Alps FF5000 and other AC8227L chipset head units - updates and solutions

I'm deciding to close this thread and help users in another way, so should I close this thread ?

  • Yes

  • No

  • Leave it for future problems and solutions

  • Leave it as it is


Results are only viewable after voting.
Search This thread

mohamed taher elbstani

Senior Member
Nov 2, 2021
92
108
Please do ! On email I'll write it to you in privateb chat , thanks.
FIRMWARE (MTK 8227L_8) (JUNSUN V1) (FF-5000 ALPS ) ANDROID 10 1024x600
USE SP_Flash_Tool BY PC OR LAPTOP
STEP1 OPEN SP FLASH TOOL . FROM DOWNLOAD TAPE CHOOSE SCATTER AND PRELOADER
STEP2 FROM DOWNLOAD TAPE CHOOSE Download Only OR Format All + Download
STEP3 PRESS Download
STEP4 CONNECT USB CABLE (4PIN) WITH PC (The cable can be made to connect manually, shown in the pictures)
STEP5 CONNECT THE POWER 12V TO BOARD the process starts
STEP6 AFTER Download Restart The Device
STEP7 Touching the screen will be inverted .By touching the screen with five fingers The touch is in an empty place You can adjust the screen to get back to normal( It may not work the first time, but it will work in the end)
 

Attachments

  • SP_Flash_Tool.png
    SP_Flash_Tool.png
    143 KB · Views: 323
  • Connection between 4pin cable and PC.jpg
    Connection between 4pin cable and PC.jpg
    1.3 MB · Views: 314
  • Connection between device and PC.jpg
    Connection between device and PC.jpg
    1.5 MB · Views: 318
Last edited:

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
FIRMWARE (MTK 8227L_8) (JUNSUN V1) (FF-5000 ALPS ) ANDROID 10 1024x600
USE SP_Flash_Tool BY PC OR LAPTOP
STEP1 OPEN SP FLASH TOOL . FROM DOWNLOAD TAPE CHOOSE SCATTER AND PRELOADER
STEP2 FROM DOWNLOAD TAPE CHOOSE Download Only OR Format All + Download
STEP3 PRESS Download
STEP4 CONNECT USB CABLE (4PIN) WITH PC (The cable can be made to connect manually, shown in the pictures)
STEP5 CONNECT THE POWER 12V TO BOARD the process starts
STEP6 AFTER Download Restart The Device
STEP7 Touching the screen will be inverted .By touching the screen with five fingers The touch is in an empty place You can adjust the screen to get back to normal( It may not work the first time, but it will work in the end)
Good to know for rooting and getting to factory settings, but will not risk bricking device if not 100% sure in what I'm doing.
Still, I managed my radio.app to work with original firmware that seller sent and is working now and with this 3.com ts.mainUI8 that you sent it has a nicer UI and with themes posted above.
Will see how long it last operating. Now it is just matter of time when unit memory eventually, when new card is inserted in slot, will write again in wrong memory (SD CARD inserted - all files for iGO and maps and apk of APPS are there aswell). As for losing settings after bootup, that is history, in MP mode section of factory settings I have managed to save my unit settings (it's a kind a backup of unit settings) and now at every unit bootup there is no need to configure any icons again or setting each time.

I noticed also at factory settings that it can install "THEME icon" without installing third party apk , and it is located in ICONS menu. There you can activate/deactivate any icons showing in UI (like 360view, android auto, climate control, radio, DAB+ -if connected in multimedia, rearview camera, DVR, ATV etc.).
This "THEME" icon is mandatory for getting new themes from Ali express (found a bunch of themes for UI-s sold for small price), they are substitute for ugly UI's of Chinese firmwares. This themes look awesome and modern organized, but not sure if will work with various devices as 8227L mark is not in any description of this theme pack.

Coincidentally, I came across open source code for Head Units
(https://developer.android.com/training/cars/media), which means that as with Microsoft systems, the shell or the entire UI of the system can be changed.
As the Chinese do before the sale, we can also change the entire firmware to our liking and needs. RADIO app and TSPLAYER app (music with MP3) can be changed to change options such as naming stations, editing the entire interface for the radio, all the way to customizing the application and the new DAB + system. Will try this source code and edit, and test in BLUESTACKS platform (emulator of android system) on my PC.
 
Last edited:

mohamed taher elbstani

Senior Member
Nov 2, 2021
92
108
LAUNCHER FOR ( MTK 8227L_8 )(JUNSUN V1) (FF-5000 ALPS) (1024x600)
( DO NOT WORK WITH alps ac8227L_demo XYAUTO )
 

Attachments

  • LauncherMTK10.apk
    4.6 MB · Views: 402
  • LauncherMTK10.png
    LauncherMTK10.png
    165.2 KB · Views: 575
  • launcherMTK11.apk
    4.3 MB · Views: 486
  • LauncherMTK11.png
    LauncherMTK11.png
    149.3 KB · Views: 570

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
Launcher 11 looks very good and it is working more fluently with my ALPS FF5000, thanks for that!

Next one radio application issues , freezing ....
Radio application is working till 2 or 3 engine startups and engine shutdowns and then freeze.

So finally, I have manage to resolve this issue.

Problem is in two wires - "AUTO ANT" - antenna +12V (must be connected together two blue wires if you have those, one that goes from antenna or amplifier and other that comes from device harness cable), and another wire, the red one , that comes from amplifier (if you bought amplifier for FM antenna 3in1 - DAB+ and FM amplifier and connected it to regular radio antenna) and on this red one says it must be connected to 12V constant wire or + wire, ussually it has constant 12V volts from battery.
Now, with this wires connected correctly to each other radio app problem is gone. It works more efficiently with this 3.com.tsmainUI8 you gave me mohamed taher elbstani , thanks. Keep up the good work.
Also memory of device (last memory state, stations from radio, icons on main screen, navi set, etc.) is no longer problem as it has resolved by connecting wires correctly.
 

SkipReplay

Member
Oct 16, 2021
14
0
So I have the xtrons TSD700L from Amazon. It says it's the FF-5000 and it's 8227l-10. Is there a firmware for this? And will new firmware help the sound at all. My biggest issue with this is that it seriously lacks bass and I can't do anything to fix it.
20211022_210448.jpg
 

Attachments

  • 20211022_210230.jpg
    20211022_210230.jpg
    267.5 KB · Views: 192
  • 20211022_210455.jpg
    20211022_210455.jpg
    514.7 KB · Views: 186

kolios13

Member
Jul 5, 2013
8
3
Hi, yes you can use it on your device and other firmwares aswell as long it has 8227L_8 in firmware name.
Hello, I have unit that has 8227L_11 in its firmware name. Would the firmwares posted in this thread work?

EDIT:
OK after reading a lot of posts I am little bit conffused as to what firmware would I be able to install. Maybe someone could create a table of the appropriate UI interface and device prefix (e.g. XRC or CHS)?

For example my unit has the following details:

About Device
HMI: XRCH.D.O.F.3.01.2021.07.05.09.30
MCU: TS907.190518(H)
MEDIA: HC_v2.0.0_210413_1030(v1.84)
BTV: BT.21.05.27.1500(C0:81:35:20:86:99)

Build ID: FF_8227L_11


I have asked the seller to send me an updated version and he sent me the 8227L_8乐旅UI05-国外11_v2_20220119 which as I have seen @Anton TNT you say it is slow? Would you be abe to say what my options would in terms of which firmware i could Install?
 
Last edited:

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
Hello, I have unit that has 8227L_11 in its firmware name. Would the firmwares posted in this thread work?

EDIT:
OK after reading a lot of posts I am little bit conffused as to what firmware would I be able to install. Maybe someone could create a table of the appropriate UI interface and device prefix (e.g. XRC or CHS)?

For example my unit has the following details:

About Device
HMI: XRCH.D.O.F.3.01.2021.07.05.09.30
MCU: TS907.190518(H)
MEDIA: HC_v2.0.0_210413_1030(v1.84)
BTV: BT.21.05.27.1500(C0:81:35:20:86:99)

Build ID: FF_8227L_11


I have asked the seller to send me an updated version and he sent me the 8227L_8乐旅UI05-国外11_v2_20220119 which as I have seen @Anton TNT you say it is slow? Would you be abe to say what my options would in terms of which firmware i could Install?
Yes it will work but if it says in firmware name that is android 10 it will be android 10 not 11. Find a best match on forum here or on 4PDA for Android 11.
For your device most likely EXTRONS firmware will work perfectly (but it's Android 10 not 11), just like in mine, they are similar devices but I don't know for yours mine device is DSP 10 IPS with phisical buttons MTK ac8227L chipset based.
Extrons branded firmware has a lot updates of applications that stock firmwares do not have, including amplifiers corrections, AC climate control etc.
All stuff depends also what kind of canbus device unit have.
As for XRC firmwares , DO NOT INSTALL any of my firmwares that I posted if your device has UI XRC, there is specially configured firmware just for that units, I saw this firmwares a couple a days ago on this forum. Just search newest posts by criteria "XRC 8227L".
If you have older machine that has phisical buttons, and device infotainment recognized device as TSKJ.xxx.xxxx - CHS.8227L_8_UI3or4_Android 10 or 11 is firmware for your device , but as always, you must find firmware for Android 11 or ask your seller to give you one.
If you choose to install firmware with Android 10 on pre-installed stock firmware with Android 11, I don't know what result would be after update, maybe it will ask you to activate device again.
 
Last edited:
  • Like
Reactions: jawss

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
So I have the xtrons TSD700L from Amazon. It says it's the FF-5000 and it's 8227l-10. Is there a firmware for this? And will new firmware help the sound at all. My biggest issue with this is that it seriously lacks bass and I can't do anything to fix it.
View attachment 5616655
Hi!

If you have DSP effects in factory settings (pin 8888 to enter) activate those by clicking on it and checking the box or set to value "1" and set AMP also to value "1"
 

kolios13

Member
Jul 5, 2013
8
3
Yes it will work but if it says in firmware name that is android 10 it will be android 10 not 11. Find a best match on forum here or on 4PDA for Android 11.
For your device most likely EXTRONS firmware will work perfectly (but it's Android 10 not 11), just like in mine, they are similar devices but I don't know for yours mine device is DSP 10 IPS with phisical buttons MTK ac8227L chipset based.
Extrons branded firmware has a lot updates of applications that stock firmwares do not have, including amplifiers corrections, AC climate control etc.
All stuff depends also what kind of canbus device unit have.
As for XRC firmwares , DO NOT INSTALL any of my firmwares that I posted if your device has UI XRC, there is specially configured firmware just for that units, I saw this firmwares a couple a days ago on this forum. Just search newest posts by criteria "XRC 8227L".
If you have older machine that has phisical buttons, and device infotainment recognized device as TSKJ.xxx.xxxx - CHS.8227L_8_UI3or4_Android 10 or 11 is firmware for your device , but as always, you must find firmware for Android 11 or ask your seller to give you one.
If you choose to install firmware with Android 10 on pre-installed stock firmware with Android 11, I don't know what result would be after update, maybe it will ask you to activate device again.
Thank you @Anton TNT for your reply. But I am a bit confused again. Would the EXTRONS firmware work or not in my device? I am sending you more details of the device I have:
SellerName: Uckazy
1653041660120.png

tLsG5gVfCkzFxSOpslYLEcKtX3PqjYWWdXMTKr6O0ZY8N_ucLiN9c8oVx6H3EoRx48cP2PbKhaZ-nlIyIDRMkpzkc8Vn_EyttxQaE9ObhEJDW-XACXf6-ZQ3DZbc2WxDVogzhr6tES0O04kLAx1bEUStB-qu5AqmvK-4z3LPRURHUprMKf2UDkNP2r-_ypHnHuEUY1Y5KNSsKcIVhvuO6ED0-F85GW8u1fFsV-j9ZqiacNkaPr1yyxzRfx4Wvt2mK6ttmO5mhBsFBfNxhGZu6MNV0YK-i2ttPhlYoqYOr2aH5UKJGHiImWVFDs75KYiUq9fG3EKu2Sqawo3251Kj_myY9q12XGuJyYEK5g7cT_AydD-tdxMAJ_SQMOk8LBkhtZM9RnZzNtiGFX4ZrDAzzH2DkJ4ooq1GyGwXgMbxL6a7TQXqCydZTBZyyEbVxMGUFMFDG86Iw3BGHusicEGu_rlKcnXdGpaUjzozFDVb5Oj7VOEZABnBjChJwCYC7wtxIS1yXC0uy63IEIEAvWRr--dfoVbUSyL3cra_OFI5dwPhx1gwdycys1HUtMe5SO0PEapndluvGBU0we6brvJGg3dMSSdYv__4nHI4qQI8i79F9zGd0M4Nr3wkHsxuUlc9GfCpmxsNZlsuaHB30gwXeKjVbEUHYE0lrzB2qIkL0wPjiYTyGTPEeKRL9gk1L1lV2RS6bSaX9gCXMqV72bgpr5SlVdS_IhmNP1QjOXL-8Uj0WbGQUdofnn-B9kQ=w3302-h1860-no

XlzoDdQlpDi2pNIVZoETGGFE-_bTeh-9vOGonlYMHOh7UErVnDy7WRqwGIVhQxvQ9xpnyzBcb4jvbyzqQAvwShiDUIGhfcEYbpWUKna0r-rJp5wfVEja8LedXBvyjkfF4l8Mzq6EE_28u3vPEOigWKOQPSXbbbxRaheHW5BYZgIgbTAGI5f3ouiSj5CtLr-aNgHBhUC1SYenPupUB4ViZMn54oqcPbo0XrZb2ntR4UiNvBIPy9dJiaX9DtWTI6WUrFeXNnMNcoko2aOVBZypzhdTvOMHEjU1-W3prq_Qyk1CJJULoeBUSNjN-XmHXBIT2JKHet62usC5Jfh8G0_r-NMqsrt-bct4EMNUbilVgRGdbC2NLh4IdkOi1sJUoe98vsaHvy3IlSAB6E9d08xGB8F1ZLgp-N979EUKyxGMo-HhrIJZhEBLKyPw3q7Fbo8vXygKa4bGsJ37hDj073F93gIGFDeS6kiQs_D94vC5RQdi90xYaA18NSTA18POINDz7itWBgfvsk6dh1eCWu5zwi7m9vSMkJWKZwOlQe9A54Pn660UIhWhdDlYIP8V0Hq9lqAB5MFmj-AWUchjlCuxRNtHNc8I2aLQK4giaTBBqGgfmvmwNi74wnmCOYXJddS-vhB43inhE8xvI0HH6NqwTxhJr744Ka8x2TMskh6QdoooH_mlC7SCTxql1eMTtwqwyiAkT_K9S6lqBE0PvLj2gCEEawPNq31RZkTys46WAw-lPa7czj2h4R-YeZc=w3302-h1860-no

af7cUEtl_AV_kPLjzDeJoNxqMhRZCtbej-jt_HZ99lwaoc9fH6kFhQafdRHJCrR6JiXvaMGZIAHZaFr8_MuUeebqSX42z1nt-nWT5TC7wbGycuSH4Sys1FW3o4iw18Wvisj4YBefKLV2KxE2yZWTfhE9Lp6ek5vEk10r3ishzMPGj-2sZpX3bp2boBwhODggLl0iUODTWOGJRH6MgClYD2uLULAtBpjW9ce8UMU8paL096yvhjWqo_RfnkV333_ogOncGx5aAGBIdN20nu2QuVpOLJMijUD6pv_FGj-s9Xo1aQDa3Vox7v3c3YhAYhJYb6uisMsXSUsB1gVvwXlk70LZL4DFowNU_ATf1voHLS9Q5D4Dmwuq6V3FbBHo1w4QO9jRSlfDf_u7HmIqks2AhWzsnTPtu_5e3_FMmL38t0miKA5xkK4OrFl9yv7PXjpsmp0NWbtnDzPbPN7qXKlyBdzlItgNcdNpAPiP4ffh0QPR8ZU_B3iMQ_ryW0z7Iayt3N7vVpGAQAHBPO8fu3-ytPQkb0NqkR3v1UZlq4d6lDtAYSPd_tswrUfwZceTxPuJQQBOERrDRwgPlg1pooZP-jChrDCEPOeLx6fbWSa0VJi2RpfvXVy5KILecBFKEsn8NjIw014_wzT1nICvK4lP7gzzKXw_6Xecljkc9WsDbEFfGbSOhmzpOHcGjNmW2Tic945T8pX7jFwsByfkZWwCf3U8-MPyGN_ayhkU9cHckNGqa4wMCBFIjD2ksR4=w3302-h1860-no

y0wVVqTW33JIz5fPwuv8BxhJVav0Oje0DCm9amlVBmE6eRCknT-wM1TzZMdXdBqC4YvO2viS-2HTkgpMkjWfuIrqQ-S0nDQLHn01m_WRQRTeOKMnQDWVcooe90CNetQH8nlA60EMXPGbyeuCAO6fhP2B-YAu7_Tj3pMED5Tu66JVUp3hGjmme-ojwf66MeM1ic0XSYPsF_F2mhevT0HkkqpQ90gu47i_BFtKKLWt_p0QpguTm6ZrO1jKnmEXWmWE2zCKT_so2X_py5sfjQzk_L5YsjfoN2_UalMAlEMtmCJ6WP_vvp7pZShavQyBxZbnQOFjiEfbOV0f5WNwZpyIpfgV59fa77Q-1UsZpMgtPQJuqgMz5rRU8oevabAx2yzdSlbjW-db5t9R66UA3WKcmBpdOIFsbJ2zqrg2lVVMhbxmNRt4B3o6-jHufpg05ssmjlQeXZEcan5Zs4MoEnLGgf6-b-XT247FhDquxV2QTCYfSUgpjefmmJMgnRHUsAC93dLgZ3Qy7MdVBBlb5QZkvsD_0w29Ln5EBfgpzoZV4Odu9Dcwe2-mPM6afIZ3ynM4rq4BkWecGcGTgY1sg38FmAocSDlowBfC6_A6oqy8flRkWpl3BQlBx4yYSI2qdncvRQFmGniJOISq-Zy6ZNvUNCJuW6x166q5sfMViiHtl6pFTm0X7iVQOdfpMcSSJXanTOyJPqMmxknonrzO97dk-7Q56M2H65SCU2rcoBt7YOripz6AaSD70pQEIoA=w3302-h1860-no
 

Attachments

  • 1653041462435.png
    1653041462435.png
    390.3 KB · Views: 61
  • Like
Reactions: Tonevregs

kolios13

Member
Jul 5, 2013
8
3
It will but you said you have Android 11 and softwares are for Android 10, did you read any of content I wrote earlier?
I am sorry @Anton TNT I did not intend to offend you. I would appreciate if you could help me clarify this out. I have understood from your wording that probably it is ok to install EXTRONS firmware (but it is Android 10). However you wrote afterwards "As for XRC firmwares , DO NOT INSTALL any of my firmwares that I posted if your device has UI XRC".

As I have posted my device has HMI: XRCH.D.O.F.3.01.2021.07.05.09.30.

Does this mean my device is XRC firmware and I should "DO NOT INSTALL any of my firmwares that I posted if your device has UI XRC"?
 

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
I am sorry @Anton TNT I did not intend to offend you. I would appreciate if you could help me clarify this out. I have understood from your wording that probably it is ok to install EXTRONS firmware (but it is Android 10). However you wrote afterwards "As for XRC firmwares , DO NOT INSTALL any of my firmwares that I posted if your device has UI XRC".

As I have posted my device has HMI: XRCH.D.O.F.3.01.2021.07.05.09.30.

Does this mean my device is XRC firmware and I should "DO NOT INSTALL any of my firmwares that I posted if your device has UI XRC"?
Yes my firmwares posted are for TSKJ, JC and other UI's , do not install these but find XRCH firmwares on forum like it is said, search for xrch and 8227L criteria, and install those.
No offense is taken, it's ok!
 
Last edited:
  • Like
Reactions: Tonevregs

kolios13

Member
Jul 5, 2013
8
3
Yes my firmwares posted are for TSKJ, JC and other UI's , do not install these but find XRCH firmwares on forum like it is said, search for xrch and 8227L criteria, and install those.
No offense is taken, it's ok!
So I have installed the firmware the chinese seller provided me (8227L_8乐旅UI05-国外11_v2_20220119). Before installing the new firmware I have noticed that it is not Android 11 but Android 8.1 Oreo (as it is discussed again in this forum). I have updated the firmware, it is a little bit more fast but now I have other problems.

1. It says "Activation code does not much"
2. The volume up and volume down button in the wheel cannot be mapped.

In addition the HMI now has changed to: SHLL.D.O.F.3.05.2022.01.19.15.30(Error)

GZgmIlYAsi4KVSyMDJXJBspWVnTItKi1zrzShHd9g4E27MKvuXMT2BMo1dQm3kLIMqfaJ-N9BXBLp2cI1dC29yTgL_G4fXsHcFFa2KA4N60mA1hWs5SPTCsBhRyJsFgCytTlcB3lB96seVgEjE-pttvHJPb_gempdYUEAYOa4eiwnDEXlscbxJyDoqcM0cRKjf3oFfYCjEHrzXiHgujoF3cQnu-7NpZDWGPt210vGix2RJmAnmXrxp3pea8DaKkrYdv9BMyTnd0b1iZpwoBy1kkhgMQBbWLOw_cTLZCIHJqE_QbswYDdfXeqDOBCH62OxNQXaykjWqhiueqGO3T7a7SGkfUFtW9gTVZxRtvsT9eZN_beNz4W7VZQtGmLuAIXL5PgY2RvLpshOUH50MI0RSwj4jDa88RF9cWucgzJjhQpZwef623vEvZbQOTLXvNxaDxaX358TwK3s-ixBGT8SRPqtubALJJT4E6WA58pSzPnVrp2TthA1MnoGgO9sg1FaWx2U795XaIbIKg-siUAV6yWVwIeK7SEpkuxhZIh0ZqtoJYL1MXCTLMyp2X-JU86YwSYgRnWV-vwKDBw7pqgnmtsjdCMAkP2aZX-8aruM8YPJo61jEvj3GUb3iSUKORPCpAOCnAAAN4RZ25zQ6cu-p7M3Vy1IFBniQsrFmiPuIEGf_m3C5dYSzocpuuoYmX1-Ki8s9tt7ByWJ1ynknWA6zkD-Fym6cf1eoAntCIRYBl3JRYMwRS6LMFJpLE=w3302-h1860-no
 

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
So I have installed the firmware the chinese seller provided me (8227L_8乐旅UI05-国外11_v2_20220119). Before installing the new firmware I have noticed that it is not Android 11 but Android 8.1 Oreo (as it is discussed again in this forum). I have updated the firmware, it is a little bit more fast but now I have other problems.

1. It says "Activation code does not much"
2. The volume up and volume down button in the wheel cannot be mapped.

In addition the HMI now has changed to: SHLL.D.O.F.3.05.2022.01.19.15.30(Error)

GZgmIlYAsi4KVSyMDJXJBspWVnTItKi1zrzShHd9g4E27MKvuXMT2BMo1dQm3kLIMqfaJ-N9BXBLp2cI1dC29yTgL_G4fXsHcFFa2KA4N60mA1hWs5SPTCsBhRyJsFgCytTlcB3lB96seVgEjE-pttvHJPb_gempdYUEAYOa4eiwnDEXlscbxJyDoqcM0cRKjf3oFfYCjEHrzXiHgujoF3cQnu-7NpZDWGPt210vGix2RJmAnmXrxp3pea8DaKkrYdv9BMyTnd0b1iZpwoBy1kkhgMQBbWLOw_cTLZCIHJqE_QbswYDdfXeqDOBCH62OxNQXaykjWqhiueqGO3T7a7SGkfUFtW9gTVZxRtvsT9eZN_beNz4W7VZQtGmLuAIXL5PgY2RvLpshOUH50MI0RSwj4jDa88RF9cWucgzJjhQpZwef623vEvZbQOTLXvNxaDxaX358TwK3s-ixBGT8SRPqtubALJJT4E6WA58pSzPnVrp2TthA1MnoGgO9sg1FaWx2U795XaIbIKg-siUAV6yWVwIeK7SEpkuxhZIh0ZqtoJYL1MXCTLMyp2X-JU86YwSYgRnWV-vwKDBw7pqgnmtsjdCMAkP2aZX-8aruM8YPJo61jEvj3GUb3iSUKORPCpAOCnAAAN4RZ25zQ6cu-p7M3Vy1IFBniQsrFmiPuIEGf_m3C5dYSzocpuuoYmX1-Ki8s9tt7ByWJ1ynknWA6zkD-Fym6cf1eoAntCIRYBl3JRYMwRS6LMFJpLE=w3302-h1860-no
This is not your device firmware at all, you installed wrong update (and given to you by Chinese seller), find something to update on this forum, type in "XRCH 8227L XONRICH JUNSUN WITSON" and search or use this update to correct activation code:
https://mega.nz/file/ZhklkRpa#8g4I61welZ-F6WYcQFFWLv8wfqngxjreTh3wYwBSjkQ
 
Last edited:

Anton TNT

Senior Member
Sep 24, 2020
1,339
240
Croatia
Android Automotive OS
So my AMP is set to 1, but when I change over to DSP no audio comes through. I have all the DSP options but no sound.
Does it play or do you hear something without DSP on ? If so deactivate DSP effects.
Also I reccomend to check your wires for sound/speakers (green/grey/white/purple - see or find wiring diagram - see if they are damaged in any way).
If still no sound update with new firmware - ask seller to provide you with newest update - latest are 2021-07.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    THIS IS THE LATEST PATCH / UPDATE for 8227L units dated 2023/07/14
    I uploaded it and shared here for downloads.

    https://terabox.com/s/1JSZCCoTvF4lTuQ3XYCMsOg

    Enjoy everyone.
    2
    Thank you very much, but it doesn't work. Reactivate only the volume knobs and move forward. But remove the volume, the other buttons do not work and change the language to Italian. At least we confirmed that I need the correct button file. Thank you so much.
    1
    @Anton TNT

    Oh no sorry I installed and APK from UI8 that change it to bmw interface, but in 8888 menu I restare it to stock share actual stock HMI, when I try to install the update you shrared, error message, (Check usb or files) appear. I dont have MCU file in the USB, don't know correct mcu file.

    Can't contact seller, HU buyed by second hand


    View attachment 6081853
    So it is JUNSUN HMI JC...
    Download firmware that suits your machine from this link
    https://drive.google.com/drive/folders/1Uv5qe034wTpLRaY3PtRjcdvrHnP2naKC
    then unzip two files (xxx.img and xxx.upd) and put them on empty formatted USB disk and then connect that USB disk to a port on head unit, then start car and follow procedure , unit will start updating automatically if USB disk is recognized. Wait till procedure completes and then remove USB disk from port.
    1
    Mod edit - translated by https://translate.google.com/. Oswald Boelcke, Senior Moderator.
    Hi, I have a problem with this car radio. In practice, if I disconnect the power cable of the car radio or simply disconnect the battery, the odometer of my Ford Fiesta becomes in miles instead of km and I can't even change it in car info because it won't let me select the km. Every time I have to reconnect the original car radio to reset the km to zero.
    *********************************
    Salve, ho un problema con questa autoradio. In pratica se scollego il cavo di alimentazione dell'autoradio o semplicemente stacco la batteria, il contachilometri della mia Ford Fiesta diventa in miglia invece che in km e non posso nemmeno modificarlo in car info perché non mi fa selezionare i km. .Ogni volta devo ricollegare l'autoradio originale per azzerare i km.
    Hello and good afternoon, @ptgiuseppe Welcome to XDA! I hope you'll always get the support you require and have enjoyable times on our platform.

    However, as a one-time courtesy for I've translated your above quoted post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Italian posts.
    4. Use the English language.
    We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.

    Regards
    Oswald Boelcke
    Senior Moderator
    1
    I have tested these files and they make some buttons work with different functions than the original ones. No idea about modifying the function with the program.
    you can try learning the buttons with touch study menu in factory settings, it might set up correctly some buttons
  • 7

    LAUNCHERS FOR MTK AC8227L_8 (Alps FF5000 , JUNSUN V1)​

    Theme 1.0 apk to change between the launchers​

    ( DO NOT WORK WITH alps ac8227L_demo XYAUTO )
    6
    freeman94 , Samvel72, JIm_stos


    Ooookaaay.
    Let's put this issues and miseries with old units aside and solve this.

    So many of you have problems with restarting unit / self erasing unit at boot, due to self loading Google services and updating on their own (which in next restart erases all memory /state config and sets to default factory settings).
    So here is a fact. Google updates it self and its services as soon you connect unit to internet it takes a while a few minutes but you can see progress in status bar when updating.
    When Google update specific GOOGLE SERVICES (app responsible for all Google apps that are connectd with google) sometimes updates fails and Google services is not same lately version (check for that in car settings/ app settings / Google servies app or Google). When updating and setting owner of device - Google account - fails whole system fails.

    Here is a partial solution to try and test for various units with 8227 chipsets.
    I have old 8227L unit home and have succesfully managed to reinstall Playstore and G services but if this will help to solve issues with erasing / restarting we will see on your units!

    - Detach all usb drives or sd cards attached from unit for now.

    - Go to root directory (use file manager default app or File manager+ app, if device not rooted use second app) and find leftoovers of instalations from Google :
    - files like Google folders with no data relevant to system and folder CACHE - delete all !
    - delete non essential files and folders (only Android folder must remain along with Music folder and importantly navigation software folders) , logs and settings.ini , factory_settings.ini files etc.

    - DELETE CACHE MEMORY of every single Google services that are in APPS menu (DO NOT DELETE DATA, only CACHE memory of apps)

    - next step is to disable Google and its services so system cannot update them when unit is connected to internet or online

    - while Google and services disabled - download this file https://drive.google.com/file/d/1pnqyE9PQg8rn8gSSm7GfE-Zgghu3YGAw/view?usp=sharing from laptop or PC (playstore latest) and transfer it to unit on root directory and install from there (activate third party software installation permission - give permission - if unit fails to install)

    - remove USB drives or SD cards from system so that system cannot write on USB memory or SD card instead of main unit memory

    - ENABLE google and its services again

    - when new playstore apk installed, enter playstore and connect unit to internet, let it update by itself or update Google and Google services manually - do not restart unit untill finished all!

    - set your desired Google account (tweek all in Google menu of car settings) and connect to your account

    - set everything else - icon arrangment , radio stations, wallpapers, install desired apps etc.

    - now for restart of unit and saving new state to a unit memory :

    - go to factory settings with pin 8888 - then go to other menu where setting MEMORY/LAST STATE OPTION IS ENABLE THAT OPTION - MUST BE ON
    - FIND OPTION INSTALL AND PROTECTION - INSTALL must be ON or value 1 PROTECTION must be OFF or value 0 , AUTOLINK option if exist turn to ON, MCU option set to value 1, dithering option set to value 1 or ON, Bluetooth ver (version) option set to 4
    - Bluetooth SYNCH option must be ON or value SYNCH , not ASYNCH
    - return on main menu of factory settings and enter one (I don't know what is called in your unit) that looks like USB drive picture -> drive / memory picture - press it , it will say (if no USB drives and SD cards attached) failed to save memory or someting like that , which is good , it means that it will write memory on units main memory instead of external drives (if USB drive or SD card is in place after reboot deletes all files and replaces them from actuial ones in external drives and then sets default factory settings again and loses everything)
    - close factory settings window as process (do not hit SAVE button on upper right corner - it will restart and lose all settings and tweeks again)
    - go to car settings / about unit or system info (till you see pad where you type in pin for factory settings) and enter code 1414, unit will shutdown ad save last state that you configured (untill successfull boot USB drives or SD cards must be detached from unit !)
    - after bootup when in Android test everything and enter playstore - if your account is still set and is working you have now fully working unit, try rebooting a few times with code 1414 and see if problems will occur again


    And that's it ! Hope this bible text wil help you guys.
    Report here is someone succesfully fixed the unit.

    Fingers crossed.
    I managed to install Google Play services this is Android 8.1. (See the instructions above) Bluetooth errors are gone, the device is working fine. I disconnected the USB drive, reset the device and installed programs without turning on Wi-fi.
    First installed
    Google Play services
    Google Play Store
    Speech Services by Google
    after that, I turned on the Internet and updated all applications. Try it and you should succeed. Thanks Anton TNT
    5
    ALL USERS - NOTE !!!!

    Due to high demand of firmware and problems that came with it I'm officially making a new website just for HEADUNITS with 8227L based firmware and support. (for easy Google tracking and finding all in one place)

    STAY TUNED , will paste link here.

    (this thread IS to be opened for future problems and will be opened for help each other)

    SO... READ THIS...

    - new website will be for all devices with 8227L, AC8227L based chipset devices
    - there will be all files and updates inculding help & support that I collected (and future updates also) in these two years of having and testing my car multimedia device ALPS FF5000 (also includes units MEKEDE,JUNSUN,HIZPO, etc. - with 8227L based chips inside)
    - on this website will be a E-mail form or teamviewer or TEAMS connections directly to users that needs help with device (requiring a user to connect their device to active internet connection - on laptop, PC even in a car and with active connection and teamviever apk installed in units, etc.)
    - MODS installing, flashing and brick recovery is not an option yet as I haven't tried that yet, but will in future (must do root for my device for some settings to enter like travel computer and test more)
    - all people with similar problems of their head units will be more than welcome to participate and help each other in this website

    Cheers to anyone who want to be a part of this and participate and greetings to all...
    5
    1. I installed this firmware - FL-PSA&PSP-2+32 安卓12.0- 8227L_8乐佳UI03-国外12_v4_20230216 - it has best UI theme for me
    2. I disabled GMS and google play store.
    3. I installed this gms package - Google Play services_23.30.13 (100400-552628474)_Apkpure
    4. I installed FIRST google play store update - it's update chinese store v17.x.x. to official google store v29.x.x - com.android.vending_29.4.13-21_0_PR_429618493-82941310_minAPI21(armeabi-v7a)(nodpi)_apkmirror.com
    5. I installed SECOND google play store update - it's update play store v29 to latest v36 version - Google Play Store_36.8.23-29 [0] [PR] 550933253_Apkpure
    6. After that I connected my USB LTE stick and update one by one - google maps, chrome, voice services and yt
    7. Taa dam - all works beatifull, even screen mirroring

    I can share installation files here if anyone wants to reproduce this procedure.
    3
    MOD TRANSLATION
    "Good evening everyone. I have this unbranded unit for FIAT DOBLO' 2015. I updated everything with a file purchased on the net, but since then the whole screen has changed with new graphics, it crashes continuously and I can't connect to bluetooth it keeps detaching .
    Could you kindly point me to an update posted later that restores my device? Thanks, I hope your help."
    ATTACHED IMAGES
    ***************************************
    Buonasera a tutti. Possiedo questa unità senza marca per FIAT DOBLO' 2015. Ho aggiornato il tutto con un file acquistato in rete, ma da allora è cambiata tutta la schermata con una nuova grafica, si blocca di continuo e non riesco a collegarmi al bluetooth si distacca di continuo.
    potreste indicarmi gentilmente un aggiornamento da poi postato che ripristini il mio apparato? Grazie spero in un vostro aiuto.
    MOD TRANSLATION
    "Sorry but my model is a 8227L FF-5000!!!!
    Because I have to spin another thread"
    ****************************************************
    Scusa, ma il mio modello è un 8227L FF-5000 !!!!
    Perchè devo girare un altro thread
    MOD TRANSLATION
    "What update can I perform?
    Thanks help me!!!"
    ***********************************
    Quale aggiornamento posso eseguire?
    Grazie aiutatemi!!!

    @Mastef76, As per Forum Rule 4 (quoted below) -- that you just agreed to when you first registered your account -- in the future please only use English when posting (just as @bkerekes69 suggested); feel free to include your original message under the English message if you wish. If you do not know English, I encourage you to use any of the resources in the quote below. Your posts has been translated as a one-time courtesy.

    simplepinoi177 FSM (Forum Specific Moderator)
    4. Use the English language.

    We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ , https://www.babelfish.com/ or https://fanyi.baidu.com/#auto/en or use one of your choice.