If I remember correctly, 3 UI's are included. I personally use the third one. Looks really nice and clean.
Android 10 K2001Q T3 head unit update
- Thread starter kavirz
- Start date
-
- Tags
- android 10 k2001 t3l
I have tested it with 1205 (assume it is 1.2.05) and it works. Got it from a supplier. Never tested the newer version
This is sleep functionality. I have not tested to see power usage when device is set on sleep (Bottom 3 options). If you use the vehicle everyday, then sleep works well as it keeps radio in sleep while parked off and when you start the car again, it will swtich straight into menu instead of taking 30 seconds to boot up.
Excepto MCUVER ,el resto sigue siendo igual a lo reportado por kavirz, cuáles son los cambios? Y donde lo conseguiste
¡¡Hola!! hoy lo logré con la apk de pantalla dividida.
por si a alguien le interesa.
por si a alguien le interesa.
It should update if you get the correct one that I posted earlier. Name it update.zip and put it on a flash drive. It should update with no problems. Does it show an error.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
1Hi everyone,
I took backup of the update.zip file in my head unit, it is reported as 1024x600
I believe someone was asking for a ROM for this resolution, so I have uploaded it to: https://drive.google.com/drive/folders/1fe66smMDZJeS--cQ-XNCBvxtXihClm2V?usp=sharing
This is the info on this version:
Software version v.22.08.09A_3.0(15:15) (1.210706) (C.210706)
APPVER:K2001QJYT $212202.20210728.104719
PlatformVer:K200-2021/07/20 12:58:48)-v0.01_R
MCUVER:V6.0-FF01-20210720-A02-CAN0017-17-00-00000000000-00
BTVER Bluetooth_V4.2_5876/2020:11:09:15:22:35 -
10I started this thread specifically for the K2001Q T3 models.
The T3/T3L has quite a few different firmwares and I am not sure if they can be exchanged and will work properly so I suggest to only load this only models that show K2001Q. The Q stands for Android 10. If you have any other K2001 models, this update will try but not work as changing Android versions can only be done using the .img file and I am not aware of any Android 10 .img file being available as yet.
If you radio shows K2001N but says Android 10, it is showing Fake Android 10 as N is Android 7. You can try this update but it will fail.
To confirm which model you have, go to Apps, Car settings, System settings, System Info. It must say K2001Q. MCUVersion doesn't matter.
I have attached a sample picture. It is also the latest firmware available for this model that I received from the manufacturer. I will post in this thread from now on as the previous thread has the T3 P1 model which this is but the K2001Q seems to be different firmware or has some different chips so might not be compatible with the other firmware. That model has the car settings in the Android settings menu which is completely different.
To update, download the zip file, rename it to update.zip, put it on the root of your flash.
Go to Apps, Car Settings, System settings, System Update. It should say there is an update available and you hit start. Unit will be reset back to factory once done. If the radio had DSP & Car Play, it will still be there when you update.
For changing the launcher (No aftermarket launcher is supported), do the following:
Apps -> Car Settings -> System Settings -> Factory Settings (Password is 16176699) -> Style Settings (Password is 111333). I prefer Style 3.
Car settings has a lot of new stuff. Like Desktop Settings. No idea what it is and I just received this firmware today to it will take time to figure it out. Factory settings -> Customized settings ... has a lot of options. Sleep, Voice control (never tested this), etc. If you need to change something, it will be there.
There are risks updating your radio so please do so at your risk. I did not write this firmware or own it or confirm it will work correctly for you. Try make sure you be as careful when updating as bricking your radio will
mean you will stuggle to fix it as no .img file is available to flash the radio directly.
Latest Stable Update (Given to me 09032023) with a software date of 15112022.
985.45 MB file on MEGA
mega.nz
Latest update now has ZLink5 for units with carplay which supports wireless android auto as well which is nice. And it runs well and fast. Still playing around with it.
Update (20211224):
811.96 MB file on MEGA
mega.nz
New update was given to me on 15/08/2022.
985.95 MB file on MEGA
mega.nz
I have just started testing the above and it will take a few weeks to see if there is any downsides to updating the radio. So far, Radio app is the different version with the circle but it now does save settings when closing and reopening the app.
**Do not update if your radio is not on 1024x800 resolution as the update will cause problems with the unit and it will not display correctly.33I recommend the update works quite well.
improvements I have noticed in my unit.
OBD2 connects at last.
GPS connects quickly.
and kavirz I have no problems with the radio app, it works perfectly for me and the station names are appreciated.
change ui theme without having to go through factory mode.
I like it a lot, thank you very much3Been working hard and got a new update...
811.96 MB file on MEGA
Interesting changes I have noticed:
New Radio app.
UI Theme can now be controlled by its own app.
New update based on 20211224.
