◄[ROM][P600/1]►Hydronium ROM v2◄[4.4.2][July 10]►

[Illusive Man]

i was on [ROM][P600][P601][MagazineUX][V3] [Stable] UXProject Note 10.1 2014... am i must change to stock rom first before i flash this rom?

I came from the same ROM (MagazineUX v3). I just wiped and flashed Hydronium and it works fine. I have not had any issues at all, and the ROM is fast and lag free.

 

[vizvin]

Follow up -

I reflashed after going back to P600UEUCND2 (the last US KitKat firmware). No difference.

I guess I'll live without 802.11n for now. G seems stable, just slower.

What's the router you use? Make/Model?

 

[TBacker]

What's the router you use? Make/Model?

Asus RT-N66R, running WPA2-Personal, and the latest firmware.

This tablet was using 802.11n on this router for months while I was running Jellybean (CleanROM TW based rom).

I've also tried different pre-shared keys, and different channels.

I've also tried a different kernel (modified stock kernel).

I can see one other N-type wifi signal in the neighborhood when I scan with my phone, but the tablet doesn't show that either.

It's like the wifi N is completely disabled.

 

[vizvin]

Asus RT-N66R, running WPA2-Personal, and the latest firmware.

This tablet was using 802.11n on this router for months while I was running Jellybean (CleanROM TW based rom).

I've also tried different pre-shared keys, and different channels.

I've also tried a different kernel (modified stock kernel).

I can see one other N-type wifi signal in the neighborhood when I scan with my phone, but the tablet doesn't show that either.

It's like the wifi N is completely disabled.

Ahh ok. .I was pretty certain that fiddling with the control channels should work. Did you try all the lower channels?
If that doesn't work you can try this. You need root privs. Browse to /etc/wifi/ . Look for a couple of files that start with nvram_*. Edit those files and change a couple of the keys to the values mentioned below(please take a backup before changing them):
ccode=US
regrev=5
Save the file. Reboot and check if 5ghz is visible now.
If that too doesn't work then change those values to:
ccode=ALL
regrev=0
Again save,Reboot and check.

Cheers

 

[TBacker]

Ahh ok. .I was pretty certain that fiddling with the control channels should work. Did you try all the lower channels?
If that doesn't work you can try this. You need root privs. Browse to /etc/wifi/ . Look for a couple of files that start with nvram_*. Edit those files and change a couple of the keys to the values mentioned below(please take a backup before changing them):
ccode=US
regrev=5
Save the file. Reboot and check if 5ghz is visible now.
If that too doesn't work then change those values to:
ccode=ALL
regrev=0
Again save,Reboot and check.

Cheers

nvram_mfg was already set to ALL/0.

nvram_net was on GB/6.

I set both to US/5. We'll see when I get back home or into the office.

 

[TBacker]

nvram_mfg was already set to ALL/0.

nvram_net was on GB/6.

I set both to US/5. We'll see when I get back home or into the office.

802.11n is now working properly. Thanks for the help!

 

[ridicul0us]

hello, i'm facing a problem here with the multi window feature. the multi window dock won't pop out on touch wiz launcher even though the setting is turned on. My pen window manager and pen window launcher don't work as well.

can someone enlighten me? thank you in advance

 

[DocFreeDom]

Development is stopped here ? :/

 

[enmriley]

Follow up -

I reflashed after going back to P600UEUCND2 (the last US KitKat firmware). No difference.

I guess I'll live without 802.11n for now. G seems stable, just slower.

Would you post the stock P600UEUCND2 img file?

Thanks

 

[Vasishtha]

Hi,
Please correct me if I'm wrong but I've come across lag when I'm trying to resize a splitscreen window when I'm on a P600XXUCND3 stock/custom rom. The 2 seconds lag is only present when 3 or more apps are loaded in ram (not sure if it only happens with apps loaded via the right slide-in bar). I've followed your installation instructions to the letter as well.
When I'm on the P600ZTUCNE3 rom(Taiwan- June) the lag is gone, I don't know which other rom's do/don't have this issue but I do know P600XXUCND3 rom's have it.
I've also tested this on my cousin's note 2014 with your rom and the Taiwan rom, I get the same results.
I heavily rely on splitscreens to be productive and this lag hurts my flow.
I really like your styling and simplistic approach, keep up the awsome work!

Let me know if you can replicate this lag on your devices guys.
Thanks

-Vash

No one?

 

[greenlantern5]

Would you post the stock P600UEUCND2 img file?

Thanks

Here is the link..... http://forum.xda-developers.com/showthread.php?t=2729264

 

[enotar]

This rom is just fantastic. Thanks god I have P600.........Thank you for the greatwork

 

[Divine_Madcat]

Alright boys and girls.. i have cleaned up the thread. Just a friendly reminder ...
The devs who provide support for our devices do so on their own free time, and at their leisure. They are not here to cater to everyone's whim (unless they say they are, which has never happened for good reason), and should not be harassed or otherwise attacked. If you have a GENUINE problem with somebody; that is what I (and the other Mods on our team) are here to deal with. Please leave fighting and personal issues out of this (and any other thread).

Carry on...

 

[enotar]

Anybody have issues with Flipboard unlogin and closing what gives MagazineUX giving debug screen? Thank you

 

[micu999]

Anybody have issues with Flipboard unlogin and closing what gives MagazineUX giving debug screen? Thank you

Sorry cant help coz im using google now launcher + XGEL xposed setting, it's lightweight and smooth..

MagazineUX somehow not linking with flipboard and laggy.. But for the flipboard app i can login without no issue..

 

[arbit12]

Anybody have issues with Flipboard unlogin and closing what gives MagazineUX giving debug screen? Thank you

Yes, can report that Flip board keeps logging me out randomly. Need to log in again. Possibly a problem with Magazine UX?

 

[deV14nt]

Battery won't charge

I think I might need to go back to to stock again. Love the ROM but like others up thread it messed with by battery and charging. It won't charge at all while ROM is running. Detects charger but has a negative flow of current and shows up as discharging, using multiple 2A+ chargers. Percent goes from 5 to 1 in a minute. Jumps to 25% after dying and being turned on. It just ain't usable. Flashed stock in between and didn't have any problem. 1A+ positive current during use while charging. Also heard up thread flashing stock first would fix it, it did...until I reflashed this ROM. Tired of backups and reinstalls at this point.

 

[saj2001ind]

I think I might need to go back to to stock again. Love the ROM but like others up thread it messed with by battery and charging. It won't charge at all while ROM is running. Detects charger but has a negative flow of current and shows up as discharging, using multiple 2A+ chargers. Percent goes from 5 to 1 in a minute. Jumps to 25% after dying and being turned on. It just ain't usable. Flashed stock in between and didn't have any problem. 1A+ positive current during use while charging. Also heard up thread flashing stock first would fix it, it did...until I reflashed this ROM. Tired of backups and reinstalls at this point.

Why don't u try doing a factory reset from recovery and start from scratch

 

[enotar]

Yeah do that, ttust me this rom is incredible, long way ahead from stock. All is smooth and fast. Wouldnt go back to stick ever.

 

[deV14nt]

Why don't u try doing a factory reset from recovery and start from scratch

I've wiped system, data, cache, dalvik. Flashed the whole stock image (XAR ND2) in Odin a couple of times, repeating everything. I dunno. I've checked a couple of battery utilities and it jumps all over the place, from -1500 mA to +300 mA generally. But I guess not many people are having that problem and I don't have the patience to test any more, so I'll just leave it there. FlatUI looks awesome but stock isn't horrible I guess.