen. It's annoying me so much. Is there a quick fix or patch?
Thanks a lot for your tremendous efforts, really!

---------- Post added at 06:29 PM ---------- Previous post was at 06:27 PM ----------

Im just switched off all gps apps permisson except navigation, remove all g search services like gnow google search etc, and reduced cpu to 1700 with intaractive mode.

I tried to limit CPU to 1700 but phone become a bit slower and sometimes lags, especially with heavy apps such as Facebook.
 

M.Yaman34

Member
Jan 26, 2012
8
1
Istanbul
Am I wrong or you guys haven't test stock rom's battery life. Becouse this rom is a battery monster after the stock rom. I'll test stock rom again against possibility of misunderstanding.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 105
    LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
    It is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.​



    http%3A%2F%2Fimg.imgland.net%2FBINawli.png



    Code:
    #include <std_disclaimer.h>
    
    /*
     * Your warranty is now void.
     *
     * We are not responsible for bricked devices, dead SD cards,
     * thermonuclear war, or you getting fired because the alarm app failed. Please
     * do some research if you have any concerns about features included in this ROM
     * before flashing it! YOU are choosing to make these modifications, and if
     * you point the finger at us for messing up your device, we will laugh at you.
     *
     */


    http%3A%2F%2Fi.imgur.com%2Fv3ogd3K.png



    This thread is for Unofficial LineageOS 13.0 builds for ha3g (SM-N900). The following will not be supported here:
    Custom kernels
    Mods
    Xposed

    I don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
    Flashed a custom kernel
    Installed or did mods from untrusted sources
    Modified system files


    http%3A%2F%2Fimg.imgland.net%2F_4JAwRZ.png



    First time flashing LineageOS 13.0 on your device, or coming from another ROM?
    Download the zip(s)
    Install a compatible Recovery
    Perform a nandroid backup of your current ROM (Optional)
    Wipe data/factory reset
    Flash LineageOS
    Install the Google Apps addon package (Optional)
    Reboot


    http%3A%2F%2Fimg04.imgland.net%2FAg8dlGr.png


    Current Build:
    02/07/17 build (LineageOS 13.0)

    Older Builds:


    Google Apps:
    http://opengapps.org/

    Want Root access? Flash this!
    SuperSU 2.79



    http%3A%2F%2Fi.imgur.com%2FYqwQOKx.png



    02/07/2017
    *Fixed bad quality on the camcoder
    *Fixed problems with Android Auto
    *Everything that uses the AVC/h264 encoder will work well now
    *Built with up to date LineageOS sources

    Older Changelog:

    02/05/2017
    *Switched from CM to LineageOS
    *Stability improvements for RIL
    *Fixed wifi crashes plus other stability patches applied
    *Doze now uses the Significan Motion Sensor
    *Disabled fake shadows... UI shadows look more realistic now
    *Fixed AudioFX! It is back into the ROM and it works great!
    *Improvements for noise cancelation
    *Codecs and Scalers are built from source now
    *Some changes to the camera relevant code
    *Gralloc has been updated
    *Interactive Governor has been tuned for better battery life
    *Lots of other under the hood changes
    *The ROM feels a lot smoother now
    *Battery life should be better now

    12/10/2016
    New power saving feature included: Advanced Low Power Audio (click here for more info)
    Input Boosters disabled by default
    Spen power saving enabled by default

    12/04/2016
    New kernel control app included: Deathly Adiutor (check it out on google play!)
    Added support for 3000ma chargers.
    Added support for UBS3.0 charging speeds (Up to 1000ma).
    Added screen on charging limiter to avoid high heat generation while charging.
    Screen rotation fixed in this build.
    Interactive is the default governor again.
    Some RIL changes that could solve the problems some people are having with cellular connection.
    KERNEL: Tuned ondemand governor to match Samsung stock values.
    KERNEL: epen_saving_mode node now shows the current state of the feature.
    KERNEL: touchkey glove_mode node now shows the current state of the feature.
    KERNEL: added new sysfs to enable/disable input boosters (touchscreen, touchkey and spen)

    11/25/2016
    Fixed s5p-mem ownership. This was affecting battery drain and Deep sleep times.
    Fixed battery kernel wakelock. This was affecting Deep Sleep times, causing the device to be awake more than normal.
    KERNEL: battery: Add MAX77803/UNIVERSAL5420 charger control.
    KERNEL: Rewrote/exposed proper handling of power supply properties. Reported charging currents limits are correct now.

    11/18/2016
    DRM Fixed. You can now play DRM protected content. This should also fix WiFi Display, needs testing and confirmation.
    Tweaked Thermal driver. Device should heat a bit less under stress.
    Updated dalvik/hwui for 3GB.
    KERNEL: Fixed GPU control nodes.
    KERNEL: Fixed CPU Thermal nodes.

    11/05/2016
    Usb otg fixed
    NFC battery drain fixed
    Multiwindow enabled by default
    Vibrator intensity enabled
    Dexpreopt enabled (no more optimizing apps on first boot)
    Updated GPS Blobs
    Reworked and updated ramdisk.
    KERNEL:
    gpu oced to 533mhz
    added gpu custom control interface (has some bugs, will get fixed in upcoming build)
    added gpu voltage control
    added gpu thermal control interface
    several fixed for CPU governors
    removed CPU slim governor
    added and updated some CPU governors

    10/27/2016
    Mobile data 100% fixed in this build. No more slow data for some carriers.
    Bluetooth 100% fixed in this build. Proper fix applied, you dont need to flash a fix now.

    10/25/2016
    Updated the ril class to be inline with the other 5420 devices.
    Lag fix is now built from sources (Thanks to Safarend for his sources!). ROM should be even more fluid now, better battery life also.
    Samsung_symbols shims are now built from sources (Thanks to Safarend for his sources!).
    Updated media profiles and media codecs configs (Credits to ShevT for the configs). This solves problems while reproducing videos (skips, lags, etc).
    Reverted radio properties to stock on build.prop. Should solve slow mobile data problems.

    10/22/2016
    This build should fix bluetooth. Needs testing.
    New RIL blobs from P601XXUDOJ2.

    10/20/2016
    Fixed mobile data issues introduced in 10/19 build.

    10/19/2016
    MOBILE DATA IS BROKEN IN THIS BUILD!! will be fixed in upcoming build.
    AudioFX removed. It doesnt get along well with yamaha prebuilt audio.
    Ondemand and Interactive governors tuned. Should improve battery life a lot.
    Ondemand is the default Governor now.
    New camera blobs. Camera quality should be better. Its also faster and more reliable now.
    Fixed "Slow Charging" message on lockscreen.
    New DRM blobs. Widevine security level is L1 now!
    Under the hood changes for audio reproduction, video reproduction, and wifi. Should improve battery life without compromising quality.

    10/11/2016
    Force api1 for camera2
    Added SamsungDoze support (aka Ambien Display). You are gonna find it under gestures, on settings.
    Standby battery consumption should be much better now (Thanks to SamsungDoze inclusion)
    Overlays cleaned and updated.
    You can HotSwap your microSD card now.

    10/10/2016
    Latest security patch (October) applied
    Camera is now working
    Proximity sensor is now working
    Reverted back to ha3g ril subclass (The slte subclass made the ril to act funny after the October security update)
    Enabled OpenGLES 3.1 instead of 3.0 (The M gpu driver has support for this)

    10/5/2016
    Updated all blobs to the stock lollipop base (minus libsec-ril)
    This fixes all of the lag spikes and other minor lag issues that were happening

    10/2/2016
    Updated the ril class to be inline with the other 5420 devices
    Changing to 2g works now
    ConsumerIR is fixed
    Incall volume is fixed

    9/29/2016
    Lag is fixed
    Bluetooth is fixed
    M gpu driver added
    OMX blobs function
    Charging speed should be better

    9/24/2016
    Initial Release



    http%3A%2F%2Fimg03.imgland.net%2FGdaEH5d.png



    *You tell me!

    Other issues?
    Before posting in this thread, make sure of a few things:

    You used the search function of the forums.
    If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
    Make sure your post is relevant to this thread.
    Logs! You can use this: https://play.google.com/store/apps/d....tortel.syslog


    http%3A%2F%2Fimg04.imgland.net%2F2uCBhNw.png



    @UpInTheAir for his kernel magic and misc fixes
    @crpalmer (for picassowifi device and kernel gits)
    @eousphoros (for his work on klimtwifi)
    @nvertigo67 (for his work on chagallwifi)
    @Nexorrr (for his work on chagalllte)
    Exynos5420 Dev Team (@deadman96385 @thompatry @ZakooZ @Orion116 @mosimchah
    @joshndroid @Andmoreagain @thermskin, @javelinanddart, @tincho5588)


    Source Code:
    Kernel
    https://github.com/exynos5420/android_kernel_samsung_exynos5420/tree/cm-13.0
    Device Tree
    https://github.com/exynos5420/android_device_samsung_ha3g/tree/cm-13.0


    XDA:DevDB Information
    [6.0.x|SM-N900| Unofficial LineageOS 13.0 (ha_3g), ROM for the Samsung Galaxy Note 3

    Contributors
    deadman96385, tincho5588
    ROM OS Version: 6.0.x Marshmallow
    ROM Kernel: Linux 3.4.x
    Based On: LineageOS

    Version Information
    Status: Stable

    Created 2016-09-24
    Last Updated 2017-02-07
    34
    Bugs:
    Camera is a little laggy but usable

    Kernel Info:
    • M Kernel base from the Galaxy Tab S
    • M GPU driver from Galaxy Tab S
    • CPU Voltage Control
    • CPU OverClock/UnderClock (Up to 2.1GHZ)
    • MIF/INT Voltage Control
    • Wolfson Sound Control (No Yamaha support)
    • UKSM instead of KSM
    • Added the following IO Schedulers: fifo, fiops, sioplus, tripndroid, vr, zen, bfq (Default)
    • Full f2fs support updated off the mainline (Stock cm kernel has limited support)
    • Modified Thermal Throttling temperatures for all devices so hopefully they won't get as hot
    • Exynos thermal exposed to sysfs
    • Android Logger disabled by default can be enabled over sysfs
    • WQ power efficient workqueues (Still need to apply in more places)
    • Frandom Support
    • Readahead bumped to 256 from 128

    Currently Disabled:
    GPU Voltage Control/GPU OverClock/UnderClock (Needs to be rewriten for the M driver)
    30
    Great news guys! Ril is fixed!!
    Turns out they made some changes to selinux on N... now selinux blocks services on init if they dont have a domain defined... and our selinux policy sucks... so the services were getting blocked by selinux...
    Everything is fine now... We have android 7.1.1 on our devices, and God it works soooo well... gonna leave it uploading when i go to bed and post it tomorrow!
    Cheers!
    29
    Camera error
    Bug camera black screen
    Not happening here...

    Status update guys! Booted cm14.1... sound is working, sensors are working...
    RIL is NOT working... camera is NOT working...
    progress... i love it...
    see screenshots below!
    26
    Hi guys! sry for my absence... I ve been working on the ril problem...
    I have some good news! Managed to find the problem with ril... I know how to make it work adbing the device...
    Now I need to find a permanent fix to ship it to you...
    I love progress...