[A40][S][V1.7][AROMA][DeX-Kernel]OneUI4.1 Ported from Galaxy S10e [EOL]

[szucsy92]

How to make it safetynet pass? I installed magisk latest, i hide it, enablet zigysk and forced the list. No ramdisk!! Installed the safetynet fix latest. But not passed for me.

 

[gessiko]

Ah cool good to hear! Thanks for your Report. I have no idea why it cause it on some devices but its fixable. Samsung be like... Or maybe it is a special firmware variant was not allowing it.

@kevios12

Maybe

 

[kevios12]

Unfortunately, I cannot confirm that safetynet is not fixed with root. With me it worked. Otherwise I wouldn't share it. And about the U4 bootloader, I have no control over that.

 

[szucsy92]

Unfortunately, I cannot confirm that safetynet is not fixed with root. With me it worked. Otherwise I wouldn't share it. And about the U4 bootloader, I have no control over that.

Hy! Now cts profile passed with magisk hide props in the description! For first i faced long press power button no hapening. Double tap open the camera, single press lock down and wake up but no longpress reaction. Solve it in settings>side key funktions>(select power menü) default bixby button enabled.
REBOOT!
Cant reboot normaly. Must evry reboot make from twrp and wipe cache/dalvic cache. Without this step i got bootloop.
Charging!
When i pluging the cable factory reboot in half minute. >> Bootloop.
Every reboot i must make a cache wipeing from TWRP. But charging is fine when plugged and wipe cache in TWRP and reboot.

 

[gessiko]

@kevios12

The thing I noticed is that in biometric security only the fingerprint works, and face recognition does not. it does not work. Why?

 

[kevios12]

Hy! Now cts profile passed with magisk hide props in the description! For first i faced long press power button no hapening. Double tap open the camera, single press lock down and wake up but no longpress reaction. Solve it in settings>side key funktions>(select power menü) default bixby button enabled.
REBOOT!
Cant reboot normaly. Must evry reboot make from twrp and wipe cache/dalvic cache. Without this step i got bootloop.
Charging!
When i pluging the cable factory reboot in half minute. >> Bootloop.
Every reboot i must make a cache wipeing from TWRP. But charging is fine when plugged and wipe cache in TWRP and reboot.

Thats is typical HighEnd device Feature u have to Press vol- + power key to access Power Menu is not a bug hehe and Bootloop Problem is in v1.7 Fixed. No Probs.

 

[kevios12]

@kevios12

The thing I noticed is that in biometric security only the fingerprint works, and face recognition does not. it does not work. Why?

As u can read in Bugs, FaceUnlock is never Working. We are tried already to fix Faceunlock without succsess. The software is binded at some Files on the main device and if not exists. Breaks. Also this are some Sepolicy Problems i guess. We cannot decompile it. Its not a custom ROM etc. XD

 

[szucsy92]

Thats is typical HighEnd device Feature u have to Press vol- + power key to access Power Menu is not a bug hehe and Bootloop Problem is in v1.7 Fixed. No Probs.

I am on this version and bootloop is here. Without wipeing cache/dalvik cache i hang on boot logo.. AOD feature when its ON and early from lockscreen working but force reboot and loop. When i plugged the charger (aod charging animation is runing) in half minute force reboot and loop. :/
How to make a log from this? :[

 

[xinek]

@szucsy92
I recommend installing crdroid 8.2 and waiting for new roms, in my opinion it is the most stable custom rom for this phone and it works with u4 without any problems.

 

[xinek]

@kevios12
when are you planning to create a new normal custom rom for our phone without port?

 

[kevios12]

View attachment 5664201 I am on this version and bootloop is here. Without wipeing cache/dalvik cache i hang on boot logo.. AOD feature when its ON and early from lockscreen working but force reboot and loop. When i plugged the charger (aod charging animation is runing) in half minute force reboot and loop. :/
How to make a log from this? :[

Turn off your AOD it wont reboot then anymore.

 

[Alex2233]

View attachment 5642669
/*
* I am not responsible if flashing this rom bricks your phone or causes thermonuclear war
* and ends the world as we know it.
* You have been warned.
*/

Make always a Backup of your Phone.

!!DO NOT USE THIS AS BASE WITHOUT MY PERMISSION!!

• Based on S10e (DBT FW) G970FXXSFHVF1
• June Security Patch 2022
• OneUI 4.1 - Android 12 (S)
• Eureka R10.0 Permissive - 4.4.302-DeX
Custom DTB (Stable)
• Debloated (Apps,permissions,framework,unnecessary features removed)
• S10e Wallpapers
• Disabled FRP Unlock toggle
• Side Key Functions
• Edge Lightning
• Themes & Wallpapers
• All Original Features (Wifi, bluetooth,voLTE, voWiFi)
• Dolby Atmos
• Spotify Alarm
• Audio, Battery, Graphics Tweaks
• Smooth scrolling
• Not Rooted
• DEX over WiFi + USB (Full Supported)
• DeKnoxed
• RAM Plus 2/4GB
• Additional Bloat in AROMA selectable
• Dual Speaker MOD
• Stock Samsung Camera with many Modi
• Disabled DFVS Thermal Trottle

• Chrome Playback (audio from Speaker only sounds like a old TV)
* [Workaround: Use APPS or just another browser like Firefox ]
#
Buggy but don't ask for fix, will neva!
• FaceUnlock
• AOD (Works only from lockscreen)
• SafetyNet only with ROOT
Note: If u face laggs, Android 12 is for 6GB+ RAM and i am giving my best
to optimize it! If u get instand constants heating issues, do a clean flash!
#
#
Using Phone while charging can cause high temps & maybe freeze
If u found more bugs, send me always with Logs an report!

View attachment 5642703

Its almost the same Installer as from Note 10 Port!

View attachment 5642679View attachment 5642681View attachment 5642683View attachment 5642687View attachment 5642689View attachment 5642685

• See next Post!

• See next Post!

• Download ROM
• Flash ROM Zip
• Reboot

Pass via ROOT Possible, steps below

Spoiler: ROOT Guide SafetyNet

ROOT with Latest Magisk
• Download both .zip in Attachment
• Enable in Magisk > Settings > Zygisk and Denylist
• Flash one by one from Attachment via Magisk > Module > Install from Storage
• Download Terminal from PlayStore
• Terminal type: 1. su, 2. props, 3. type 1, 4. type f, 5. select your fingerprint (example: S10 Lite), 6. Type y, 7. Type y (it will reboot)
8. Check SafetyNet Status via YASNAC (PlayStore)
• For Banking APPS if u pass both: Magisk > Zygisk > configure Denylist > Select your APPS > reboot.

Download - Google Drive v1.7
Download - AFH (AndroidFileHost)

Troubleshooting
• if u get a Blackscreen after Flash the ZIP, try reflash Stock ROM
• first before doing all again. [Confirmed R Firmware works/Q untested yet]

Misc Links
Kernel Source: Eureka
Telegram: A40 Group
Telegram: New Support Group!

Credits
@alexandrusemina8 ##$ [TESTER]
@Chatur27 [KERNEL]
@neel0210 [Vendor PRO! HELPED VERY MUCH!]
@Royna THX For Making DeX Support in our Eureka Kernel
@Gabriel260BR for all other Helping!

if i forgot someone, pn me!
If u want to Support me, feel free!

View attachment 5642691

Contributors
@kevios12, @neel0210

ROM Information
Source Code: See Misc links
ROM OS Version: Android 12
ROM Kernel: Linux 4.4.302-p4-DeX
ROM Firmware Required: latest
Based On: OneUI 4.1

Version Information
Status: Stable
Current Stable Version: 1.7
Release Date: 2022-06-21

Created 2022-06-21
Last Updated 2022-06-29​

Hello! I would have a stupid question, can the custom rom run on an a33 5g? just out of curiosity, and if you can, if you can explain how, Good day!

 

[kevios12]

Hello! I would have a stupid question, can the custom rom run on an a33 5g? just out of curiosity, and if you can, if you can explain how, Good day!

Hi, no sorry. It's only for this device!

 

[szucsy92]

View attachment 5664201 I am on this version and bootloop is here. Without wipeing cache/dalvik cache i hang on boot logo.. AOD feature when its ON and early from lockscreen working but force reboot and loop. When i plugged the charger (aod charging animation is runing) in half minute force reboot and loop. :/
How to make a log from this? :[

(U4)
S10e v1.7 onli work with Eureka_R9.2_A405_AOSP-HMP with this combo.
-Custom install
-Selinux enforce
-"stability V1"
gps is not working. No gps signal no gps accuracyon.
AOD tap for the notification work great!
Not working mobile hotspot.
Working BT media audio.
Can take it safetynet fixed cts profile passed.
Can u make n U4 version from this port?

 

[kevios12]

(U4)
S10e v1.7 onli work with Eureka_R9.2_A405_AOSP-HMP with this combo.
-Custom install
-Selinux enforce
-"stability V1"
gps is not working. No gps signal no gps accuracyon.
AOD tap for the notification work great!
Not working mobile hotspot.
Working BT media audio.
Can take it safetynet fixed cts profile passed.
Can u make n U4 version from this port?

i told some post before if you guys reading a bit. Enforcing kernel is not working! Only Permissive!

 

[szucsy92]

i told some post before if you guys reading a bit. Enforcing kernel is not working! Only Permissive!

Thx!

 

[Mr. Askhat]

@kevios12 did you tried fix audio issue?

 

[Patricknet568]

Next bug, telephoning is absolutely not possible, the function only runs over 3G 4G is not available at all!

 

[szucsy92]

Next bug, telephoning is absolutely not possible, the function only runs over 3G 4G is not available at all!

You installed the spectrum enabler zip from your internal storage? Whit this (specrtum enabler R7.5) working everything except gps (gps on the way... gps point is work)

 

[Patricknet568]

I have not enable.zip ?? Cane you my the Link Post?