• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

&#9830;&#8710;&#9830;IllusionRom&#9830;&#8710;&#9830;[4.4.2][AK-ILL][4.8.3][Own UI]

Do you like IllusionRom


  • Total voters
    149
Status
Not open for further replies.

AndrolinRoot

Elite Member
Apr 7, 2012
2,149
2,891
0
>>>>Ansbach<<<<
carbonrom.ca.ohost.de


Code:
#include 
/*
* Your warranty is  void after flashing.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/

WWW.ILLUSIONROMS.COM
•●IllusionRom is an aftermarket firmware based on the Android Open Source Project.•●



Features​

>>Google Base // Rooted //AK CUSTOM KERNEL
>>[KOT49E
>>Uses Custom 4.8 GCC toolchain based off of SaberMod
>>Uses Custom 4.7 GCC arm-eabi for kernel
>>FULL -O3 ROM
>>Omni Performance Control
>>Advance Reboot Menu
>>Compatibile with Xposed Settings
>>Black Themed
>>Embedded Superuser
>>IllusionSettings (Utool)
>>Active Display
>>Multi-Rom patched in kernel
>>SMS enabled - deb
>>AOSP-like
>>Custom-built kernel instead of the prebuilt
>>% battery bar
>>Privacy Guard
>>Tweaked Device Trees
>>BIONIC BEATS
>>Init.d Support
>>Busybox Built-In
>>Battery Around Unlock Ring
>>Custom Pulse Notification Light Settings
>>Optimization that would make you think you're on cocaine (drugs are bad!)
HALO modded
OWN UI (HOLO LIGHT)
Network speed in Statusbar
Device Settings

... A lot more to come from the team


Comming Soon :

>>Navbar
>>QS
..

XDA:DevDB Information
IllusionRom Mako, a ROM for the Google Nexus 4

Contributors
AndrolinRoot, AK , showp-1984
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Root, Custom Recovery,
Based On: AOSP

Version Information
Status: Beta
Current Beta Version: B1-M
Beta Release Date: 2013-12-11

Created 2013-12-11
Last Updated 2014-01-19
 

AndrolinRoot

Elite Member
Apr 7, 2012
2,149
2,891
0
>>>>Ansbach<<<<
carbonrom.ca.ohost.de
Last edited:

ak

Elite Member
Feb 19, 2011
14,849
69,622
0
Ak Land Valley
ak.hiddenbytes.org
KERNEL SOURCE CODE

Link: AK-Illusion

AK FEATURES

+ Latest Google Source
+ Linux 3.4.72+
+ Linaro toolchain
+ Linaro Fixes
+ -Os
+ multirom support
+ super stripped
+ fast charge
+ blx

+ ondemand
+ interactive
+ conservative
+ performance

+mpd

+ deadline
+ cfq
+ noop

+ readahead 256/16
+ lmk optimizations
+ dynamic fsync

+ qualcomm thermal enhanced

+ gamma control
+ halfbreed calibration

+ sound control

+ voltages control
+ disabled boost voltages -25mv for all chips

+ codel net scheduler

+ s2w
+ s2s
+ dt2w
+ dt2w with s2s
+ power button battery saver (disable 2w operations if enabled)

+ gpu ondemand
+ gpu performance

Q: If the 192mhz and 304mhz steps use the same undervolt settings, how can 192mhz use less power?
thanks to @thracemerin:
A: The formula for power consumption is: P = f * c * V ^ 2
Where: P = power consumption, f = frequency, c = capacitance and V = voltage
So: since c is constant in this case, and we'll assume you've used the lowest UV possible (600mV)
At 304mhz: P = 304 * c * 600 ^ 2
At 192mhz: P = 192 * c * 600 ^ 2
This means that 304mhz uses approximately 1.58 times more power than 192mhz over the same time.

Q: How i can change GPU governor via sysfs?
thanks to @myfluxi:
echo "conservative" > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/pwrscale/policy
echo "trustzone" > /sys/devices/platform/kgsl-3d0.0/kgsl/kgsl-3d0/pwrscale/policy

Q: How i can enable s2w/s2s/dt2w via sysfs?

thanks to @ak:
Legend:
/sys/android_touch/
-rw-r--r-- root root 4096 2013-11-27 11:27 doubletap2wake
-rw-r--r-- root root 4096 2013-11-27 11:25 doubletap2wake_version
-rw-r--r-- root root 4096 2013-11-27 11:25 s2w_s2sonly
-rw-r--r-- root root 4096 2013-11-27 11:27 sweep2wake
-rw-r--r-- root root 4096 2013-11-27 11:25 sweep2wake_version

Nb:
Please do not use s2w/s2s with dt2w at the same time.

- for have only S2S
echo 2 > /sys/android_touch/sweep2wake

- for have only S2w
echo 1 > /sys/android_touch/sweep2wake

- for have only dt2w
echo 1 > /sys/android_touch/doubletap2wake

- eco mode option s2s/s2w/dt2w
with this feature you can enable an option for save battery.
/sys/module/input_core/parameters/pwrkey_suspend pwrkey_suspend = Y or N
if yes when screen goes off without touch anything 2w is enabled otherwise if you use power button is disabled.
You can save your battery with this option on.

Q: What is the idle drain when enabling 2w?
thanks to @ak:
+2% then normal

VIDEO REVIEW AK NEXUS 4


Thanks a lot:
outofbit.it

VIDEO REVIEW SWEEP2WAKE N4


Thanks a lot:
@shop1984

VIDEO REVIEW DOUBLETAB2WAKE N4


Thanks a lot:
@shop1984
 
Last edited:

Tak3r07

Senior Member
Jan 11, 2010
816
195
0
Finally a release :) Thank you very much.. As expected, ak(kernel) is the way to go?

Gesendet von meinem Nexus 4 mit Tapatalk
 

Hubaqu

Senior Member
Feb 24, 2012
183
72
0
Madeira
In illusion settings there's no options on general ui tab only on active display... Are u thinking about adding features? BTW excellent ROM and excellent kernel thank you both! :thumbup:

Sent from my Nexus 4
 
Status
Not open for further replies.