*ABANDONED* [ROM][OOS10][11.0] PE for Nord N10 [UNOFFICIAL]

[stoag]

I know OP is not doing version updates but I understood they support the phone with security updates though Oct 2022.

PE (unofficial) works great on this phone! The last update did have some nfc issues but I understand they are being worked on. I'm eagerly (and patiently) awaiting there next unofficial PE update.

Disregard. Getting official and unofficial pages confused. My mistake.

 

[0FIMA0]

Hi guys!Stucked with some problem.Whatever all Im do,it was go back to bootloader,and dont come more 47% percent's.All ending of update same,or Like on photo,or 1.0 xfer,but phone reboot into bootloader.Maybe I do some mistakes with slot b/a?Or someone knew ,what issues happened

 

[Spidermonkeyj75]

Hi guys!Stucked with some problem.Whatever all Im do,it was go back to bootloader,and dont come more 47% percent's.All ending of update same,or Like on photo,or 1.0 xfer,but phone reboot into bootloader.Maybe I do some mistakes with slot b/a?Or someone knew ,what issues happened

That is where it ends. Just reboot device system after the command screen completes the operation/sideload.

 

[0FIMA0]

Guys,need advice,what version of firmware Im need to flash Pixel Experience Rom?Im trying few ways,but or my handset just reboot into fastboot or view for me this msg(flashed from Android Q)

 

[0FIMA0]

Guys, need advice or help.Im stucked.Im try to flash Pixel,from Android Q,but phone stucked.What version of firmware I'm need to flash Pixel Rom,and dont create from my phone "brick" again?
Handset is Billie8t version (T-Mobile), bootloader of course unlocked

 

[stoag]

Guys, need advice or help.Im stucked.Im try to flash Pixel,from Android Q,but phone stucked.What version of firmware I'm need to flash Pixel Rom,and dont create from my phone "brick" again?
Handset is Billie8t version (T-Mobile), bootloader of course unlocked

Is it giving you that crashdump error every time you reboot?

OnePlus has factory images available on their support site. Just make sure your firmware matches.

Software Upgrade - OnePlus.com

Get the latest OxygenOS updates for your device.OxygenOS is always evolving. Learn about the latest features and improvements, and get even more out of your device.

www.oneplus.com

There's also an unbrick guide here.

[OPN105G][OOS 86AA/89BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...

forum.xda-developers.com

 

[0FIMA0]

Is it giving you that crashdump error every time you reboot?

OnePlus has factory images available on their support site. Just make sure your firmware matches.

Software Upgrade - OnePlus.com

Get the latest OxygenOS updates for your device.OxygenOS is always evolving. Learn about the latest features and improvements, and get even more out of your device.

www.oneplus.com

There's also an unbrick guide here.

[OPN105G][OOS 86AA/89BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...

forum.xda-developers.com

No.when Im try to flash,from 11 Android, phone has not crashdump,just reboot into fastboot.

 

[boffster99]

No.when Im try to flash,from 11 Android, phone has not crashdump,just reboot into fastboot.

chances are you need to flash the copy partition zip after you flash the PE zip. Both by adb sideload. I was getting the same result until I realized there is a a/b issue with partitioning. I pulled the copy partition zip from the lineage os web site. should be able to find it by searching in that website. (https://www.androidfilehost.com/?fid=2188818919693768129)

 

[0FIMA0]

chances are you need to flash the copy partition zip after you flash the PE zip. Both by adb sideload. I was getting the same result until I realized there is a a/b issue with partitioning. I pulled the copy partition zip from the lineage os web site. should be able to find it by searching in that website. (https://www.androidfilehost.com/?fid=2188818919693768129)

Im tried to do this way.Also Im started to try using another recovery like TWRP.Of course it works,and flashing but partition issue still staying with me.Im upload PE on Android 11,Oxygen OS last update.Shall I try to install up on Android 10 firmware?

 

[boffster99]

Yes MsM back to os 10, unlock bootloader, flash recovery, factory reset in recovery, then adb sideload PE zip then after that adb sideload partition zip

 

[ninjasinabag]

Yes MsM back to os 10, unlock bootloader, flash recovery, factory reset in recovery, then adb sideload PE zip then after that adb sideload partition zip

Flash rom and partition fix to slot A, flash rom again to slot B.
Only way it seems I can get any rom working. Thank you for the partition package. Major life saver.

 

[nomadicdev]

works slick when you can get it installed
really important to use:

fastboot boot recovery.img
then adb sideload rom.zip

which I think this works better than trying to flash both partitions and risking a bricked phone again, my guess is booting an image directly causes it to not flip the partition boot switch, so it boots what you flashed

still cant seem to root this or get magisk working

nightscapes mode crashes the camera app instantly

 

[junk0]

The last version I tried had a safteynet/NFC issue. I want to reload this rom.
What is the current status & is there any way I can help test or contribute?

 

[stoag]

Anyone else getting just horrific battery life from this ROM? Like it wasn't made with lithium-gel in mind rather than lithium-ion?

 

[stoag]

Anyone else getting just horrific battery life from this ROM? Like it wasn't made with lithium-gel in mind rather than lithium-ion?

I swear, every time I pick up my phone it's dead. Ofc I am coming from the moto G7 power with it's OP 5000mah battery heh...

 

[kronflux]

December security patch build is up!

 

[junk0]

Just loaded Dec patched (latest). NFC & SafetyNet all check out. It's working well!

 

[factor19300]

when will the official version come? Stock rom have widevine l3 sertifica this fix it, ı need l1 sertifica

 

[ninjasinabag]

when will the official version come? Stock rom have widevine l3 sertifica this fix it, ı need l1 sertifica

Can't be don't, widevine l1 requires changes at the oem before it could be brought to rom.

Like our stock rom requires l1 by default before it can be added to a rom. Since the stock only shipped with l3, all you'll ever get is l3. Sorry, buddy.

 

[ninjasinabag]

On the side, great work Kronflux. Everything is so smooth.
Battery life being close to or better than stock is a major bonus.

Thank you.