Nienales na aliexpressneviem gdze sukac
Hi,
To get all info about your RADIO you should check this forum:
https://4pda.ru/forum/index.php?s=&showtopic=522762
Use google translator
Last edited:
I know this is an old thread. I have an AN21U silver variant. I thought I was upgrading the software but install the wrong files on my radio. The touch location is off. If you touch a button on the left side it work correctly. The farther you go to the right it is off. I think I have loaded the wrong resolution ? Any suggestions would be helpful.
Greg
Greg
Hi guys.
I'm very happy to write here in this forum, place where I've learnt many things from Samsung S1 and other devices... No words could praise XDA.
But I'm sad too, beacuse I need your help with this car audio system.
I have tried to gain root privileges, but... I cannot say exactly what happened, now the system is still unrooted and I've lost 2 features.
Wifi DHCP ! :silly: Yes, with statics ip it goes :laugh:... strangenesses of life (and let me say that this feature I could forget, I'm not so interested to restore it).
The second trouble is more damned. Bluetooth. COLLAPSED.
It seems enabled, other devices can list my car audio, but no way to pair. If I try with a phone, it simply doesn't ask for authentication pin, neither car audio asks anything.
If I go to blueetooth settings in Android menu, I cannot do anything. I cannot flush data. I cannot search for devices.
If I go to native "Bluetooth app" for calls, settings are blank. If I set them, when I change menu and return, they are blank again.
I 've tried to made a factory reset, but nothing happens. I've tried with "bluetooth debuggers app" but no results.
I cannot go in recovery mode (HOW ? Is it possible that I haven't found the correct procedure? ) to wipe data out and reconfigure all the system.
I've tried to upload an old firmware (why old? because I've installed the 2.9.4 and 1024 resolution... I've not found the 2.9.5 for 1024), but the files are ignored: at boot the system says UPGRADE START and instantly after UPGRADE END.... ignored. Probably beacuse is an old version?
Any ideas to restore my bluetooth? If I plug a bluetooth dongle in the usb port behind?
Thanks
I'm very happy to write here in this forum, place where I've learnt many things from Samsung S1 and other devices... No words could praise XDA.
But I'm sad too, beacuse I need your help with this car audio system.
I have tried to gain root privileges, but... I cannot say exactly what happened, now the system is still unrooted and I've lost 2 features.
Wifi DHCP ! :silly: Yes, with statics ip it goes :laugh:... strangenesses of life (and let me say that this feature I could forget, I'm not so interested to restore it).
The second trouble is more damned. Bluetooth. COLLAPSED.
It seems enabled, other devices can list my car audio, but no way to pair. If I try with a phone, it simply doesn't ask for authentication pin, neither car audio asks anything.
If I go to blueetooth settings in Android menu, I cannot do anything. I cannot flush data. I cannot search for devices.
If I go to native "Bluetooth app" for calls, settings are blank. If I set them, when I change menu and return, they are blank again.
I 've tried to made a factory reset, but nothing happens. I've tried with "bluetooth debuggers app" but no results.
I cannot go in recovery mode (HOW ? Is it possible that I haven't found the correct procedure? ) to wipe data out and reconfigure all the system.
I've tried to upload an old firmware (why old? because I've installed the 2.9.4 and 1024 resolution... I've not found the 2.9.5 for 1024), but the files are ignored: at boot the system says UPGRADE START and instantly after UPGRADE END.... ignored. Probably beacuse is an old version?
Any ideas to restore my bluetooth? If I plug a bluetooth dongle in the usb port behind?
Thanks
Last edited:
Hi Guys,
Im currently in posession of an AN-21U type radio, see pictures. Unfortunately, the Android environment has crashed as can be seen. When you turn on the device, the radio works but the device displays the rotation Android logo.
I've tried every possible button combination and every possible firmware version, but whenever an SD-card with standard firmware is inserted and the reset button is pressed for a while, the device boots, displays "Update Start", then immediately "Update End" and nothing else.
Can anyone guide me in the right direction on how to repair this device?
Thanks in advance,
Im currently in posession of an AN-21U type radio, see pictures. Unfortunately, the Android environment has crashed as can be seen. When you turn on the device, the radio works but the device displays the rotation Android logo.
I've tried every possible button combination and every possible firmware version, but whenever an SD-card with standard firmware is inserted and the reset button is pressed for a while, the device boots, displays "Update Start", then immediately "Update End" and nothing else.
Can anyone guide me in the right direction on how to repair this device?
Thanks in advance,
Attachments
Hi,
What CPU and display resolution are there?
Wysłane z mojego C1-U02 przy użyciu Tapatalka
No clue, the device information is not accessible as the firmware has crashed. The device has no markings on the outside indicating CPU/resolution.
Help please..
My unit experienced bootloop, so I flashed redmod, and then did a factory reset after flashed redmod. Now I don't see the navigation app... but the redmod suppose to come with IQ navi?
what did I do wrong?
My unit experienced bootloop, so I flashed redmod, and then did a factory reset after flashed redmod. Now I don't see the navigation app... but the redmod suppose to come with IQ navi?
what did I do wrong?
Hi,
Try to install new firmware.
Copy two files to SD card.
Hope it will help.
If you do not have update files send me PM.
Wysłane z mojego C1-U02 przy użyciu Tapatalka
---------- Post added at 03:30 PM ---------- Previous post was at 03:24 PM ----------
Hi,
It looks like you installed IQ Navi version firmware.
There's other version available to download also.
Wysłane z mojego C1-U02 przy użyciu Tapatalka
thanks, I installed 2.9.5 but encountered the UI unauthorized error... so I installed the redmod. do you mind point me to the firmware has the navigation app and no "UI unauthorized" error?
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
39"AN-21 U" - Unbranded 6.2" 2 DIN Pure Android 4.1 Car Stereo Radio Head Unit [ROOTED]
"AN-21 U" - Unbranded 6.2" 2 DIN Pure Android 4.1 Car Stereo Radio Head Unit
To avoid confusion, below is a picture of the unit this thread relates to.
I am aware of a previous unit using the same design, but it runs an older version of Android. This thread is for the unit running 4.1 as standard.
Specification / Features
Hardware
CPU: ARM Cortex A9 MST786 Dual Core 1GHz
GPU: Mali-400 MP
RAM: SKHYNIX 1G DDR3 RAM H5TQ4G83AFR
iNAND: SanDisk 8GB SD1N5C2-8G (1GB system storage, 6GB internal USB storage)
MCU: STM8AH ST
Bluetooth: BlueCore5 CSR
Screen: Capacitive 800*480
GPS: SiRF Atlas V GPS Processor
Radio: Philips TEF6624
Sound Effect Processor: BD37534 ROHM
Outputs: 4x 45w outputs, Toshiba TB2929
Additional Outputs: 1x Subwoofer, 4x pre-outs
Microphone: Built in microphone
Supported Features
Bluetooth connection to phone for calls.
WiFi and 3G dongles. These must be plugged in before turning the device on, and are not hot-swappable.
Compatible 3G Dongles
- ZTE MF190 Clone (Qualcomm MSM6280 + RTR6280)
- Huawei E171 (Qualcomm MSM6290)
- Huawei E180
- Huawei E261
- Huawei E1752
Non-Compatible 3G Dongles
- Generic Orange/Black eBay dongle (Qualcomm MSM6280 + RTR6275)
- Huawei E220
- Huawei E352
- Huawei E367
Connection of multiple USB devices through a USB hub, including wireless keyboards, USB memory sticks, and wireless dongles. These types of devices are hot-swappable.
Multiple USB memory sticks can be plugged in. They mount at "mnt/usb/sda1", "mnt/usb/sdb1", and so on. The limit is not known, three have been tested at once.
Wiki Page
This unit has a very useful Wiki page with a lot of good information.
Tonghai Create AN-21 U Wiki
It would be really appreciated if before posting any questions, you take a read of it, this main post, watch the video review, or do a search of this thread to avoid any repeats.
Video Review
Other videos showing specific features are also available on my channel.
News
2014.01.20Download links and bugs section updated.
2013.12.05Root is now possible.
Previous News
File Repository
This site has links to most of the files in this thread, including firmware and MCUs.
Android 4.1 Car Stereo File Repository
All files are of course used at your own risk.
Firmware Updates
To update the unit, extract the update files from the downloaded RAR and copy them to a MicroSD Card, insert the card, go to Settings -> General Settings -> System Update or turn the unit on whilst holding down the 'Menu' and 'Volume' buttons until the update starts.
System Version 2.7.29
Mirror 1 - Click here
Previous Versions
"4.2.2" Versions
Changelog (Unofficial)
System Version 2.7.29
- Unknown
Bugs / Issues
KeyUnresolved
Workaround
Resolved
Updated 2014.01.20Newest issues will be put at the top, solved issues, or issues with workarounds will be moved to the bottom.
Unable to remove applications that are device administrators without factory reset due to security menu being disabled.
Many applications are unable to "see" the MicroSD card, so the choice of music players is limited. The mount point is "mnt/usb/mmcblk1p1".
Despite selecting "Front Speakers Only" for navigation sound, the sound comes out of the rear speakers too. Setting to "Front Right" appears to work correctly.
Bluetooth is restricted to phones only. (Unsure if this is hardware or software related, talking to manufacturer suggests hardware limitation).
Bluetooth dongles do not work.
There is a "pop" from the speakers sometimes when changing applications that control sound, this is extremely obvious if you have a subwoofer installed. It happens when the unit is turned on, and when going from mute, to a volume level.
Screen brightness when buttons illuminated is not user-configurable. This means it may be too bright or dark depending on the conditions. For example, when it is only mildly dark outside, and you have your lights on, the screen is very hard to see.
Workaround: Enable constant illumination from the "Extra Settings" menu by setting the option to "CLOSE", this will set the keys to always illuminate. Then use an application such as Twlight to control the screen brightness based on sunset and sunrise.
Random issue when downloading large applications. The progress will usually get to more than 50%, and then no progress is made.
Workaround: The only fix I have found so far is to stop the download, reboot the unit, start the download, and repeat until download continues. It should download from where you cancelled. This appears to be caused by a limited download cache size.
Steering wheel controls only work with default applications.
Resolved: Open the radio (this does not appear to work with the music app), then hold the back arrow in the bottom right hand corner, the app will close, allowing steering wheel controls to function with other apps.
Most recent default application always opens on boot and continues to play, even if paused. This includes the radio, music, video, and iPod applications.
Resolved: Open the radio (this does not appear to work with the music app), then hold the back arrow in the bottom right hand corner, the app will close, and no default app will open on boot.
USB Debugging is password protected.
Resolved: The password is "[email protected]". Credit to @nikko82
Screenshot feature does not work, when trying to save the screenshot, a save error appears.
Resolved: This is solved in system version 2.6.60.
Root
Root is now possible thanks to help from some great XDA members.
Credits to @WonderEkin for the Root My AN-21 U app and @bmj67 for supplying SettingsProvider.apk
2014.06.06 - A new rooting tool named Baidu Root has been added to the repository. You can use this tool as an alternative to following the guide below.
Files required
Root My AN-21 U - [ Mirror1 | Mirror2 ]
Root My AN-21 U has been updated since this video was taken, the app should now correctly show "Step 2".
- Download the required files above.
- Install Android Terminal Emulator on your unit.
- Open the AUX application and close it.
- Install Root My AN-21 U and create a link on the homescreen.
- Run Root My AN-21 U and press the "Step 1" button.
- Reboot the unit.
- Once the unit has rebooted the screen will likely be black, press the Home button to display the homescreen.
- Run Root My AN-21 U and press the "Step 2" button.
- Reboot the unit.
- Open Android Terminal Emulator and run the following commands.
Code:su rm /data/local.prop - Reboot the unit.
FAQ
Can I root this unit?HELP! My unit is stuck in a boot-loop!Can I use Bluetooth OBD devices with Torque?Does it have the full Play Store?What is the boot time?Where can I buy one?How good is the radio?Is there a Wiki page?What is the USB Debugging password?What is the Factory Reset / Developer Options password?What is the Extra Settings password?13Skinning/Modding AN21 system apps
For all people who are interested to "skin" their AN21-U, I'd like to post some of my customizations:
In general, it is super easy to change the appearance of the AN21 apps. Some experience with XML-based layouting programming languages such as Android, Java or WPF makes life easier but is not mandatory. I attached a detailed HOWTO below...
A few words about my design thoughts: I tried to combine the red-themed flat style of the new Golf 7 infotainment system with Android JellyBean look&feel. Due to my blue temperature displays (-> first picture) I tried to reuse the same blue color in all system apps:
Great VW boot animation, downloadable at i-cartech-forum.tk. Credit goes to raabi (YouTube video)
View attachment 2617927
ADW launcher with Car Widget & custom background
Custom status bar without soft buttons (SystemUI.apk)
Radio app: side note - even Radiotext is supported with this unit (not very common with chinese headunits)
Equalizer, Zone settings
Equalizer, Faders
View attachment 2569467
Phone app; I tried to use as much space as possible to avoid line breaks within contacts like in the factory design
Phone app; Dialer
I use Poweramp instead of the Music app; looks a lot fancier with the album covers
Parking sensors (service app): I changed the car top view, colors and I also modified the smali code to display the range of my parking sensors correctly (outer sensors have less range than center sensors)
HOWTO: Mod/Skin system applications
Requires root access
1.) Download apktool
2.) Extract it to your hard disk
3.) Copy the system app to modify (*.apk) from /system/app to an external USB stick
5.) Copy the apk file to the location of apktool
4.) Copy the apk to a different backup location (in case that something goes wrong)
6.) Open command line and navigate to the location of apktool
7.) Enter apktool d systemapp.apk (this will decompile the system app)
8.) Change Icons and image resources (located in res/drawable-mdpi)
9.) Change application layout (located in res/layout)
10.) Rebuild the app by entering apktool b systemapp systemapp_MODDED.apk
!!!
IMPORTANT STEPS (otherwise the modded app won't work on the unit):
11.) Open the original systemapp.apk with a ZIP tool (such as 7zip) and extract AndroidManifest.xml and the META-INF folder to your hard disk
12.) Open your newly generated app (systemapp_MODDED.apk) with a ZIP tool and drag AndroidManifest.xml and the META-INF folder to your app archive
!!!
12.) Copy the systemapp_MODDED.apk back to your USB stick
13.) Rename it back to systemapp.apk
14.) Use RootBrowser on your unit to copy your modded systemapp.apk from the USB stick to /system/app/
DONE!
Those steps sound more complicated as they are. If you get some practise in modifying apps it actually takes about 1 minute...
You can also use ADB over WIFI for grabbing and copying the system apps; In that case you have to ensure that you remount the /system partition as Read/Write (rw).
EDITING THE SERVICE APP:
Please be careful with editing the com.tw.service_a5a4.apk since this app handles all the communication with the MCU (so nearly everything). Coding mistakes will potentially cause constant crashes of the app, causing a modal popup to appear, which makes it nearly impossible to interact with the Android system then. I nearly destroyed my firmware with such a carelessness -> the only possibility then is to reflash a factory image. So please be careful, especially with this app.13After a while something new from my side:
I modded the system apps of 2.8.7 to look a bit more like Google's "material design" to harmonize better with current apps. In my opinion the chinese developers tend to add to much of everything, especially glossy buttons
Anyway, here is the SystemUI with a thinner status bar without buttons and with white icons + text:
Radio app:
I actually like the layout of the Radio app.
Moreover, I modified the smali code so that the radiotext always appears centered (that annoyed me a lot ):
The Equalizer:
And the Phone app:
View attachment 3020346
If someone is interested in the APKs, find them attached. Simply copy the files into system/app and get the permissions right (or use RootBrowser for copying).
BTW: Does anyone have the link to the post which described how to modify the phone app to display the contacts in alphabetical order? I know that there was a post in this thread, because I did that once (I think it was written by Nikko). However, I wasn't able to find the post with the forum search.11MCU naming scheme
Ok here it goes... by disassembling one of the system files from 2.7.11, this is what I found:
DISCLAIMER: This does not mean, that you can change the features in the MCU firmware by renaming the .zip files. You can change how they are presented in the model choose list, but the firmware will remain the same.
This is purely for informational purpose, about how to identify the various .zip files. I take no responsibility for the accuracy of this information - Viewer Discretion Is Advised as they say.
... and before you ask - I don't know what all the features mean or do. The strings are copied from the source.
Model Choose:
/Miwer
Edits:
31-07-2014 - Added information about BlueCore6 module. Minor layout change10USB debugging password
Hello,
This is my first post here. I just received my unit, which I think is the same as discussed here, two days ago. I have discovered the password for USB-debugging, and as far as I can tell no one has posted that before. The password is "[email protected]".
