All Things Boost Galaxy S III

jdsingle76

Senior Member
Jan 19, 2013
2,816
2,951
0
1. Since the Galaxy S III became available as a Boost variant, there’s been an increasing amount of questions, issues, and requests for builds. I have collaborated with the powers that be, and it was determined that it might be a good idea to start a Boost only thread. This thread is dedicated to anything and everything Boost Galaxy S III related.

2. I will update and bump and sticky and edit and whatever else needs to be done the best that I can, but it is open and available to all. This is YOUR thread, just as much as it is mine. I encourage folks to ask questions, post relevant links, tutorials, helpful hints, and anything else they come across while tinkering with their new phone that may help others related to the Boost S3.

3. First and foremost, as always is the disclaimer. We are all responsible for our own actions. I am not responsible for what you do to your phone, so please do not flame me or anyone else in this thread if you do something that potentially fries your device.

4. If you post a link to something flashable, either through Odin, CWM, Heimdall, TWRP, etc, please test it on your own phone first or have someone test it before you do so. If it works, and will benefit someone, feel free to include it. I will most likely PM the dev and ask to put it in the OP.

5. And finally, please be courteous and respectful. We are all here to learn from one another, and do not need sarcasm, unkindness, flaming, or disrespect, of any kind. Thank you and enjoy.
 
Last edited:

jdsingle76

Senior Member
Jan 19, 2013
2,816
2,951
0
Stock Unrooted OTA Odin Tar

This is the official, stock, right out of the box, Boost MD7. This will unroot your device, and take everything back to the way it was when you got it. Please thank the OP, Smith058, over at AF (link to OP at the bottom), since he was so gracious to let me post it here, and to let me use it to cook up something good for you folks :) More to come on that one! The only issue I’ve noticed on this build is there’s no boot up sound. But it flashed modem, stock recovery, put the device status back to “normal” and made the “custom” in Odin mode back to “official.” This should come in handy if you need to send it back for repair, or just want to start anew. The coming zip (once it’s uploaded) has working sound.

Stock MD7 Odin Tar Link https://mega.co.nz/#!ARkXGZCS!RITkIjvPnT51c6nyDdFvE2Z4oBNQt0PTcKnCGWuavdo

Link to Smith058’s OP(be sure to give him a shout out!)
http://androidforums.com/boost-mobile-galaxy-s3-all-things-root/753772-odin-backup-sph-l710_md7-stock.html

Stock OTA MG2 Tar:
http://www.androidfilehost.com/?fid=23212708291678209
Flashing Instructions:
1. Download and Install Odin to your PC
2. Download the ROM to your computer, and remember where you put it :)
3. Boot your phone into download(Odin) mode by pressing volume down, home button, and power button simultaneously
4. Once in Odin mode, connect your phone to your PC
5. Once the “COM” block turns blue, click the PDA button, and navigate to the ROM tar.
6. As a habit, I uncheck the F. Reset Time and Auto Reboot boxes as well
7. Click Start. When it’s done, pull the battery.
8. Reinsert battery, boot up, and profit
 
Last edited:

SweetBearCub

Senior Member
Dec 27, 2007
94
44
0
The only issue I’ve noticed on this build is there’s no boot up sound. The coming zip (once it’s uploaded) has working sound.
My phone is running a rooted version of the stock MG2 ROM. While it has the Boost startup splash "4G" screen, I don't think there ever was a sound component.

Also - If I recall correctly, some custom ROMs labelled as compatible with the Sprint Galaxy S3 will cause us to LOSE 4G SERVICE, because they do not have the Boost-specific APN settings in them, and changing APN settings on Jellybean ROMs is (apparently) not possible as it was on Ice Cream Sandwich ROMs. So beware, and make sure that any ROMs that you want to flash will not kill your 4G!
 

jdsingle76

Senior Member
Jan 19, 2013
2,816
2,951
0
My phone is running a rooted version of the stock MG2 ROM. While it has the Boost startup splash "4G" screen, I don't think there ever was a sound component.

Also - If I recall correctly, some custom ROMs labelled as compatible with the Sprint Galaxy S3 will cause us to LOSE 4G SERVICE, because they do not have the Boost-specific APN settings in them, and changing APN settings on Jellybean ROMs is (apparently) not possible as it was on Ice Cream Sandwich ROMs. So beware, and make sure that any ROMs that you want to flash will not kill your 4G!
I think it was an issue with the Tar, because when I built the flashable zips, they not only had the Boost animation, but the sound component as well. And I have seen around that some Sprint ROMs will cause issues with 4g. I know that it is possible to get into change the "guts" of your phone if you have your MSL by with JB Touchwiz ROMs by dialing ##3282# from your phone's dialer. However, for some reason, with the zip I just built, it's not cooperating. I'm going to swap out secphone.apk later today, from another stock build, and see if that fixes the issue. But thanks for the heads up. That's what this thread is all about.
 

jdsingle76

Senior Member
Jan 19, 2013
2,816
2,951
0
I've been prompted for a system update... safe?
If you flashed the rooted one, chances are it won't let you update, but give it a try. Additionally, if you have custom recovery, which you had to in order to flash the zip, it most likely won't let you update it either. It's an Android Software update, not a firmware. I would try it, and I'm sure it will fail, but at least you won't get prompted anymore for software updates :) But yes, it is safe to try.
 

SweetBearCub

Senior Member
Dec 27, 2007
94
44
0
If you flashed the rooted one, chances are it won't let you update, but give it a try. Additionally, if you have custom recovery, which you had to in order to flash the zip, it most likely won't let you update it either. It's an Android Software update, not a firmware. I would try it, and I'm sure it will fail, but at least you won't get prompted anymore for software updates :) But yes, it is safe to try.
jdsingle76 is correct. It won't hurt anything, it just won't work. If you accept the update, your phone will reboot into recovery, process for a few seconds, and fail with an error. However in my experience, that will not stop the software update prompts from re-occurring. If I recall, the best way to stop them was to use something like Titanium Backup and freeze something having to do with 'OTACERTS'. It's been a while, so my info may be out-of-date on that front.
 

nickdagreat

Member
Sep 17, 2010
6
0
0
can someone please reupload the stock SPH-L710 odin tar file else where before I brick my phone accidentally, its not letting me use recovery. The root method i used did not work correctly, now my phone is now working properly and i just want to get back to stock to try a different method for rooting, i need this odin file please!
 

smith058

Member
Dec 9, 2011
26
5
0
Last edited:

erick1457

New member
Feb 19, 2014
1
0
0
Guys, i know this post is a little bit old, but i was wondering if I could flash this file with the Sprint Version (same one, SPH-L710) I know this will not harm my phone but I just want to make sure. is it safe?
 

jdsingle76

Senior Member
Jan 19, 2013
2,816
2,951
0
Guys, i know this post is a little bit old, but i was wondering if I could flash this file with the Sprint Version (same one, SPH-L710) I know this will not harm my phone but I just want to make sure. is it safe?
What file from this op are you referring to? But to answer your question, yes, you can flash ant sprint file to the boost variant, and vice versa, you just might have to change apn, mmsc, stuff like that, to get mms to work.

Sent from my SPH-L710 using Tapatalk
 

alemosman

Member
Nov 19, 2013
37
2
0
Atlanta, Georgia
Boost Stock 4.3

What file from this op are you referring to? But to answer your question, yes, you can flash ant sprint file to the boost variant, and vice versa, you just might have to change apn, mmsc, stuff like that, to get mms to work.

Sent from my SPH-L710 using Tapatalk
Thanks to all of u guys out there especially jdsingle76, Can anyone help with untouched Stock BoostMobile S3 4.3.tar ODIN ROM, i would be glad for any help in this regard, Meanwhile are we seeing Kitkat for BM S3? , Again is there a chance we can be KNOX free again in our lives?
 

jdsingle76

Senior Member
Jan 19, 2013
2,816
2,951
0
Thanks to all of u guys out there especially jdsingle76, Can anyone help with untouched Stock BoostMobile S3 4.3.tar ODIN ROM, i would be glad for any help in this regard, Meanwhile are we seeing Kitkat for BM S3? , Again is there a chance we can be KNOX free again in our lives?
I have not gotten my hands on a 4.3 Odin tar yet. If you do remember it'll have Knox, and I think Knox is here to stay. Ice heard rumors about Kit Kat for this phone but nothing's come out yet. Thanks for the support!

Sent from my SPH-L710 using Tapatalk
 
  • Like
Reactions: alemosman

alemosman

Member
Nov 19, 2013
37
2
0
Atlanta, Georgia
I have not gotten my hands on a 4.3 Odin tar yet. If you do remember it'll have Knox, and I think Knox is here to stay. Ice heard rumors about Kit Kat for this phone but nothing's come out yet. Thanks for the support!

Sent from my SPH-L710 using Tapatalk
Thank you Jdsingle76, Boost Mobile are doing a hell of a job there keeping the 4.3 Odin tar under their sleeves.:cowboy:
 

smith058

Member
Dec 9, 2011
26
5
0
knox bootloader scares me soo much that am still running stock unrooted, am afraid when i void my warrant i might not be able to upgrade to kitkat if it ever comes out
Don't fret. .. If kitkat comes out there will definitely be a custom rom made with it that you will be able to flash. With root you will have many more options than you ever will with stock.