[AKT] Advanced Kernel Tweaks v1.6 FINAL | Insane Battery & Performance(SD820/1|OP3/T)

[harish_hpd]

@Eadaro
I conclude that with ElementalX does not need to apply the tweak at every reboot.
Thank you, very much

i would also like to know this. elementalx does support initd. thank you.

Send From Oneplus A3003

 

[mascian]

i would also like to know this. elementalx does support initd. thank you.

Send From Oneplus A3003

flar2 wrote:
"Init.d has not worked reliably since before Lollipop, so no, it's not supported. You should use SuperSU and su.d instead."
Unfortunately, Elementalx and bluespark does not support init.d
Too eng.stk wrote:
"init.d support (put your scripts in /system/su.d or /su.su.d)"*
@Asiier
Can I change the path of the file after using the AKT command?

from "/system/init.d/99AKT" to "/system/su.d/99AKT"

In your opinion, it would correct this procedure?
Thank you, very much.

 

[harish_hpd]

flar2 wrote:
"Init.d has not worked reliably since before Lollipop, so no, it's not supported. You should use SuperSU and su.d instead."
Unfortunately, Elementalx and bluespark does not support init.d
Too eng.stk wrote:
"init.d support (put your scripts in /system/su.d or /su.su.d)"*
@Asiier
Can I change the path of the file after using the AKT command?

from "/system/init.d/99AKT" to "/system/su.d/99AKT"

In your opinion, it would correct this procedure?
Thank you, very much.

but after reboot when i check it shows active profile as what i have selected before.. does it mean its working without having to apply a profile on every boot?
thanks in advance for clearing my doubt.

Send From Oneplus A3003

 

[mascian]

but after reboot when i check it shows active profile as what i have selected before.. does it mean its working without having to apply a profile on every boot?
thanks in advance for clearing my doubt.

Send From Oneplus A3003

Sorry, your question better to wait for Asiier's answer

 

[dante_nfs]

but after reboot when i check it shows active profile as what i have selected before.. does it mean its working without having to apply a profile on every boot?
thanks in advance for clearing my doubt.

Send From Oneplus A3003

No, i tested it, the profile is not getting applied(even if it shows that it's applied) , it's better to apply the profile after every reboot.

 

[mascian]

No, i tested it, the profile is not getting applied(even if it shows that it's applied) , it's better to apply the profile after every reboot.

Perhaps because kernel lacks init.d support?

 

[Mostafa Wael]

Soon all that chaos will be flushed away guys, just wait for some time and everything will be Okeydoke :good:

 

[SREEPRAJAY]

@Asiier @Mostafa Wael
Finally managed to get the AKT working on Experience ROM 7.0

Just followed this sequence (not sure if it is related to each other )
Clean flash the 9.6 Experience ROM
SuperSU
Reboot to system
Reboot to recovery. Instal ElementalX Kernel and then AKT 1.0
reboot and then Terminal (grant super rights) and then work on AKT.
Voila ....Xana profiles work.... working perfectly.

Thanks guys

 

[Mostafa Wael]

@Asiier @Mostafa Wael
Finally managed to get the AKT working on Experience ROM 7.0

Just followed this sequence (not sure if it is related to each other )
Clean flash the 9.6 Experience ROM
SuperSU
Reboot to system
Reboot to recovery. Instal ElementalX Kernel and then AKT 1.0
reboot and then Terminal (grant super rights) and then work on AKT.
Voila ....Xana profiles work.... working perfectly.

Thanks guys

highly appreciated indeed! :highfive:

 

[harish_hpd]

No, i tested it, the profile is not getting applied(even if it shows that it's applied) , it's better to apply the profile after every reboot.

how you identified it? teach me.
so if i copy 99AKT to su.d folder will it work?
Send From Oneplus A3003

 

[Ventigo]

Hi guys I'm totally noob in this type of mods...Do I need applying the profiles in my terminal app and exkm? Or just in one of them? Sry if this question was asked before but I didn't find any answer

 

[Prattham]

Hi guys I'm totally noob in this type of mods...Do I need applying the profiles in my terminal app and exkm? Or just in one of them? Sry if this question was asked before but I didn't find any answer

For akt you have to use terminal only

Sent from my OnePlus3 using XDA Labs

 

[mrcigi]

how you identified it? teach me.
so if i copy 99AKT to su.d folder will it work?
Send From Oneplus A3003

I found I had better success with the file in su.d than in init.d

 

[harish_hpd]

I found I had better success with the file in su.d than in init.d

now i have the file in both su.d (copied from init.d) and initd locations. how can i confirm if its working without needing to apply profile in terminal on every reboot... thanks for your reply..

Send From Oneplus A3003

 

[dante_nfs]

how you identified it? teach me.
so if i copy 99AKT to su.d folder will it work?
Send From Oneplus A3003

Well by checking with ex kernel or kernel auditor, checking somethings like touch boost, which all of the profiles here disable it.

 

[SREEPRAJAY]

@Asiier @Mostafa Wael @patalao and senthil

Wanted to leave a few pics as a testimony to the wonderful work you guys have done...still more than 50% juice left...

Plz pardon me for the large pics...courtesy the legacy app



Sent from my ONEPLUS A3003 using XDA-Developers Legacy app

 

[SREEPRAJAY]

Missed the actual pic...[emoji14]

Sent from my ONEPLUS A3003 using XDA-Developers Legacy app

 

[Prattham]

@[email protected] [email protected] and senthil

Wanted to leave a few pics as a testimony to the wonderful work you guys have done...still more than 50% juice left...

Plz pardon me for the large pics...courtesy the legacy app

Damn which profile :laugh:

Sent from my OnePlus3 using XDA Labs

 

[Mostafa Wael]

Missed the actual pic...[emoji14]View attachment 4012948

Sent from my ONEPLUS A3003 using XDA-Developers Legacy app

That's tremendous!
Curios to know which profile you used ?

 

[dioxide95]

1. Can anyone please explain the difference between input boost and touch boost? (I use kernel adiutor)

2. I have enabled "apply on boot" for the tweaked settings (Project x.a.n.a applied through terminal) via kernel adiutor... I think that doesn't require me to apply via terminal after every reboot, right?