• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[ALL ROM] RedMi Note 2 Booster Patch

Search This thread

zhobotero69

Senior Member
Mar 13, 2012
79
27
I guess this is just a share on his work with no support.. Reflashing stock boot.img to revert back your rom woudn't help solve the problem like updater app sudden fc.. And i dont notice any increase in performance. Sad for me i forgot to make a nandroid back up.
 
  • Like
Reactions: DjayaMustafa

Tctien342

Senior Member
Aug 15, 2014
67
136
I guess this is just a share on his work with no support.. Reflashing stock boot.img to revert back your rom woudn't help solve the problem like updater app sudden fc.. And i dont notice any increase in performance. Sad for me i forgot to make a nandroid back up.
flash again your stock rom with no wipe ! it will back to stock again ! flash stock boot just disable the script but still have the modded build.prop ! you can use v3 after flash your stock rom, v3 may fix all problem from v2
 

elaurens

Senior Member
Aug 19, 2010
61
6
Hey Tctien, I'm borrowing my RN2 for the moment so can unfortunately not test your patch. The part I'm mainly interested in is enabling init.d support on MIUI ROMS. I created a thread over here and on en.miui.com's forum to see if anyone's been able to actually run scripts from the init.d folder after having enabled it. Do you know if this is actually working after flashing your patch? I would try this out myself, but don't have the phone right now.

Thx! :)
 

cukierkas

Senior Member
May 26, 2010
2,158
683
Running perfectly with version 2 and Sony. Should I upgrade to v3?
Can I flash over current cm12.1 + v2?
Can u state what build.prop tweaks U have added?

Išsiųsta naudojantis Redmi Note 2 Tapatalk 4 Lt
 
  • Like
Reactions: fluffyboy2

Xmister

Senior Member
Jul 4, 2010
1,037
1,946
Let me help you, with interactive tweaks, as these doesn't make much sense.
403 in the above_hispeed list doesn't do anything as it is below hispeed.
Sample time is between 2 timer fire, so it's actually the same as if it was 40000.
Any setting for a frequency are valid for upper frequencies, so e.g "98 403000:19" 19 instantly nullifies 98 for any freq.
 

Tctien342

Senior Member
Aug 15, 2014
67
136
Thanks bro..

Let me help you, with interactive tweaks, as these doesn't make much sense.
403 in the above_hispeed list doesn't do anything as it is below hispeed.
Sample time is between 2 timer fire, so it's actually the same as if it was 40000.
Any setting for a frequency are valid for upper frequencies, so e.g "98 403000:19" 19 instantly nullifies 98 for any freq.
Oh thanks you so much, can't you give us an optimized value for this cpu, i have change value like this for v4 an testing till now:
attachment.php

And i got this:
attachment.php

attachment.php


Is that a good config ? !
thanks you!
 

Attachments

  • Screenshot_2015-12-18-15-49-00.png
    Screenshot_2015-12-18-15-49-00.png
    93.9 KB · Views: 3,543
  • Screenshot_2015-12-18-16-49-54.jpg
    Screenshot_2015-12-18-16-49-54.jpg
    227 KB · Views: 3,199
  • Screenshot_2015-12-18-16-50-02.png
    Screenshot_2015-12-18-16-50-02.png
    104.4 KB · Views: 3,501

Xmister

Senior Member
Jul 4, 2010
1,037
1,946
Oh thanks you so much...
hispeed freq at 403 could introduce some big lag.
Your above_hispeed line does the same as "403000:60000 806000:20000"
Waiting 60ms at 403 will cause lag and firing up extra cores, so it is actually bad for battery life.
Interactive boost is disabled by default, so boostpulse_duration does nothing.
sample_time can only be a multipler of timer_rate, so right now it is the same as if it was 30000.

My values right now are the following, but I'm always experimenting with them. So far these give pretty good result, as you can see in my Save battery thread.
Screenshot_2015-12-19-15-38-29_jackpal.androidterm.png
 
  • Like
Reactions: Tctien342

Tctien342

Senior Member
Aug 15, 2014
67
136
hispeed freq at 403 could introduce some big lag.
Your above_hispeed line does the same as "403000:60000 806000:20000"
Waiting 60ms at 403 will cause lag and firing up extra cores, so it is actually bad for battery life.
Interactive boost is disabled by default, so boostpulse_duration does nothing.
sample_time can only be a multipler of timer_rate, so right now it is the same as if it was 30000.

My values right now are the following, but I'm always experimenting with them. So far these give pretty good result, as you can see in my Save battery thread.
View attachment 3582017
Thanks you very much :3 ! Have to learn more...
 

fluffyboy2

Senior Member
Oct 18, 2015
103
36
Does flashing 4A and 4B on a clean rom install Xmister's config too? And do I need to install V4AddOn or is that automatically done in A+B? thanks!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 16
    REDMI NOTE 2 BOOSTER PATCH
    BATTERY-PERFORMANCE-ADBLOCK-BRAVIA ENGINE
    ALL ROM

    INCLUDE:
    + Init.d Support
    + Tweaked INTERACTIVE governor . :good::good:
    + Init.d Script
    + Tweaked Build.prop
    + CM12.1-AOSP add swap ram.
    + Bravia engine v4 By Plamb1r, Paget96
    + Host File to remove ads :p

    HOWTO
    + Dowload patch available for your rom
    + Go to recovery and flash it !
    + You can remove it by flash your rom again!
    +Update from v2 you can flash v3 without wipe but you should flash your stock rom again without wipe, after that, flash v3
    NOTICE Should flash it in a clean rom without any tweaks and sound mods !

    Now V4:
    +unsing Xmister config- Thanks to him!
    +Seeder set to englager
    +Add adaway to Update file host
    +Use z-ram instead of Swap ram, 1gb z-ram
    +In full version have Sony Sound+SonyAlbum+Sonymovie by androidexpert35 (Thanks to him)

    V4Patcher Info:
    V4-A: Fully Patch + App Sony(Album+Movie+Music)
    V4-B: OnLy Patch ( More Stable Than V4-A)
    V4-C: For Rom which have already tweaked, Like V4-B
    V4-D: For Rom which have already tweaked, Like V4-A
    #C-D: Removed Build.prop and some init.d tweaks
    V4AddOn:
    +For UnderClock Cpu DownTo 1183or1469Mhz
    Note: Use V4-A and B for clean rom, If you rom have tweaked then flash C and D

    Now: V4
    Link : https://drive.google.com/folderview?id=0Byybyd_nA78MQ003Sk1HTFZBcUE&usp=sharing
    2
    Patch @Tctien342 can say is "extremely great" Rom tasty but no patch of pay is like good wine that does not have you beat. Not need to lower the pulse, LS ..mod strokes. Just patch the uncle is from 6 pm to 7:30 battery minute, you have to wait for stable rom 24-48h offline.
    I really thank you again.
    Happy 4rum miui.vn and more players like paying a visit.
    Greeting.

    I thought we need to write in English.
    1
    Available on.. "7.0.12.0 GloBal" so it works fine on Angels & Demons V4.0 rom?
    I currently have CM 12.1 Build 11.. but what is CyanEcch?

    Should I remove LSPEED and an Automate CPU tweak before applying? thanks
    1
    The link dosen't work.