• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

[8.1.0]Oxygen OS beta11 port for Z2_Plus

Status
Not open for further replies.

devabhi

Senior Member
May 12, 2018
82
346
53
Indore

Team Firangi Presents to you




Disclamer

As you people might know recently OnePlus released Open Beta 23/11 for the 5/5t which enabled the support for project treble on those devices. This ment that oxygen os finally had native support for treble for A only devices. What this means in a nutshell that this rom brings the newer ui and features from it and has made porting cross platform roms a lot simpler.


NOTE

->This is a alpha release and you'll find various bugs here and there, our team is working to fix them so please co-operate.
->Don't complain about lags and battery life project is still in alpha stage.
->Flash suncool and boost mod by @characteres


What is this?

It's oxygen os port for zuk z2. This is the latest Oreo version of oxygen os rom available. This port brings all the software feature oxygen os except for those required hardware such as nfc, etc.


Status :

Alpha


Bugs :

#Unable to save wifi network
Workaround:- Restore wifi backup from other rom
#Hal 1 camera apps dead
Workaround:- Use gcam mod
#No do not disturb mode due to alert slider absence.
Workaround :you can use airplane mode or just disable vibration from setting/sounds and lower volume.


Instructions :

Prerequisite : TWRP, Unlocked bootloader

IF you are using any TREBLE ROM:

-WIPE Dalvik/Art Cache, Cache, Sytem, Data, Vendor
-Reboot to recovery
-FLASH OOS ROM
-FLASH patch


IF you are using any NON-TREBLE ROM:

Refer this thread first


Downloads :

Rom:- Here
Patch:- Here

Wanna help me? Buy me a coffee :
paypal
paytm

Have a good day!

Please read before proceeding to installtion
Check the instructions.
Please check screenshot, most doubt will be cleared.
Its oxygen os, so it already has gapps.

Credits:
Art Chen
amog787
kenny3fcb for his kernel
10 Testers🙂

XDA:DevDB Information
Oxygen OS beta11 port for Z2_Plus, ROM for the Lenovo ZUK Z2 (Plus)

Contributors
devabhi, erfanoabdi, narshi shukla
Source Code: https://github.com/AOSiP-Devices/kernel_zuk_msm8996

ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Treble twrp
Based On: OOS

Version Information
Status: Alpha

Created 2018-07-11
Last Updated 2018-07-11
 

Attachments

Last edited:

thilak devraj

Elite Member
Jun 12, 2016
2,036
651
0
bangalore
oxygen os beta 11 review

so, everything basic is working. :good:
no problem in phone calls, data connectivity,
a lot more better in heat and battery management when compared to the older test builds
volte working
double tap to wake is working:)
three finger gesture working
navigation gestures working:D

some bugs (including the bugs stated in the op)

1. wi-fi problems as stated
2. stock camera as stated (gcam works perfectly)
3. brightness bug hasn't been solved yet, even after flashing the provided patch .. (lowest point will turn off the display)
4. screen wake up time is a little slow. (makes us think that fingerprint is slower, but its not)
5. as stated , face unlock registers the face but doesn't unlocks
6. the custom dpi settings in the display menu doesn't work properly (either its too big, or its very small, the mid point doesnt change anything at all)
7. the screen off gestures and fingerprint gestures aren't working
8. night mode and reading modes doesn't work
9. google contacts sync has some problems. doesn't seem to sync completely
10. the hot spot fails for the first time, but then after works fine

apart from these, im not gonna comment on battery life, smoothness and heat isues of the rom as it still is in alpha

but im happy to say that the dev made a significant improvement, because the battery life and smoothness are very much better than the test builds

as for the heat issue , the cooling solution like suncooling will work for the most of the part


these are just listing out what works and what not, and is no way an offence to the dev and his efforts, thanks @devabhi for the excellent port,

overall, pretty solid build for an alpha

checkout screenshots:D:D
 

Attachments

Nirmal0001

Senior Member
Jan 25, 2018
77
19
0
Installed as instructed but still device burn like hell and there are bug as post say alpa so not that I can complain just sad that facelock not working

---------- Post added at 08:30 PM ---------- Previous post was at 08:27 PM ----------

oxygen os beta 11 review

so, everything basic is working. :good:
no problem in phone calls, data connectivity,
a lot more better in heat and battery management when compared to the older test builds
volte working
double tap to wake is working:)
three finger gesture working
navigation gestures working:D

some bugs (including the bugs stated in the op)

1. wi-fi problems as stated
2. stock camera as stated (gcam works perfectly)
3. brightness bug hasn't been solved yet, even after flashing the provided patch .. (lowest point will turn off the display)
4. screen wake up time is a little slow. (makes us think that fingerprint is slower, but its not)
5. as stated , face unlock registers the face but doesn't unlocks
6. the custom dpi settings in the display menu doesn't work properly (either its too big, or its very small, the mid point doesnt change anything at all)
7. the screen off gestures and fingerprint gestures aren't working
8. night mode and reading modes doesn't work
9. google contacts sync has some problems. doesn't seem to sync completely
10. the hot spot fails for the first time, but then after works fine

apart from these, im not gonna comment on battery life, smoothness and heat isues of the rom as it still is in alpha

but im happy to say that the dev made a significant improvement, because the battery life and smoothness are very much better than the test builds

as for the heat issue , the cooling solution like suncooling will work for the most of the part


these are just listing out what works and what not, and is no way an offence to the dev and his efforts, thanks @devabhi for the excellent port,

overall, pretty solid build for an alpha

checkout screenshots:D:D
Same from me
 
Status
Not open for further replies.