Android Samsung Secret Code

Search This thread

royskeyz

Senior Member
Apr 10, 2011
681
291
Bacolod
Hello everyone,

I dont see this in SGA FORUM so decided to share this here.

Warning! Some codes if type correctly wont ask you for confirmation, ex. Hardreset.

If you have something to add, please share.

Here it is.

*#*#4636#*#* - Phone Information
*2767*3855# - Hard Reset
*#*#7780#*#* - Factory Reset
*#*#7594#*#* - Change End Call/Power Option
*#*#197328640#*#* - Service Mode 1
*#2263# - Service mode 2
*#*#273283*255*663282*#*#* - File Copy Screen (Backup Media Files)
*#*#526#*#* - WLAN Test
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS Test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#* - GTalk Service Monitor

Codes to launch various Factory Tests:

*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version

Codes to get Firmware version information:

*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
*#272*IMEI# - To change the salescodes and reset the user data (by blade2011)
*#*0*# - general test (by lovetz)
 
Last edited:

Akhilendra Gadde

Senior Member
Oct 24, 2012
849
1,779
Mumbai
Hello everyone,

I dont see this in SGA FORUM so decided to share this here.

Warning! Some codes if type correctly wont ask you for confirmation, ex. Hardreset.

If you have something to add, please share.

Here it is.

*#*#4636#*#* - Phone Information
*2767*3855# - Hard Reset
*#*#7780#*#* - Factory Reset
*#*#7594#*#* - Change End Call/Power Option
*#*#197328640#*#* - Service Mode 1
*#2263# - Service mode 2
*#*#273283*255*663282*#*#* - File Copy Screen (Backup Media Files)
*#*#526#*#* - WLAN Test
*#*#232338#*#* - Shows WiFi MAC address
*#*#1472365#*#* - GPS Test
*#*#1575#*#* - Another GPS test
*#*#232331#*#* - Bluetooth test
*#*#232337#*# - Shows Bluetooth device address
*#*#8255#*#* - GTalk Service Monitor

Codes to launch various Factory Tests:

*#*#0283#*#* - Packet Loopback
*#*#0*#*#* - LCD test
*#*#0673#*#* - Melody test
*#*#0842#*#* - Device test (Vibration test and BackLight test)
*#*#2663#*#* - Touch screen version
*#*#2664#*#* - Touch screen test
*#*#0588#*#* - Proximity sensor test
*#*#3264#*#* - RAM version

Codes to get Firmware version information:

*#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
*#*#1234#*#* - PDA and Phone
*#*#1111#*#* - FTA SW Version
*#*#2222#*#* - FTA HW Version
*#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
*#272*IMEI# - To change the salescodes and reset the user data (by blade2011)
*#*0*# - general test (by lovetz)
THANK U V.v.MUCH :)
 
  • Like
Reactions: Mike02x

tomsons26

Senior Member
Sep 20, 2011
183
114
The one of the apks(don't remember which probably the phone.apk) contains a list of all these commands, the list posted here is not the full one there are a lot more, there pretty much in plain text, get Notepad++ and search -> find in files in the app folder and search one of the WORKING common codes like *#*#4636#*#*,

but be warned there is a code that reboots the phone, reboots to download mode, and one that factory resets without confirmation, there also is a code that allows retyping the imei but it only works on some roms(probably the the beta version KPH)
 
Last edited:
  • Like
Reactions: Mike02x

D_roid_noobie

Member
May 24, 2013
33
9
Buffalo NY USA
Update to Samsung Mobile Codes

Update to Samsung Mobile Codes

Remember: YOU'RE USING THESE CODES AT YOUR OWN RISK.

*#1234# = Firmware Version.
*#2222# = H/W Version.
*#8999*8376263# = All Versions Together.
*#8999*8378# = Test Menu.
*#4777*8665# = GPSR Tool.
*#8999*523# = LCD Brightness.
*#8999*377# = Error Menu.
*#8999*327# = EEP Menu.
*#8999*667# = Debug Mode.
*#92782# = PhoneModel. (Wap)
#*5737425# = JAVA Mode.
*#2255# = Call List.
*#232337# = Bluetooth MAC Adress.
*#5282837# = Java Version.
#*4773# = Incremental Redundancy.
#*7752# = 8 PSK uplink capability bit.
#*7785# = Reset wakeup & RTK timer cariables/variables.
#*7200# = Tone Generator Mute.
#*3888# = BLUETOOTH Test mode.
#*7828# = Task screen.
#*#8377466# = S/W Version & H/W Version.
#*2562# = Restarts Phone.
#*2565# = No Blocking? General Defense.
#*3353# = General Defense, Code Erased.
#*3837# = Phone Hangs on White screen.
#*3849# = Restarts Phone.
#*3851# = Restarts Phone.
#*3876# = Restarts Phone.
#*7222# = Operation Typ: (Class C GSM)
#*7224# = !!! ERROR !!!
#*7252# = Operation Typ: (Class B GPRS)
#*7271# = CMD: (Not Available)
#*7274# = CMD: (Not Available)
#*7337# = Restarts Phone. (Resets Wap Settings)
#*2787# = CRTP ON/OFF.
#*2886# = AutoAnswer ON/OFF.
#*3737# = L1 AFC.
#*5133# = L1 HO Data.
#*7288# = GPRS Detached/Attached.
#*7287# = GPRS Attached.
#*7666# = White Screen.
#*7693# = Sleep Deactivate/Activate.
#*7284# = L1 HO Data.
#*2256# = Calibration info? (For CMD set DEBUGAUTONOMY in cihard.opt)
#*2286# = Databattery.
#*2527# = GPRS switching set to (Class 4, 8, 9, 10)
#*2679# = Copycat feature Activa/Deactivate.
#*3940# = External looptest 9600 bps.
#*4263# = Handsfree mode Activate/Deactivate.
#*4700# = Please use function 2637.
#*7352# = BVMC Reg value (LOW_SWTOFF, NOMINAL_SWTOFF)
#*2558# = Time ON.
#*3370# = Same as 4700.
#*3941# = External looptest 115200 bps
#*5176# = L1 Sleep.
#*7462# = SIM Phase.
#*7983# = Voltage/Freq.
#*7986# = Voltage.
#*8466# = Old Time.
#*2255# = Call Failed.
#*5187# = L1C2G trace Activate/Deactivate.
#*5376# = DELETE ALL SMS!!!!.
#*6837# = Official Software Version: (0003000016000702)
#*7524# = KCGPRS: (FF FF FF FF FF FF FF FF 07)
#*7562# = LOCI GPRS: (FF FF FF FF FF FF FF FF FF FF FF FE FF 01)
#*2337# = Permanent Registration Beep.
#*2474# = Charging Duration.
#*2834# = Audio Path. (Handsfree)
#*3270# = DCS Support Activate/Deactivate.
#*3282# = Data Activate/Deactivate.
#*3476# = EGSM Activate/Deactivate.
#*3676# = FORMAT FLASH VOLUME!!!
#*4760# = GSM Activate/Deactivate.
#*4864# = White Screen.
#*5171# = L1P1.
#*5172# = L1P2.
#*5173# = L1P3.
#*7326# = Accessory.
#*7683# = Sleep variable.
#*8465# = Time in L1.
#*2252# = Current CAL.
#*2836# = AVDDSS Management Activate/Deactivate.
#*3877# = Dump of SPY trace.
#*7728# = RSAV.
#*2677# = Same as 4700.
#*3728# = Time 2 Decod.
#*3725# = B4 last off.
#*7372# = Resetting the time to DPB variables.
#*7732# = Packet flow context bit Activate/Deactivate.
#*6833# = New uplink establishment Activate/Deactivate.
#*3273# = EGPRS multislot. (Class 4, 8, 9, 10)
#*7722# = RLC bitmap compression Activate/Deactivate.
#*2351# = Blinks 1347E201 in RED.
#*4472# = Hysteresis of serving cell: 3 dB
#*2775# = Switch to 2 inner speaker.
#*9270# = Force WBS.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3757# = DSL UART speed set to. (LOW, HIGH)
#*8726# = Switches USBACM to Normal.
#*8724# = Switches USBACM to Generator mode.
#*8727# = Switches USBACM to Slink mode.
#*8725# = Switches USBACM to Loop-back mode.
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*8370# = Tfs4.0 Test 0.
#*8371# = Tfs4.0 Test 1.
#*8372# = Tfs4.0 Test 2.
#*8373# = Tfs4.0 Test 3.
#*8374# = Tfs4.0 Test 4.
#*8375# = Tfs4.0 Test 5.
#*8376# = Tfs4.0 Test 6.
#*8377# = Tfs4.0 Test 7.
#*8378# = Tfs4.0 Test 8.
#*8379# = Tfs4.0 Test 9.
#*7878# = FirstStartup. (0=NO, 1=YES)
#*3838# = Blinks 3D030300 in RED.
#*2077# = GPRS Switch.
#*2027# = GPRS Switch.
#*0227# = GPRS Switch.
#*0277# = GPRS Switch.
#*22671# = AMR REC START.
#*22672# = Stop AMR REC. (File name: /a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# = Pause REC.
#*22674# = Resume REC.
#*22675# = AMR Playback.
#*22676# = AMR Stop Play.
#*22677# = Pause Play.
#*22678# = Resume Play.
#*77261# = PCM Rec Req.
#*77262# = Stop PCM Rec.
#*77263# = PCM Playback.
#*77264# = PCM Stop Play.
#*22679# = AMR Get Time.
*#8999*364# = Watchdog ON/OFF.
*#8999*427# = WATCHDOG signal route setup.
*2767*226372# = Camera Reset. (deletes photos)
*2767*3855# = E2P Full Reset.
*2767*2878# = E2P Custom Reset.
*2767*927# = E2P Wap Reset.
*2767*226372# = E2P Camera Reset.
*2767*688# = Reset Mobile TV.
#7263867# = RAM Dump. (On or Off)
 
  • Like
Reactions: Persian Ace

D_roid_noobie

Member
May 24, 2013
33
9
Buffalo NY USA
sir is there any code which can clear only cache and dalvik cache


There is none that I know of.
You have to be rooted to wipe dalvik. If rooted its in the advanced menu of cwm recovery.
The only way to clear dalvik without root would be to factory reset your phone as cache and dalvik get cleared during this process.
For best results it would be wise to perform both Wipe Data and Wipe Cache to ensure integrity and no program errors within the app itself.
Of course, you will have to go through the complete set up/sign in/etc. when you reboot.
 

Lewis0214

Senior Member
Jan 30, 2013
137
12
How can I use these commands?
I typed into dial and nothing happened. If I press call button, it start to call it and nothing happened.
So how can I use them?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 43
    Hello everyone,

    I dont see this in SGA FORUM so decided to share this here.

    Warning! Some codes if type correctly wont ask you for confirmation, ex. Hardreset.

    If you have something to add, please share.

    Here it is.

    *#*#4636#*#* - Phone Information
    *2767*3855# - Hard Reset
    *#*#7780#*#* - Factory Reset
    *#*#7594#*#* - Change End Call/Power Option
    *#*#197328640#*#* - Service Mode 1
    *#2263# - Service mode 2
    *#*#273283*255*663282*#*#* - File Copy Screen (Backup Media Files)
    *#*#526#*#* - WLAN Test
    *#*#232338#*#* - Shows WiFi MAC address
    *#*#1472365#*#* - GPS Test
    *#*#1575#*#* - Another GPS test
    *#*#232331#*#* - Bluetooth test
    *#*#232337#*# - Shows Bluetooth device address
    *#*#8255#*#* - GTalk Service Monitor

    Codes to launch various Factory Tests:

    *#*#0283#*#* - Packet Loopback
    *#*#0*#*#* - LCD test
    *#*#0673#*#* - Melody test
    *#*#0842#*#* - Device test (Vibration test and BackLight test)
    *#*#2663#*#* - Touch screen version
    *#*#2664#*#* - Touch screen test
    *#*#0588#*#* - Proximity sensor test
    *#*#3264#*#* - RAM version

    Codes to get Firmware version information:

    *#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
    *#*#1234#*#* - PDA and Phone
    *#*#1111#*#* - FTA SW Version
    *#*#2222#*#* - FTA HW Version
    *#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
    *#272*IMEI# - To change the salescodes and reset the user data (by blade2011)
    *#*0*# - general test (by lovetz)
    4
    *#0*# - general test
    2
    Dont forget:
    *#272*IMEI# To change the salescodes and reset the user data
    1
    Hello everyone,

    I dont see this in SGA FORUM so decided to share this here.

    Warning! Some codes if type correctly wont ask you for confirmation, ex. Hardreset.

    If you have something to add, please share.

    Here it is.

    *#*#4636#*#* - Phone Information
    *2767*3855# - Hard Reset
    *#*#7780#*#* - Factory Reset
    *#*#7594#*#* - Change End Call/Power Option
    *#*#197328640#*#* - Service Mode 1
    *#2263# - Service mode 2
    *#*#273283*255*663282*#*#* - File Copy Screen (Backup Media Files)
    *#*#526#*#* - WLAN Test
    *#*#232338#*#* - Shows WiFi MAC address
    *#*#1472365#*#* - GPS Test
    *#*#1575#*#* - Another GPS test
    *#*#232331#*#* - Bluetooth test
    *#*#232337#*# - Shows Bluetooth device address
    *#*#8255#*#* - GTalk Service Monitor

    Codes to launch various Factory Tests:

    *#*#0283#*#* - Packet Loopback
    *#*#0*#*#* - LCD test
    *#*#0673#*#* - Melody test
    *#*#0842#*#* - Device test (Vibration test and BackLight test)
    *#*#2663#*#* - Touch screen version
    *#*#2664#*#* - Touch screen test
    *#*#0588#*#* - Proximity sensor test
    *#*#3264#*#* - RAM version

    Codes to get Firmware version information:

    *#*#4986*2650468#*#* - PDA, Phone, H/W, RFCallDate
    *#*#1234#*#* - PDA and Phone
    *#*#1111#*#* - FTA SW Version
    *#*#2222#*#* - FTA HW Version
    *#*#44336#*#* - PDA, Phone, CSC, Build Time, Changelist number
    *#272*IMEI# - To change the salescodes and reset the user data (by blade2011)
    *#*0*# - general test (by lovetz)
    THANK U V.v.MUCH :)
    1
    The one of the apks(don't remember which probably the phone.apk) contains a list of all these commands, the list posted here is not the full one there are a lot more, there pretty much in plain text, get Notepad++ and search -> find in files in the app folder and search one of the WORKING common codes like *#*#4636#*#*,

    but be warned there is a code that reboots the phone, reboots to download mode, and one that factory resets without confirmation, there also is a code that allows retyping the imei but it only works on some roms(probably the the beta version KPH)
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone