No edge to edge coverage. Edge of the glass is not curve.I am using this tempered glass bought from HK. I would said it is the best.. cause there are camera cut out instead of clear glass which will affect pic quality.
Any info about good tempered glass for POCO F1 online??
- Thread starter atrirocks
- Start date
Got this one...but camera cutout is not there...but there is gap which can get clotted with dust...installed 2 days ago and already got dusted camera
I think the best place to buy from would be AliExpress. I'll browse there to see if something fits my needs.
I don't want a heavy case. I want a skin. Can anyone point me towards some that are available in India
I don't want a heavy case. I want a skin. Can anyone point me towards some that are available in India
S Design Premium 6D 9H Full Glue Glass for Xiaomi Poco F1 https://www.amazon.in/dp/B07H4183ZJ/ref=cm_sw_r_cp_apa_i_fIjPBbYCM06QK
Here's my detailed review.
Pros:
Just recieved this. Its very good. Only a cloth is provided as installation tool, so it must be applied cautiously.
Led notification is not covered and seperate holes are given for all the components of notch.
And the side swipe is not interfered.
Cons:
Only con is that it cannot cover the sides fully. but this is actually good because it will support usage of various back cases without being lifted up.
And im pretty sure no one uses their phone without a case for now.
Air bubble at border of notch is kinda inevitable
Approx 1mm of screen on left and right is cut off by black border.
Note: highly recommended that you get it applied by some professional who has regular experience with this.
Gotta be the best purchase with 250₹
Here's my detailed review.
Pros:
Just recieved this. Its very good. Only a cloth is provided as installation tool, so it must be applied cautiously.
Led notification is not covered and seperate holes are given for all the components of notch.
And the side swipe is not interfered.
Cons:
Only con is that it cannot cover the sides fully. but this is actually good because it will support usage of various back cases without being lifted up.
And im pretty sure no one uses their phone without a case for now.
Air bubble at border of notch is kinda inevitable
Approx 1mm of screen on left and right is cut off by black border.
Note: highly recommended that you get it applied by some professional who has regular experience with this.
Gotta be the best purchase with 250₹
Last edited:
Can you post some pictures after applying?
---------- Post added at 08:08 AM ---------- Previous post was at 08:08 AM ----------
But you gotta wait for a lot of days, right?
i ordered these 1 week ago, i will post when i have them but it will take another week or longer.
https://www.fasttech.com/p/9670003
https://www.fasttech.com/p/9670003
Bought this a few days back and it got delivered today ..
https://www.amazon.in/gp/product/B07H2H5PBZ/
Don't buy this ... it's like 1mm small from all sides... the packaging says 6D but it's got REALLY rough edges and seems like a normal tempered glass..
https://www.amazon.in/gp/product/B07H2H5PBZ/
Don't buy this ... it's like 1mm small from all sides... the packaging says 6D but it's got REALLY rough edges and seems like a normal tempered glass..
For skinks you choice which i know and vouch since i have used both
1. from Gadgetshieldz
https://www.gadgetshieldz.com/xiaomi-poco-f1-skins-decals-wraps.html
3. From MI themselves
https://store.mi.com/in/accessories/166-50024
Thanks man, I almost bought it looking at 5 stars. Just can't trust anything now.
Yeah ... no worries... I wanted to leave a review on Amazon but it's on pre-order so cannot leave review there ... seems that it the reason they have put it as pre-order so unsatisfied customers cannot leave negative review
If you are still looking for Edge to Edge Tempered glass for Poco F1, then wait no more!
The first perfect cutting tempered glass is out now!
Buy Now: https://glazedinc.com/collections/products/products/poco-f1-full-glue-edge-to-edge-glass?aff=12
Wait! We have a suprise for you
Use " POCOF1OFFICIAL " Promo-Code during checkout to get extra 10% Off!
Exclusive for this group members!
You can use any case with this, there won't be any issue
The first perfect cutting tempered glass is out now!
Buy Now: https://glazedinc.com/collections/products/products/poco-f1-full-glue-edge-to-edge-glass?aff=12
Wait! We have a suprise for you
Use " POCOF1OFFICIAL " Promo-Code during checkout to get extra 10% Off!
Exclusive for this group members!
You can use any case with this, there won't be any issue
So I've bought a case and Tempered glass combo and they fit well and give me the ultimate protected feeling.
1.Tempered glass:
S Design Premium 6D 9H Full Glue Glass for Xiaomi Poco F1 https://www.amazon.in/dp/B07H4183ZJ/ref=cm_sw_r_cp_apap_PyRdAxzTPlawt
Pros:
Perfect notch cutouts for all components.
Led notification cutout
Its fingerprint smudge proof and scratch resistant to certain degree
doesnt extend fully to the sides(like 1mm less to the screen in both sides) , hence it is compatible with all cases, without being lifted up.
It's actually affordable glass and not some cheap plastic
Cons:
Proper installation kit not given
The black lining covers up approx <1mm of screen on sides.(but not quite noticeable)
Is off by 0.5mm on top and bottom
2. Case:
Wellpoint Back Cover for POCO F1
http://dl.flipkart.com/dl/wellpoint...x?pid=ACCF866DSRQ9YUGM&cmpid=product.share.pp
Pros:
Very cheap
Perfect cut outs for jack, speakers, charging port
Volume buttons and power buttons give nice haptic feel
Due to its thickness, gives a considerable groove for cam protection
Nice matte finish(kindof)
Soft lining inside
Doesnt scratch.
Cons:
It doesn't fit as tight as it did in corners
(But this con actually helps in not lifting up tempered glass)
No premium feel
I suggest you go for kapaver. I only bought this cause kapaver was out of stock at that moment.
Heres is the link for pics. You decide finally.
https://drive.google.com/folderview?id=195m75C33pp7VCJfZHn9Eb6gWjqh4imyn
1.Tempered glass:
S Design Premium 6D 9H Full Glue Glass for Xiaomi Poco F1 https://www.amazon.in/dp/B07H4183ZJ/ref=cm_sw_r_cp_apap_PyRdAxzTPlawt
Pros:
Perfect notch cutouts for all components.
Led notification cutout
Its fingerprint smudge proof and scratch resistant to certain degree
doesnt extend fully to the sides(like 1mm less to the screen in both sides) , hence it is compatible with all cases, without being lifted up.
It's actually affordable glass and not some cheap plastic
Cons:
Proper installation kit not given
The black lining covers up approx <1mm of screen on sides.(but not quite noticeable)
Is off by 0.5mm on top and bottom
2. Case:
Wellpoint Back Cover for POCO F1
http://dl.flipkart.com/dl/wellpoint...x?pid=ACCF866DSRQ9YUGM&cmpid=product.share.pp
Pros:
Very cheap
Perfect cut outs for jack, speakers, charging port
Volume buttons and power buttons give nice haptic feel
Due to its thickness, gives a considerable groove for cam protection
Nice matte finish(kindof)
Soft lining inside
Doesnt scratch.
Cons:
It doesn't fit as tight as it did in corners
(But this con actually helps in not lifting up tempered glass)
No premium feel
I suggest you go for kapaver. I only bought this cause kapaver was out of stock at that moment.
Heres is the link for pics. You decide finally.
https://drive.google.com/folderview?id=195m75C33pp7VCJfZHn9Eb6gWjqh4imyn
Last edited:
I just got the below and am very happy. Has full adhesive, perfect fit, no bubbles. I highly recommend these...
https://www.amazon.com/gp/aw/d/B07H2TV53B?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
https://www.amazon.com/gp/aw/d/B07H2TV53B?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
Got this but there is gap left on front camera top side. Dust gone inside and there is no way to clean it. Don't buy this.If you are still looking for Edge to Edge Tempered glass for Poco F1, then wait no more!
The first perfect cutting tempered glass is out now!
Buy Now: https://glazedinc.com/collections/products/products/poco-f1-full-glue-edge-to-edge-glass?aff=12
Wait! We have a suprise for you
Use " POCOF1OFFICIAL " Promo-Code during checkout to get extra 10% Off!
Exclusive for this group members!
You can use any case with this, there won't be any issue
Yes.not physical cuts, but cutout in the black part of tempered glass.
got it today, cutouts are perfect cam, ir led... also its like 1mm in total to "small" so it shouldn´t have any problems with cases.
quite thick and i had no problems with getting it on the phone (which means something
).got just 1 phone / cam atm so i can´t really take pictures - tryed mirrors but you don´t really see much
Are there cutouts for everything in the notch? Most protectors don't have a cutout for the selfie cam and after a while I ALWAYS get dust in front of the camera.got it today, cutouts are perfect cam, ir led... also its like 1mm in total to "small" so it shouldn´t have any problems with cases.
quite thick and i had no problems with getting it on the phone (which means something
got just 1 phone / cam atm so i can´t really take pictures - tryed mirrors but you don´t really see much
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone