Android TV Box doesn't contain reset Button

[Ayoub.2li]

I tried to upgrade the firmware through the tools APP, but this stage requires me to put the device in the recovery mode, which requires using the reset button. please advise

TV Box Manufacture: Shenzhen sky worth digital Technology
Model: NGB22-OSN

refer to Picture

 

[Ayoub.2li]

hello

I'm looking for the short point on the motherboard

 

[ath156]

Download "Terminal Emulator" from Playstore.
In it type "reboot update". This is usefull if you want to boot from the micro sd card or USB port.

You can also type there "reboot recovery", which will actually reboot in Recovery.
Choose whatever you need,

 

[Ayoub.2li]

Download "Terminal Emulator" from Playstore.
In it type "reboot update". This is usefull if you want to boot from the micro sd card or USB port.

You can also type there "reboot recovery", which will actually reboot in Recovery.
Choose whatever you need,

Unfortunately, I cannot install most of the application, including development APP, on the device, as the device is registered to a OSN company

in addition i can't give permit for the donloaded APP as shown is locked

 

[guilhermefr]

Download "Terminal Emulator" from Playstore.
In it type "reboot update". This is usefull if you want to boot from the micro sd card or USB port.

You can also type there "reboot recovery", which will actually reboot in Recovery.
Choose whatever you need,

I want to upgrade ROM using USB Burning Tools. My TV Box currently has TWRP recovery installed. So when I type "reboot recovery" in terminal, it boots to TWRP.

Do you know how I could boot into "ROM upload mode" wihtout booting to TWRP? Or how I could from TWRP start the "ROM upload mode"?

 

[mAtvXk]

You have the answer in front your eyes...

Download "Terminal Emulator" from Playstore.
In it type "reboot update". This is usefull if you want to boot from the micro sd card or USB port.

do above, while burning tool is running.