after reset, the phone writes «the system has been destroyed”

erjanfromkyrgyzstan

New member
Apr 5, 2020
3
0
0
after a reset, the phone writes system has been destroyed, and the volume down button does not work for me,twrp too, because I once installed and I had the same error when I went to twrp.dificult situation.i hope in your help.
 

RFD80M-75679

Senior Member
Sep 5, 2019
160
59
38
Lanao del Norte
after a reset, the phone writes system has been destroyed, and the volume down button does not work for me,twrp too, because I once installed and I had the same error when I went to twrp.dificult situation.i hope in your help.
EDL flash stock again

1. Download 10.0.13.0 fastboot images, MiFlash 2017.04.25, ADB drivers 1.43, and install them
2. Extract the fastboot images to Hard Drive's root folder (such as D:/)
2. Boot to fastboot (power + vol down)
3. Type 'fastboot oem edl'
4. Open MiFlash. Locate the fastboot images
5. Select 'clean all'. Do not select clean + lock. Start flashing
6. If 'success' is displayed, long-press power and wait until 'welcome' is displayed.
7. And you're basically done. Your data has been deleted with the process tho'.
 

erjanfromkyrgyzstan

New member
Apr 5, 2020
3
0
0
EDL flash stock again

1. Download 10.0.13.0 fastboot images, MiFlash 2017.04.25, ADB drivers 1.43, and install them
2. Extract the fastboot images to Hard Drive's root folder (such as D:/)
2. Boot to fastboot (power + vol down)
3. Type 'fastboot oem edl'
4. Open MiFlash. Locate the fastboot images
5. Select 'clean all'. Do not select clean + lock. Start flashing
6. If 'success' is displayed, long-press power and wait until 'welcome' is displayed.
7. And you're basically done. Your data has been deleted with the process tho'.
my volume down button does not work
 

erjanfromkyrgyzstan

New member
Apr 5, 2020
3
0
0
EDL flash stock again

1. Download 10.0.13.0 fastboot images, MiFlash 2017.04.25, ADB drivers 1.43, and install them
2. Extract the fastboot images to Hard Drive's root folder (such as D:/)
2. Boot to fastboot (power + vol down)
3. Type 'fastboot oem edl'
4. Open MiFlash. Locate the fastboot images
5. Select 'clean all'. Do not select clean + lock. Start flashing
6. If 'success' is displayed, long-press power and wait until 'welcome' is displayed.
7. And you're basically done. Your data has been deleted with the process tho'.
Help pls