• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

abandoned

Status
Not open for further replies.
Search This thread

DutchDanny

Inactive Recognized Developer
Feb 12, 2009
4,621
5,220
On Earth
Google Pixel 6
For your information

My source files: cwm-P5210-santos10wifi

Code:
# mount point	fstype		device				[device2]
/efs         	ext4		/dev/block/mmcblk0p2
/config		ext4		/dev/block/mmcblk0p3
/cache          ext4		/dev/block/mmcblk0p6
/system 	ext4		/dev/block/mmcblk0p8 
/data		ext4		/dev/block/mmcblk0p9		length=-16384
/recovery       emmc		/dev/block/mmcblk0p11
/modem		emmc		/dev/block/mmcblk0p12
/preload	ext4		/dev/block/mmcblk0p13
/boot		emmc		/dev/block/mmcblk0p10
/sdcard		vfat		/dev/block/mmcblk1p1		/dev/block/mmcblk1
 
Last edited:

Angel_666

Senior Member
Mar 18, 2009
317
856
What did you use to resign the IMG?

Send via my BinDroided HTC ONE
Standart tools of linux - tar IMG, then calculate MD5 summ for tar, then rename .tar in .MD5
After that Odin will accept any image to flash. :)

for Linux console:

Code:
tar -H ustar -c recovery.img > yourrecoveryname.tar

md5sum -t  yourrecoveryname.tar >> yourrecoveryname.tar

mv yourrecoveryname.tar yourrecoveryname.tar.md5

P.S. Test3 not working - freezes on logo.

I think you can calculate MD5 in Windows by TotalCommander or another advanced filemanager.
 
Last edited:

Angel_666

Senior Member
Mar 18, 2009
317
856

And again incorrect MD5.
Well, use this tool to create correct md5 images for odin:

https://mega.co.nz/#!2gQlkYCC!CQNmLi0O9Up4qaOOgYaBOiYqqGImjEdyW9rxKo58_ps

USAGE:
Unpack attachment in any place.
Place your recovery.img in "Odin_tarmaker" folder, then run "CreateOdin_tar.bat".
After some sec, new signed MD5 image appear in folder.

P.S. I think we must find any device on x86 platform with already working CWM. Then we can port recovery to our tab.
 
Last edited:

confyzone

Senior Member
Jun 13, 2009
325
68
Manitoba
Test 5 is in the OP

I have HIGH hopes for this one.... :D

I'll download now and give it a try

Sent from my GT-P5210 using xda app-developers app

---------- Post added at 09:00 PM ---------- Previous post was at 08:51 PM ----------

Update: Flashed fine, tablet rebooted into OS perfectly, now testing to see if recovery took

---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------

Update 2: I now can not boot into recovery, using all different methods to get into recovery, it does not show, it only continues with boot.
 

DutchDanny

Inactive Recognized Developer
Feb 12, 2009
4,621
5,220
On Earth
Google Pixel 6
I'll download now and give it a try

Sent from my GT-P5210 using xda app-developers app

---------- Post added at 09:00 PM ---------- Previous post was at 08:51 PM ----------

Update: Flashed fine, tablet rebooted into OS perfectly, now testing to see if recovery took

---------- Post added at 09:05 PM ---------- Previous post was at 09:00 PM ----------

Update 2: I now can not boot into recovery, using all different methods to get into recovery, it does not show, it only continues with boot.

So it boots up Android, instead of recovery?

Send via my BinDroided HTC ONE
 
  • Like
Reactions: trazfer
Status
Not open for further replies.

Top Liked Posts

  • There are no posts matching your filters.
  • 53
    CWM Recovery 6.0.2.8
    Build from source



    abandoned


    Tnx and Credits go out to: koush & cyanogenmod
    Without them this all would not be possible

    Tnx to Angel_666 for thinking with me
    9
    For your information

    My source files: cwm-P5210-santos10wifi

    Code:
    # mount point	fstype		device				[device2]
    /efs         	ext4		/dev/block/mmcblk0p2
    /config		ext4		/dev/block/mmcblk0p3
    /cache          ext4		/dev/block/mmcblk0p6
    /system 	ext4		/dev/block/mmcblk0p8 
    /data		ext4		/dev/block/mmcblk0p9		length=-16384
    /recovery       emmc		/dev/block/mmcblk0p11
    /modem		emmc		/dev/block/mmcblk0p12
    /preload	ext4		/dev/block/mmcblk0p13
    /boot		emmc		/dev/block/mmcblk0p10
    /sdcard		vfat		/dev/block/mmcblk1p1		/dev/block/mmcblk1
    7
    If you want to build your own rom, you need a specific file in the Kitchen.

    Put the attached file in: kitchen/tools/edify_defs

    Then the kitchen supports this device as well
    7
    Files are now at this new link... http://roms.bindroid.com/downloads/viewcategory/4-galaxy-tab3-p5210

    Sent from my GT-P5210 using XDA Premium HD app
    6
    Guess who has ROOT