Glad it's not just me wanting to download the AAgateway app, hopefully we can get access soon! Keen to give this a try
[Android 4.1+]Proxy/GateWay for Android Auto
- Thread starter Emil Borconi
- Start date
-
- Tags
- android auto wifi
Does anyone know what the problem is with XDA-labs. I'm unable to use the app at all and the new forum is clunky.
Master is running Pie or above and slave is tethering:
Everything seems to work as intended except immediately after the car recognizes the slave as an android auto device it disconnects and tells me to unplug and reconnect the "phone". I'm not sure if the AA Gateway app is crashing or if it's just not compatable with my car (2021 Rav4). Some times I'll get a prompt on my phone to setup AA with the car but I can't press next on it, I think that's because it's already crashed on the car or slave device. I have it installed as a system app on a MK 809V_4K. I made sure it was set as a TV stick with no battery, and also connected a second power supply to the 12V only usb port so it would keep running even if the data USB port reset.
As a second question, if the slave is running a hotspot that you connect your phone to, how does your phone get internet access?
I also played around with turning off root mode, switching the hot spot to the master, using tasker instead of wireless gateway app on the master and every other combination I could think of for testing. The setup I listed gave the best almost success of any of them.
- Running in root mode: (Yes)
- If running in non-root mode, is the splashscreen visible on the car: (N/A)
- If running in non-root mode, did you set the masters BT inside AAGW app?: (Yes)
- Did the slave actually turned on the hotspot on the slave: (Yes)
- On the master did you select the slaves BT in the Wifi Launcher app?: (Yes)
- When the master connected to the car's BT did the Wifi launcher app started up?: (Yes)
- Did the master connected to the slaves hotspot?: (Yes)
- Did the AA icon appeared on the master at all (in the notification bar)?: (Yes)
Everything seems to work as intended except immediately after the car recognizes the slave as an android auto device it disconnects and tells me to unplug and reconnect the "phone". I'm not sure if the AA Gateway app is crashing or if it's just not compatable with my car (2021 Rav4). Some times I'll get a prompt on my phone to setup AA with the car but I can't press next on it, I think that's because it's already crashed on the car or slave device. I have it installed as a system app on a MK 809V_4K. I made sure it was set as a TV stick with no battery, and also connected a second power supply to the 12V only usb port so it would keep running even if the data USB port reset.
As a second question, if the slave is running a hotspot that you connect your phone to, how does your phone get internet access?
I also played around with turning off root mode, switching the hot spot to the master, using tasker instead of wireless gateway app on the master and every other combination I could think of for testing. The setup I listed gave the best almost success of any of them.
Last edited:
Does anyone have the aagateway apk? Can't seem to find it anywhere and lab is still not working for me.
AFAIK xda-labs is no more after the forum update. Not sure how the apps stored there will be made available again.
btw I'm also looking for this apk
Update: didn't know the app was paid. I would to pay if the dev wants to put it available somewhere. Will look at the Indigogo project
btw I'm also looking for this apk
Update: didn't know the app was paid. I would to pay if the dev wants to put it available somewhere. Will look at the Indigogo project
Last edited:
This son of a ***** deleted the apk and it's open source code and started an indigogo funding to start selling a previously-free and open app for moneyAFAIK xda-labs is no more after the forum update. Not sure how the apps stored there will be made available again.
btw I'm also looking for this apk
Completely inaccurate and untrue. The app was not free but was a paid app through XDA Labs. That's why no one is posting it in this thread is because is was neither free nor open source. The indiegogo project is different software running on a different platform that he developed with partners.
The devs have every right to be paid for their hard work on the dongle and Emil has every right to be paid for his hard work on the app.
And get your facts right. He didn't delete the ap, XDA did with it's forum update and the code is still available on github.
Any chance you have another repository or link you can share with the app? With the closure of XDA labs it is no longer available from the links in the post. Thanks for your work on this.
Disregard I just read the latest posts and will look at the idigogo and github avenues thanks
Hi guys.
As you probably know I'm pretty busy with a major project which means way less time for XDA. Sadly as we know XDA Labs went down for a while, and there are many of you who have purchased the app on XDA Labs and not able to access it any longer.
For all those, you can now used the following link: https://www.b3itlabs.com/download.php you will need to fill in the paypal email address you used to make the purchase, the page will then generate a one time unique link which will be emailed to you.
Link will allow you to download to pick and download the APK.
As I've said all links are one time use only, so you won't be able to share those links, if you need to re-download the app, you will need to request a new link.
I will be adding checkout option to the website as well hopefully in the near future so new users can get a copy of the apps if needed.
If you need any support, please contact me directly by email.
As you probably know I'm pretty busy with a major project which means way less time for XDA. Sadly as we know XDA Labs went down for a while, and there are many of you who have purchased the app on XDA Labs and not able to access it any longer.
For all those, you can now used the following link: https://www.b3itlabs.com/download.php you will need to fill in the paypal email address you used to make the purchase, the page will then generate a one time unique link which will be emailed to you.
Link will allow you to download to pick and download the APK.
As I've said all links are one time use only, so you won't be able to share those links, if you need to re-download the app, you will need to request a new link.
I will be adding checkout option to the website as well hopefully in the near future so new users can get a copy of the apps if needed.
If you need any support, please contact me directly by email.
Hello
I need help :
Samsung Note 10+ android 11 root=no master
Samsung Note 4 android 6.01 root=yes as slave
Could you give me a little detailed AAGateway procedure for these 2 devices?
I can't do it.
Thank you in advance.
PS: it is while waiting for the AAWireless / Indiegogo box that I paid for March
I need help :
Samsung Note 10+ android 11 root=no master
Samsung Note 4 android 6.01 root=yes as slave
Could you give me a little detailed AAGateway procedure for these 2 devices?
I can't do it.
Thank you in advance.
PS: it is while waiting for the AAWireless / Indiegogo box that I paid for March
First of I will kindly suggest to watch your language, if you are unhappy with something there are many ways to put that into words, some in constructive some in demolishing.
Secondly, I've only ever open sourced the basic idea that was and still is on github for anyone who wants to play around with it, all other versions of the app where not open sourced.
The indiegogo project started because it was nearly impossible to make a universal app which works with all devices, and it's impossible to implement the official Wireless protocol without having low level access to BT stack, which means your own hardware.
And as a last point XDA Labs and the apps hosted there are not my project, I woke up one day that it's offline and apparently the dev is not feeling well so not sure when / if XDA Labs apps section will be put back online, so to don't leave all the users who paid for something without that thing I had to come up with a way to host that app, without actually making it free for the whole world, which meant extra / unplanned work.
hey emil,
i do get the link in my mailbox, but as soon as i open the link it shows expried " Invalid, expired or used link "
can you help with this?
Try to copy&paste the link instead of clicking on it, maybe try a different browser.
Hi Emil,
How can I make a purchase and a payment for your AAGateway application?
How can I make a purchase and a payment for your AAGateway application?
Ok. Emil,
I made a payment and received a link, than I chose to download version 2.3.
Now I have a folder 2.3 (on my linux machine) but can not see apk file. What should I do next.
I intend to put the app on my old Samsung J3 2016 smartphone.
Sorry that was a broken APK, removed it now, re-download the app please (version 2.2) that will be an APK and you can install it using adb or copy it over to the slave device.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
111Background
- Couple of years ago Google have launched Android Auto, but up till recently the only way to connect your device to the car/head unit was to plug in a USB cable. As of 2018 this starts to change, BUT it looks like you will need to get new hardware for this and older cars/head units won't be upgraded to support this, neither phones with older OS.
Concept
- Since many of us will like to have this wire free but not ready / willing or have the possibility to upgrade the units/cars/phones I have thought of a way to achieve this, by using a small auxiliary device, like for example a very cheap and basic Android TV stick, which can be plugged in/mounted in the car and which can fulfil the roll of a Wifi antenna for your car.
This app should allow you to transform any android powered device into a Wifi receiver for your Android Auto compatible Car/Headunit. Please do not confuse Android Auto, with Android powered headunit (usually Chinese, like MTCB, MTCD, Joying, etc).
AAGateWay Documentation.
Beta released (04.01.2020)
What is it?
AAGateWay is a an app which should allow you to use an auxiliary (slave) device to connect your existing Android Auto compatible car to your phone (master) using a hotspot created on your phone.
How to use it?
SLAVE SETUP
1) Install the app using XDA Labs (Only on SLAVE) : https://www.b3itlabs.com/prod.php?id=3
2) Configure
- FOR BOTH ROOTED AND NOT-ROOTED SLAVES
- CASE 1: Master is running Pie or higher
- Pair Master and Slave over BT (do this from the normal BT settings)
- Open app
- If slave is ROOTED and ONLY if you are using a TV STICK convert the app to system app. (if app not visible after conversion, reboot device)
- Enable the start tethering option (If asked make sure you manually configure the hotspot, to have the name HUR and the password AndroidAutoConnect)
- Select the masters phone BT MAC
- Exit
- Pair Master and Slave over BT (do this from the normal BT settings)
- CASE 2: Master is running Android 8 or lower
- Create a Wifi hotspot from the master
- Connect slave to it
- Reopen AAGateWay and select the masters hotspot from the "Phone Wifi SSID" list
- Create a Wifi hotspot from the master
- CASE 1: Master is running Pie or higher
- Slave is ROOTED - This will give a much bigger compatibility with cars, it should work with any car/unit (but depends a lot on the slave used, read below)
- Slave is NOT ROOTED - This mode won't work on all cars and it has caveats.
MASTER SETUP
- CASE 1: Master is running Pie or higher
- Install WiFi Launcher for HUR (https://play.google.com/store/apps/details?id=com.borconi.emil.wifilauncherforhur)
- Make sure WiFi Launcher is version 2.1 or higher!!!
- Open WiFi Launcher
- FOR Android 10, set permission location to ALWAYS!!!!!!
- Select slaves BT from the BT list and exit
- DO NOT ENABLE ANY OF THE OTHER OPTIONS!!!!
- Install WiFi Launcher for HUR (https://play.google.com/store/apps/details?id=com.borconi.emil.wifilauncherforhur)
- If you do not want to use WiFi Launcher you can use the following Tasker task to launch AA on any condition you want: https://drive.google.com/file/d/1UO-Z5P0oQpHEdrQjYqvSM48L1TI-K5g8/view?usp=sharing
- CASE 2: Master is running Android 8 or lower
- Open Android Auto, go to Settings, scroll down tap the version 10 times, then from the 3 dotted top right corner select start headunti server.
- Exit Android Auto
- Leave the Headunit Server running
- When you get into the car turn on the hotspot on the master (or use Tasker, automate or anything else do that for you)
- Open Android Auto, go to Settings, scroll down tap the version 10 times, then from the 3 dotted top right corner select start headunti server.
CONNECTING
- Go to the car, plug in the slave to the car's USB and start the car
- Slave is ROOTED
- Nothing should happen, car should NOT detect the phone (SLAVE) at this stage. If the car does detect the slave being connected, it means your slave doesn't allow a proper USB toggle, in which case you should try enabling non-root mode.
- Master is Pie and above
- If you selected to tether from the slave, at this point you should see the slave turning on the hotspot, otherwise you might see the slave trying to connect to a Wifi network.
- Slave will notify master
- Master will automatically start WiFi Launcher
- Master will connect to slaves hotspot
- Master will start AA on the phone and notifies slave
- If you selected to tether from the slave, at this point you should see the slave turning on the hotspot, otherwise you might see the slave trying to connect to a Wifi network.
- Slave will enable USB
- If you are using a phone as slave you will get a prompt if you want to use AAGW as the default app for this action, make sure you select ALWAYS ans yes. (TV stick should work automatically)
- Projection should start
- Nothing should happen, car should NOT detect the phone (SLAVE) at this stage. If the car does detect the slave being connected, it means your slave doesn't allow a proper USB toggle, in which case you should try enabling non-root mode.
- Slave is NOT-ROOTED (or running in non-root mode)
- You will get a prompt to use AAGateWay for this action, make sure you select always.
- Car should display a splah-screen saying waiting for master. (on some car's screen you might see a scrambled image)
- After splash-screen is displayed, the slave will start tethering, or will try to connect to the masters hotspot depending on the setting.
- Once a network connection is established between the 2 devices, you will see the AA icon turning on on the master and Android Auto should be displayed on the car's screen. It is possible that the screen will stay /turn black, if that happens, you can try to press the home button on the infotainment system, then re-open Android Auto on it.
- You will get a prompt to use AAGateWay for this action, make sure you select always.
Troubleshoot and getting help
As the thread has so much information it will be really nice if we can try to stick to one format of troubleshooting, by using one of this 2 templates:
- Master is running Pie or above and slave is tethering:
- Running in root mode: (Yes/No)
- If running in non-root mode, is the splashscreen visible on the car: (Yes/No)
- If running in non-root mode, did you set the masters BT inside AAGW app?: (Yes/No)
- Did the slave actually turned on the hotspot on the slave: (Yes/No)
- On the master did you select the slaves BT in the Wifi Launcher app?: (Yes/No)
- When the master connected to the car's BT did the Wifi launcher app started up?: (Yes/No)
- Did the master connected to the slaves hotspot?: (Yes/No)
- Did the AA icon appeared on the master at all (in the notification bar)?: (Yes/No)
- Master is running Oreo or below and master is tethering:
- Running in root mode: (Yes/No)
- If running in non-root mode, is the splashscreen visible on the car: (Yes/No)
- If running in non-root mode, did you set the masters BT inside AAGW app?: (Yes/No)
- Did you select the masters hotspot name in AAGW?: (Yes/No)
- Have you started the Headunit server on the master?: (Yes/No)
- On the master did you select the cars BT in the Wifi Launcher app?: (Yes/No)
- When the master connected to the car's BT did the Wifi launcher app started up (notification bar)?: (Yes/No)
- Did the master turned on the hotspot?: (Yes/No)
- Did the slave connected to the masters hotspot?: (Yes/No)
- Getting rid of all automation and manually starting it all (regardless of Android version on master and slave):
- Uninstall AAGW on the master
- Start the headunit server from within Android Auto on the master
- Create a hotspot on the master
- Open AAGW on the slave and make sure it's not set to tether
- in AAGW make sure you select the masters hotspot
- If AAGW is set to non-root mode make sure you select the masters BT (just press the button AAGW will do a BT scan of nearby devices and you can pick it from the list)
- Go to the car and plug the slave in
- Start the car
- If slave is running in ROOT mode, slave will first try to connect to the masters Wifi and you will see a notification on the master that AA is running, only then the car should recognise a plugged in device.
- If the slave is running in non-root mode, first you will see a splash screen on the car, then you will see slave connects to masters Wifi (if not already connected), then you will see AA starting on the master.
- How do I collect a bug report / logcat
- Open Settings > About phone.
- Scroll down to the Build number.
- Tap the Build number 7 times in quick succession until "You're now a developer" appears.
- Return to the Settings menu and select Developer options.
- At the top of the screen, make sure 'Developer options' is set to On (green).
- Scroll down to Debugging and enable both USB debugging and Bug Report Shortcut on (green).
- Tab on Logger buffer sizes: Default setting is 256K. Select 16M to help capture more information for debugging. Of note, it can affect the apps performance especially with lower spec phone, so change it back after you have finished submitting bug reports.
- On slave make sure you enable debugging inside AAGW, on master open Android Auto go to developer settings and make sure force logging is enabled.
- Reproduce the problem
- Hold the Power button down until the menu appears.
- Select Take bug report. and wait for the device to capture the bug report.
- Tap the 'Bug report captured' notification when it appears.
- Send the bug report by email to [email protected]
Know problems, workaround:
- - Latency & lag. This will be really down to the devices you are using. I have tested it with a MK808B Plus, it work’s ok most of the time but occasionally you will get the odd lag. I’ve also tested it with a Nexus 7 tablet, and there was no lag at all, so device does matter, as well as probably ROM.
- - I get random disconnection. There can be 2 causes for this, one the USB connection fails between the car and the auxiliary device, or the Wifi fails between the phone and the auxiliary device. In my tests I saw a few Wifi disconnections without any reason on the MK808, but non on the Nexus. Changing the tethering option from WPA2 to Open did help with this.
- - App is closed without error or reason. The app runs in a background process, with a minimal interaction with the foreground, some devices/OS will kill background apps. I saw this happening on Nokia and I saw this happening on OnePlus as well. Try disabling battery optimisation for AAGateWay, that might help.
- - I just cannot get it to work… Try using a phone, that will at least give you some visual guidance. Make sure that your device connects to the phone Wifi hotspot, make sure that AA Headunit server is running on the phone (try to force stop Goolge Play Services, stop and restart the headunit server)… All fails contact me
- - Nothing happens on the master, using Wifi Launcher for HUR app. In this case, try to manually start the headunit server on the master, and manually turn on a hotspot, then reconfigure you're slave to connect to the masters hotspot (even if the master is running Pie or higher).
Device compatibility:
Master:
Any phone which normally works with Android Auto
Slave with ROOT:
- - Tested and know to work: - MK809V, Nexus 7 (depending on rom), Sony X Compact (depending on rom)
- -Tested and not working as expected: Pixel 2, MK808B
- - While root is necessary, not all phones can toggle USB port on and off by software. And there can be other problems, for example on some devices when you turn off the USB the phone loses the ability to detect the power connection as well, which is use as trigger to start the whole process. It is almost impossible to predict if a phone will be a good slave candidate or not.
Other things
- Xiaomi phones (MIUI makes a mess), try not to use it for Slave
- Generally older phones (pre oreo) are more likely to work fine as a slave device.
Any suggested slave?
- Yes, use an MK809V TV stick, as the experience with it, is pretty slick and it should work out of the box. If you get a MK809IV try to get the one with Android 5.1.1 as the one with Android 7.1 has problems with the tethering.
FAQ.
Guarantee or Warranty
- Due to the fact that there are so many possibilities and combinations of cars, head units, slave and master devices, there is no way for me to test all of them, however if you did purchase the software and you are not able to get it to work for any reason, please email me on [email protected] and I'm more then happy to refund the purchase.
Teaser:
24Good news, I've made the breakthrough I needed on the slave side, waiting for more confirmations but looks very promising.
If all goes well I should be able to update the app on the next week or so, possibly to RC or stable state.22Updates from the Netherlands, CP & EB IT is officially opened next week I will start the work on the promo video then Kickstarter campaign is on....21Just got off the phone with the guys who are going to shoot the promo video, we should have that by no later then 23rd of August done, so I really hope that by that day the kick-starter will be live.21Hi guys.
Sorry to be radio silent, indeed I was relatively busy with HUR and OBD2AA as well as other non Android Auto related work. Today I have finally managed to push out a stable release for HUR, and obd2aa is also doing pretty well, so in the next period I will continue to develop the AAGateWay, that being said my schedule looks like this:
- This weekend, working all weekend, preparing photos from 5 different events across the UK so that will tied me up till Tuesday
- Wednesday morning hitting the road (travelling to Romania - 3 days road trip)
- I'm not sure how much I will be in Romania
- October 20 I'm flying to the States for 2 weeks.
So as you can see I will be quite a lot on the road, but I will take my Sony headunit and some dev tools with me to Romania and will carry on working, my target is to have a stable version of this app before I fly to the states.
I will try to put together a list of most common problems I saw here and wishes tomorrow so you can all see and know what's happening as well as input new ideas if you have any. - FOR BOTH ROOTED AND NOT-ROOTED SLAVES
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone