[ABANDONED][ROM][ALPHA][13][OFFICIAL][CEPHEUS] EVOLUTION-X Tiramisu 7.0 [08/19/2022]

Search This thread

LoganDeveloper

Senior Member
May 25, 2016
409
420
Xiaomi Mi 9



IvlZLyc.png


Evolution X 7.0 for the Xiaomi Mi 9 [Cepheus]

Code:
/*

* Your warranty is void. Or valid, probably?

*

* I am not responsible for bricked devices, dead SD cards, Ebolation X,

* thermonuclear war, or the current economic crisis caused by you following

* these directions. YOU are choosing to make these modificiations, and if

* you point your finger at me for messing up your device, I will LMAO at you.

*/



0KUV8YX.png


Living, Breaking, Keep Evolving.

Pixel UI, customization and more, we are Evolution X!


- Team Evolution X -

@joeyhuab

@peaktogoo (Now RealAkito)



Reach us on Twitter! @EvolutionXROM





SRQCjQJ.png




It's a basic build, the evolver is not there yet



CIrL2gb.png

- Everything is still fresh, there might be more issues than expected
- Fingerprint (UDFPS) and screenshots are broken

DO NOT FLASH GAPPS, ALREADY INCLUDED



o2G52Ve.png

First Time Install / Clean Flash
0. Unlock your bootloader
1. Download the proper flashable ZIP for your device
2. Download our recovery (the others are not compatible)
3. Reboot fastboot
4. Flash the recovery using the command fastboot flash recovery pathToRecovery.img
5. Reboot recovery
6. Wipe Data/Cache/System
7. Flash the ROM
8. Reboot System and #KeepEvolving



Update / Dirty Flash
Easy way:
1. Open the OTA updater app (Settings->System->System updates)
2.Start downloading the new build
3. Press the install button that appears when the download is complete
4. Let the device rebooting and installing the update
5. It reboots automatically at the end of the installation

Manual way
1. Download the proper flashable ZIP for your device
2. Reboot to Recovery
3. Flash the ROM
4. Wipe cache
5. Reboot System and #KeepEvolving



And what if I want to keep TWRP/Orange fox ?


/!\ We use a modified partitions scheme, so you must use our own recovery, or you'll get an error during the installation process /!\



How to flash a zip file using EvoX recovery ?
1. That's pretty simple. In recovery go to Apply update -> Apply from ADB
2. On your computer, use the command adb sideload pathToZipFile to flash the zip
If the percentage stucks, don't panic, just wait a few minutes until the process finish
3. If a message says "Signature verification failed", It means that you're trying to flash something else than my EvoX builds. Clic "yes" only If you know what you're doing
4. You can wipe cache in Factory reset -> Format cache partition



You want Magisk ? No problem
1. After clean/dirty flashing the rom, Patch boot image from Magisk app (You can find it in the rom zip file)
Uncheck the "Patch vbmeta in boot image" option
2. Copy the patched boot image on your computer
3. Reboot to fastboot
4. On your computer, use the command fastboot flash boot pathToPatchedBootImage
5. Reboot system and #KeepEvolving









Download

Device Support / Official Chat / Donate to me





S2t0kJ9.png
 
Last edited:

LoganDeveloper

Senior Member
May 25, 2016
409
420
Xiaomi Mi 9
Changelog for latest build (08/19/2022)

Hello everyone 👋
Today I'm releasing the first build of EvoX 7.0, based on Android 13.
Please note that it's an alpha. Many features are missing, and it may be a little bit buggy.


Do not dirty flash from an earlier Android version. The best is to clean flash.

Please do a clean flash and use default kernel (Soviet) before reporting any issue.


=========================================
Device changes:

- Minimal changes for being able to boot Android 13
- Switch to file based encryption
- Switch to f2fs for cache partition
- Switch completely to f2fs for userdata partition
- Switch to erofs for system partitions
=========================================
Rom changes:

- Initial Android 13 build

Download
EvoX recovery
Post Soviet kernel
 
Last edited:

pipes80

Senior Member
Aug 6, 2018
83
9
Xiaomi Mi 9

Top Liked Posts

  • There are no posts matching your filters.
  • 11
    Because my Mi 9 totally died and I don't have much time anymore for making new builds, I'm stopping to maintain EvoX for Mi 9

    Goodbye Mi 9 community
    Best wishes for the future !
    2
    Hi 2 all.
    I flash according to the instructions with the recommended recovery and the current platform-tools, and at the end of the process I get the error: "can not find payload_properties.txt". Has anyone encountered this error and how was it fixed? Thanks
    I'm flashing like this:
    fastboot wipe-super super_empty.img
    fastboot flash recovery <recoveryname.img>
    fastboot boot <recoveryname.img>
    Format data with Factory Reset > Format data/factory reset (and format system too)
    Sideload the zip with Apply Update > Apply from ADB, and do: adb sideload <ROM zip file>
    You can ignore it
    2
    Wow, booted fine, works fine, thanks a ton.
    2
    I took the file from LOS when upgrading to 12.1 retrofit. Just to see what will happen.
    And I flashed the rom with and without a file. Flashed from LOS Android OS 12.1 and from MIUI Android OS 11. The result is the same everywhere
    But if you follow the OP, you won't face any issues.

    This ROM does not need super_empty.img, in fact, Logan makes it easy for users.

    The required file: EvoX recovery

    1. flash evoX recovery, and boot into recovery
    2. erase anything that recovery provided (cache, data, system)
    3. adb sideload the rom zip
    4. reboot and you are good to go.
    1
    What rom did you switch to EvoX 7 from?
    PE 12plus
  • 11
    Because my Mi 9 totally died and I don't have much time anymore for making new builds, I'm stopping to maintain EvoX for Mi 9

    Goodbye Mi 9 community
    Best wishes for the future !
    8



    IvlZLyc.png


    Evolution X 7.0 for the Xiaomi Mi 9 [Cepheus]

    Code:
    /*
    
    * Your warranty is void. Or valid, probably?
    
    *
    
    * I am not responsible for bricked devices, dead SD cards, Ebolation X,
    
    * thermonuclear war, or the current economic crisis caused by you following
    
    * these directions. YOU are choosing to make these modificiations, and if
    
    * you point your finger at me for messing up your device, I will LMAO at you.
    
    */



    0KUV8YX.png


    Living, Breaking, Keep Evolving.

    Pixel UI, customization and more, we are Evolution X!


    - Team Evolution X -

    @joeyhuab

    @peaktogoo (Now RealAkito)



    Reach us on Twitter! @EvolutionXROM





    SRQCjQJ.png




    It's a basic build, the evolver is not there yet



    CIrL2gb.png

    - Everything is still fresh, there might be more issues than expected
    - Fingerprint (UDFPS) and screenshots are broken

    DO NOT FLASH GAPPS, ALREADY INCLUDED



    o2G52Ve.png

    First Time Install / Clean Flash
    0. Unlock your bootloader
    1. Download the proper flashable ZIP for your device
    2. Download our recovery (the others are not compatible)
    3. Reboot fastboot
    4. Flash the recovery using the command fastboot flash recovery pathToRecovery.img
    5. Reboot recovery
    6. Wipe Data/Cache/System
    7. Flash the ROM
    8. Reboot System and #KeepEvolving



    Update / Dirty Flash
    Easy way:
    1. Open the OTA updater app (Settings->System->System updates)
    2.Start downloading the new build
    3. Press the install button that appears when the download is complete
    4. Let the device rebooting and installing the update
    5. It reboots automatically at the end of the installation

    Manual way
    1. Download the proper flashable ZIP for your device
    2. Reboot to Recovery
    3. Flash the ROM
    4. Wipe cache
    5. Reboot System and #KeepEvolving



    And what if I want to keep TWRP/Orange fox ?


    /!\ We use a modified partitions scheme, so you must use our own recovery, or you'll get an error during the installation process /!\



    How to flash a zip file using EvoX recovery ?
    1. That's pretty simple. In recovery go to Apply update -> Apply from ADB
    2. On your computer, use the command adb sideload pathToZipFile to flash the zip
    If the percentage stucks, don't panic, just wait a few minutes until the process finish
    3. If a message says "Signature verification failed", It means that you're trying to flash something else than my EvoX builds. Clic "yes" only If you know what you're doing
    4. You can wipe cache in Factory reset -> Format cache partition



    You want Magisk ? No problem
    1. After clean/dirty flashing the rom, Patch boot image from Magisk app (You can find it in the rom zip file)
    Uncheck the "Patch vbmeta in boot image" option
    2. Copy the patched boot image on your computer
    3. Reboot to fastboot
    4. On your computer, use the command fastboot flash boot pathToPatchedBootImage
    5. Reboot system and #KeepEvolving









    Download

    Device Support / Official Chat / Donate to me





    S2t0kJ9.png
    8
    Changelog for latest build (08/19/2022)

    Hello everyone 👋
    Today I'm releasing the first build of EvoX 7.0, based on Android 13.
    Please note that it's an alpha. Many features are missing, and it may be a little bit buggy.


    Do not dirty flash from an earlier Android version. The best is to clean flash.

    Please do a clean flash and use default kernel (Soviet) before reporting any issue.


    =========================================
    Device changes:

    - Minimal changes for being able to boot Android 13
    - Switch to file based encryption
    - Switch to f2fs for cache partition
    - Switch completely to f2fs for userdata partition
    - Switch to erofs for system partitions
    =========================================
    Rom changes:

    - Initial Android 13 build

    Download
    EvoX recovery
    Post Soviet kernel
    4
    Hi @LoganDeveloper, I use your trees to build TWRP retrofit version, and so far works well on your ROMs (At least tested by me). can I release it for anyone to test it?

    TWRP Device trees: https://github.com/JoK3rLeE/android_device_xiaomi_cepheus-twrp
    Sure, you can release it. I know many people prefere using twrp than Evox recovery, so it would be great to have it
    3
    I installed this rom through adb sideload it gave an error "Signature verification failed" but I continued until the end and it installed completely, good battery, stable, good sound, the finger print in my case doesn't work, I'm enjoying this rom so far, I hope let this information be an incentive for the Dev. keep this rom with updates, good work.
    I'm aware of fingerprint problem, I'll release a new build when it'll be ready with working fingerprint scanner, the evolver, ...