Hi i have a canadian variant a03s it got some water damage wont charge but when i push power and vol down it flashes the samsung logo i tried charging it with wall block and cord when i plug it into the computer it doesnt turn on or register that the computer recognizes it however when i have plugged into the computer hold vol down and power i get an error message pop up telling me the device needs more power any solutions?
A03s no power
- Thread starter daveyboy180
- Start date
watch youtube disassembly videos how to open backcover (carefully!) use the right tools. disconnect battery and clean pcb boards with isopropanol.
let it dry in sun or in oven at 50 °C degree celsius (make sure no plastic parts get molten, place it on glass side with less contact as possible).
if any pcb board looks like this it must replaced.
let it dry in sun or in oven at 50 °C degree celsius (make sure no plastic parts get molten, place it on glass side with less contact as possible).
if any pcb board looks like this it must replaced.
so i got power to it but im getting an error after recovery mode boot it restartrs with factory reset and try again says android cant load data might be corrupt if is there a way to reflash without losing data?
you can flash BL + AP + CP + HOME_CSC without wiping data, but most likely the result is the same.
Similar threads
- Sticky
