This thread is for all non-development discussions about the AJK kernel.
Please keep it civil and on topic!
Touchscreen Tuning process
1. Open ExTweaks
2. Select Screen tab
3. Go to "Batt Move Filter", increase it BY ONE and apply
4. Test it, if it still stutter, increase ONE STEP ONLY and apply
5. Repeat step 4 till the stutter/jitter is gone. Don't set it too high as it'll result the touchscreen capability lost
6. If "Batt Move Filter" is OK without any jitter again, connect your charger and go to "Chrg Move Filter"
7. Repeat step 4 till you satisfied and again: DON'T SET IT TOO HIGH, ONLY INCREASE TILL THE JITTER/STUTTER IS GONE
Do this at your own risk!
If you lost the touch capability caused by too high value then you will need to reset ExTweaks profile in recovery.
I can say its different for each device as the test shown:
-My S2: Batt Filter 16 & Chrg Filter 50, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
-My son's S2: Batt Filter 13 & Chrg Filter 46, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
-My daughter's S2: Batt Filter 14 & Chrg Filter 48, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
Please keep it civil and on topic!
Touchscreen Tuning process
1. Open ExTweaks
2. Select Screen tab
3. Go to "Batt Move Filter", increase it BY ONE and apply
4. Test it, if it still stutter, increase ONE STEP ONLY and apply
5. Repeat step 4 till the stutter/jitter is gone. Don't set it too high as it'll result the touchscreen capability lost
6. If "Batt Move Filter" is OK without any jitter again, connect your charger and go to "Chrg Move Filter"
7. Repeat step 4 till you satisfied and again: DON'T SET IT TOO HIGH, ONLY INCREASE TILL THE JITTER/STUTTER IS GONE
Do this at your own risk!
If you lost the touch capability caused by too high value then you will need to reset ExTweaks profile in recovery.
I can say its different for each device as the test shown:
-My S2: Batt Filter 16 & Chrg Filter 50, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
-My son's S2: Batt Filter 13 & Chrg Filter 46, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
-My daughter's S2: Batt Filter 14 & Chrg Filter 48, stutter/jitter gone completely, below that value the screen is stuttering/jittering.
Last edited: