AAWireless - General discussion and support

[krzyb]

I would also like to get the 2.1 beta version; KIA updated to the panoramic version.
My device ID is AAWireless-wDa0aa67

 

[pancher.hu]

First thing to try is passthrough mode. If the same thing happens in passthrough mode it can either be a device defect or HU issue.

Hi Snirpo,

thanks for the quick answer. I needed some time for the test, but finally made another extensive test. First with the settings I had (+passtrough mode), later with different modifications.
The reason it took long was the first try. I changed to passtrough and I believe that time I had no (or maybe 1) disconnetcion.
Later there was one more case with only 1 disconnection.
But the complete picture has not changed.
I usually drive 2x 40-50 min per day on the motorway. There were in avg 5-8 disconnections.
If I go to the city, the frequency of disconnections are even getting higher.

How could I test weather it is the HU or the dongle?
In the weekend I might have the chance to test it in another car for 2-3 hours.

 

[Snirpo]

I do ask for beta too
AAWD8bUcnGd

Enabled for everyone who requested it

 

[Snirpo]

@Snirpo
Is it normal, when i visit the firebase link I do have 2 options, but when I click on DEV it goes to the all releases tab?

Dev is the new one, the other will not be updated anymore. Firebase app is a bit buggy, you first need to accept the invite, should be in your mailbox.

 

[Snirpo]

Hi Snirpo,

thanks for the quick answer. I needed some time for the test, but finally made another extensive test. First with the settings I had (+passtrough mode), later with different modifications.
The reason it took long was the first try. I changed to passtrough and I believe that time I had no (or maybe 1) disconnetcion.
Later there was one more case with only 1 disconnection.
But the complete picture has not changed.
I usually drive 2x 40-50 min per day on the motorway. There were in avg 5-8 disconnections.
If I go to the city, the frequency of disconnections are even getting higher.

How could I test weather it is the HU or the dongle?
In the weekend I might have the chance to test it in another car for 2-3 hours.

If the same happens in another car, I'd say send an a support request at [email protected] for a replacement.

 

[Snirpo]

Yeah it fixes the connectivity issue. But it takes a whole lot longer to connect to AAW - at least in my case.

I think the problem is the car turning on the USB port when you walk to the car. Device (AA) will start up too soon and will time out because there's no reaction from the HU yet.
In normal (non-passthrough) mode we keep the wireless side alive by pinging to the phone. So AA will not time out.
This has changed in 2.1.0, we don't ping anymore in both normal and passthrough mode. If this has negative side effects, please tell me

However... dongle mode should also fix this, because it makes AA wait for the handsfree connection of the car to the phone.

 

[zhasil]

I do ask for beta. Thanks.

AAWireless-gSao63ZI

 

[elbubi]

@Snirpo

May I have 2.1.0 enabled too?
Trying to get rid of audio chopping and would be nice to test with latest version.

AndroidAuto-AAW0BFP6ObA

Thanks in advance!

 

[DeCo59]

Oh me too if i can AAWireless-SUsVhcKV

Also I have one behaviour now, for exemple I like switch between poweramp, deezer and also smart audiobook, and I use waze as gps
But now for exemple if I use deezer, it go at the bottom bar with the control button, and if I switch on android auto to poweramp, deezer still stay at the bottom bar, so if I want to switch song with the "next" button on my car wheel , it stop poweramp and next the song on deezer

I hope I was clear, so now I disabled deezer and I only use poweramp but I can't understand why it do this

Thanks in advance for the help, or informations

 

[kb_79]

What are the improvements in the version mentioned 2.1.0? Thank

 

[HoTsHoT89]

I've noticed that connection takes far longer in 2.0.2 than 2.0.1. It will take up to 50 seconds whereas previously would take about 10.

AAWireless would double blink blue, then change to red. This would happen a few times then it would connect.

Will the 2.1.0 beta fix this, or is it possible to rollback to 2.0.1.

 

[Rom4egT]

I'd like to test 2.1.0
ETcqEikv
Thanks.

 

[nevar100]

I do ask for beta. Thanks.

AAWidxtV5Sq

 

[fmotta61]

@Snirpo thanks.
But I had to reset my AAW thus changing ID.
The new one is AAWireless-8BZKazDK
Could you please enable this too?
Regards

 

[Whiskery]

Would be grateful for the beta version. MG ZS EV 2022.
AAWIqcbn3Rv
Thanks!

 

[RemedyMTB]

@Snirpo

I'd love to test 2.1.0 too!
Device name: AndroidAuto-AAWuSMCUleL
Car: Opel Astra 2016

Thanks!

 

[Gambosino]

@Snirpo

I'd love to test 2.1.0
Device name: AndroidAuto-AAWnkP7N5T4
Car: Hyundai ioniq
HU: LG gen5W
Phone: Xiaomi x3 pro

Thanks!

 

[laufferb]

Also would like to get the 2.1 beta.
My device ID is AAWireless-wqhNeLB7

 

[Deleted member 10362463]

When will 2.1.0 firmware will be released i don't want to use aawireless in non passthrough on my hyundai. So eagerly waiting for 2.1.0 update to stable channel. @Snirpo @Emil Borconi

 

[krzyb]

I would also like to get the 2.1 beta version; KIA updated to the panoramic version.
My device ID is AAWireless-wDa0aa67

Despite the request, I did not receive the 2.1 beta. Maybe I don't know how to get to her? Should it appear as a standard system update?