AC8257 CPU Based unit's problems & questions - Couldn't find any info about it
- Thread starter EagleXDR
- Start date
I installed latest version of UI20 in xyauto site(June 1). After 2 day of testing, It seems the problem of 360 was solved.
So I need not to test the 3 split screen base package.
Home, return and volume buttons on the left side under mic and reset, don't respond. How to assign?
These buttons are assigned automatically in the booting progress.
Reboot the HU may help.
Yes, I also encountered various UI issues after format+flash and took a few reboots and resolve.
I recall there is a menu to set actions to the icon touch actions.
Also touch zones for these icons shifted in my case requiring calibration
YT5760B_AC8259 - Brick Recovery
Firmware Format and Installation Diagrams Here is a general overview diagram providing an understanding of ota, firmware, and TWRP flashing. And flashing upgrade to 64bit on <= 4GB HUs. https://mega.nz/folder/hDEhFAqZ#A0JuPIKhW83X5NZgL2NSWg/folder/QTllgKwA
My volume button on HU felt intermittent after 1.73.8 flashing upgrade. Turns out the touch zone changed and required recalibration. Try touching above and below to see if can get more deterministic behavior.
YT5760B_AC8259 - Brick Recovery
Firmware Format and Installation Diagrams Here is a general overview diagram providing an understanding of ota, firmware, and TWRP flashing. And flashing upgrade to 64bit on <= 4GB HUs. https://mega.nz/folder/hDEhFAqZ#A0JuPIKhW83X5NZgL2NSWg/folder/QTllgKwA
Sorry I was not very clear on my post. I was referring to the volume keys on the steering wheel. Pressing volume up or down normally would bring a graphical slider on screen that moves up or down. This does not show up during these early minutes of starting the HU. I can change the volume on the touch screen alright.My volume button on HU felt intermittent after 1.73.8 flashing upgrade. Turns out the touch zone changed and required recalibration. Try touching above and below to see if can get more deterministic behavior.
YT5760B_AC8259 - Brick Recovery
Firmware Format and Installation Diagrams Here is a general overview diagram providing an understanding of ota, firmware, and TWRP flashing. And flashing upgrade to 64bit on <= 4GB HUs. https://mega.nz/folder/hDEhFAqZ#A0JuPIKhW83X5NZgL2NSWg/folder/QTllgKwAsites.google.com
Trying to control the A/C by touching the screen has no effect. If I go to settings and reload the canbus for my car again everything works fine. Until the next time I start the car!
ah ok, xyauto seems to be changing CANBUS software often in last 1/2 year of releases. Maybe to add more CANBUS decoder modules?
I guess can flash back to older 1.73.7 to check if new bug. Flash is a bit of work of course
file date shows this is 2023/05/11. The one I gave you to install in post #1844 is 2023/06/01 so its newer.
Directory name says the newer one is "three-split-screen" I don't know the meaning. UI17/UI20 works with both firmware. Maybe three-split-screen is related to HU's split screen feature (I tried 2 split screen before but don't use it)
2023/05/11 file also don't have computer flash file so the ota file can only be used to USB upgrade an HU with 1.73.8 already installed.
I have the same problem. can you give me for attached screen. please please
Attachments
What do you mean you have same problem? Did you install UI with wrong resolution and bricked display? If so @mantecon1 explained to me this is how to recover from brick with wrong display driver
YT5760B_AC8259 - Brick Recovery
Firmware Format and Installation Diagrams Here is a general overview diagram providing an understanding of ota, firmware, and TWRP flashing. And flashing upgrade to 64bit on <= 4GB HUs. https://mega.nz/folder/hDEhFAqZ#A0JuPIKhW83X5NZgL2NSWg/folder/QTllgKwA
If you have other brick problem, then please explain more detail.
Yes I install
yes I have installed with wrong resolution. and now I needWhat do you mean you have same problem? Did you install UI with wrong resolution and bricked display? If so @mantecon1 explained to me this is how to recover from brick with wrong display driver
YT5760B_AC8259 - Brick Recovery
Firmware Format and Installation Diagrams Here is a general overview diagram providing an understanding of ota, firmware, and TWRP flashing. And flashing upgrade to 64bit on <= 4GB HUs. https://mega.nz/folder/hDEhFAqZ#A0JuPIKhW83X5NZgL2NSWg/folder/QTllgKwA
If you have other brick problem, then please explain more detail.
I have installed UI with wrong resolution and I have bricked display. now I need for correct resolution files.Attached my multimedia info. ThanksWhat do you mean you have same problem? Did you install UI with wrong resolution and bricked display? If so @mantecon1 explained to me this is how to recover from brick with wrong display driver
YT5760B_AC8259 - Brick Recovery
Firmware Format and Installation Diagrams Here is a general overview diagram providing an understanding of ota, firmware, and TWRP flashing. And flashing upgrade to 64bit on <= 4GB HUs. https://mega.nz/folder/hDEhFAqZ#A0JuPIKhW83X5NZgL2NSWg/folder/QTllgKwA
If you have other brick problem, then please explain more detail.
Attachments
For 1280x720 compatible UI to use for wrong display driver recovery. You can try UI17/UI20
Also read NOTE11 here. Thats also another possible 1280x720 display driver to use
YT5760B_AC8259 - HW FW
AC8257 AC8259 These are main chip models on the HU. These are lower end HU chips and several different hardware use them. There are also multiple firmware makers that develop for these chip. This website is mainly for the YT5760B hardware that uses these chips and firmware made by xyauto. New
More detail is necessary.
What sensor?
What do you mean by flash recovery HU? What did you flash? What do you mean by recovery?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
2
Yes, this HU isn't very good performance. But it also depend on what you run. Will be fine if just run radio for example so depends on on usage scenario. 2 steps made the biggest performance difference for my usage case.
Usage case : Navigation + radio + answer bluetooth calls + make calls via siri commands to iphone which then use HU's BT for mic+sound. Don't use CarPlay or AA or voice commands/recognition on the HU.
- 1.73.8 generally increased performance over 1.73.7 in either 32 or 64bit mode.
- An efficient offline navigation such as iGo and Sygic runs pretty fast. iGo is really fast but no voice/natural language destination specification. But its very fast, runs with UI17/20/23 as part of my usage case reasonably fast.
2
if you have 1.73.8 running, you can use spflashtool to flash the boot.img( it's patched with magisk, so it's rooted). Then install magisk.apk in android, run it, it will nag for a reboot, so reboot. Then install the v4a.apk (viper4android apk). Then start up magisk and install the v4a.zip(viper4android magisk module) as a module. Then reboot, then run viper4android app and turn legace mode on. Then setup viper4android.
As extra( for me i don't know if it sounded better, maybe yes, but it had less base) you can flash another viper4android module zip file in magisk. Choose either module for the sound as you like.
grtz1
that's a lot of effort you made. Too bad it didn't change much. For the sound, you could try viper4android. On my unit it results in a better sound.
greetings1
iGO does lose a lot to latest cloud based map leaders like GMaps. Offline so no realtime traffic and not as good routing. But the map is fast. Enter destination is old style (state->city->street->number) But it does auto switch day/night color mode (GMaps version for his Android HU version is old so don't switch color unless routing) And designed as a car navigator just get turn on HU, it fires up and shows your location while driving on maps. Doesn't pause in a search window first.
AC8257 CPU Based unit's problems & questions - Couldn't find any info about it
***** A site by @howardc64 which has a lot of...
forum.xda-developers.com
1
Put it in a readable USB and go do an Android update (car settings, system info). -
4i did it !!! i did it !!! my radio works!! to much people with this problem and i found the solution trying bored files from xygala, i was bored, i downloaded all the files in that drive 1 by 1.. seems it’s a driver for lg screens, i will edit this to make a tutorial, but i need help to do it, my english is not so good3Late Feb release of an xyauto UI is pretty good. Has maps (I use with google maps app with offline maps), radio, HU music player, a fixed app launch icon pane (left vertical) and a user changeable app launch icon pane (lower bottom) all on one screen.
Generally quite nice. google maps has voice input search, auto dark mode at night while navigating (none navigation mode unfortunately stays in day mode) map will be always north up while driving without navigation route.
patch file link Note this seems to be for 1024x600 screen only. Didn't see it in other resolution folders.
Mode switching is a bit mysterious (I have a steering wheel button programmed to switch modes). In the old default UI, mode switch with switch between currently running apps. Seems to do nothing on this UI while being displayed.
This launcher provide everything I use so no need to fiddle with the HU much. Just power on the car and drive. The useful features are
- FM radio (wife listens to this and its her car)
- Maps always displayed and track your position smoothly (Seen other launchers with map. Position only update every second or so, very jerky display). Google maps fixed to north up unless navigating. Voice input destination via mic icon on google maps search bar. Maps always in bright color mode (quite bright at night but area is not entire screen) Navigation will auto change to dark mode at night.
- BT works if setup to auto pair. Incoming calls pops up on screen. Can voice command out going calls with iPhone easily. Just say "siri call xxx" with iPhone mic able to hear you. iPhone looks up your contact and dials while connecting to HU's BT for speaker/mic sound.
- Music player will play all music files in the system/USB stick.
- Color choices are nice. Colorful but background is dim for night time use. Only issue is google maps none navigation mode display stays bright. Other nav software might handle this better.
- Google maps generally likes portrait displays like a phone. This horizontal smaller window sometimes hide the next driving intersection change behind the green direction box on top. Not too big of a problem.
- Left column icons are not changeable. Bottom row is user changeable.3I have recorder a video with the YT5760B system upgrade. It takes about 5 minutes to complete. In the attached ZIP file you can find the video.3
I managed to extract all the apks from 1.73.7.
Strangely. I couldn't find zlink.apk.
There is ZlinkActivationCode.apk, which is the only apk related to zlink.
-------------------------------------------------------------
Update!
Finally found the zlink apk. it was inside the vendor.new.dat.br.
I have uploaded zlink apk here, just in case someone needs it.
I believe this is the zlink ver 3.9.27 comes from the 1.73.7 firmware.
I haven't got chance to test it on my HU (now is midnight here in Australia), will do it tomorrow.3
Just installed 1.73.6 on 5760B 1024*600, didn't wipe user data.
Actually, I forgot and left 1.73.3 (don't recall if it was 5/24 or 7/25 version) on the USB stick w/1.73.6 and 1.73.3 got installed which wiped my user data. But then I installed 1.73.6 over this without wiping user data.
Biggest change I notice is just the 2x boot up pop sound is gone. So maybe xyauto have more orderly sound hardware initialization now
