How To Guide Activate VoLTE Poco X3 Pro

Search This thread

tftcamilo

Member
Aug 20, 2013
23
2
Enable VoLTE Poco X3 Pro (probably on other MIUI devices)

Tested and active Operator Tim Brasil.

volte print.jpg


What is necessary?
SOURCE
USB cable
QPST Download the latest version
Drivers
Terminal Emulator: Termux or Terminal Emulator for Android (play store)

Recommended backup EFS (recovery and QPST)

How to make!

Install QPST (Next, Next, Next, Finish)
Install the drivers (Next, Next, Next, Finish)
Restart the computer.
Enable USB debugging in developer settings
Disable operator verification with the code * # * # 86583 # * # *.
Activate VoLTE in Settings> Mobile networks> YES
Restart the device
Connect the device via USB
Open Terminal Emulator on your device and type the command below:

su
setprop sys.usb.config diag, serial_cdev, rmnet, adb

Start the PDC (QPST tool)
Select your device from the selection menu
Right-click on ROW_Commercial> Deactivate> Sub0 and Sub1
Right click on UMobile_Commercial_Malaysia> SetSelectedConfig> Sub0 and Sub1
Select ROW_Commercial and click REMOVER.
Select UMobile_Commercial_Malaysia and click ACTIVATE

qpst.jpg

Finished !!

No restart is required.

Credits to the user @cassiocmg because I used his tutorial as a model.
 
  • Like
Reactions: ChriMo and keyzjn

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    Enable VoLTE Poco X3 Pro (probably on other MIUI devices)

    Tested and active Operator Tim Brasil.

    volte print.jpg


    What is necessary?
    SOURCE
    USB cable
    QPST Download the latest version
    Drivers
    Terminal Emulator: Termux or Terminal Emulator for Android (play store)

    Recommended backup EFS (recovery and QPST)

    How to make!

    Install QPST (Next, Next, Next, Finish)
    Install the drivers (Next, Next, Next, Finish)
    Restart the computer.
    Enable USB debugging in developer settings
    Disable operator verification with the code * # * # 86583 # * # *.
    Activate VoLTE in Settings> Mobile networks> YES
    Restart the device
    Connect the device via USB
    Open Terminal Emulator on your device and type the command below:

    su
    setprop sys.usb.config diag, serial_cdev, rmnet, adb

    Start the PDC (QPST tool)
    Select your device from the selection menu
    Right-click on ROW_Commercial> Deactivate> Sub0 and Sub1
    Right click on UMobile_Commercial_Malaysia> SetSelectedConfig> Sub0 and Sub1
    Select ROW_Commercial and click REMOVER.
    Select UMobile_Commercial_Malaysia and click ACTIVATE

    qpst.jpg

    Finished !!

    No restart is required.

    Credits to the user @cassiocmg because I used his tutorial as a model.
    1
    I followed this guide and it works, no need for USB, drivers, terminal.