Anyone replace a digitizer on a sensation yet?

[derksend]

I going to try that one my replacement screen was a sw10 the original is a ruicacichia 94v

Here's someone in Singapore selling
PYD V1.0
E219454<>1
ruICACichia
94V-0 1115

Very close to yours...
http://bit.ly/pSKK4S

What was the model number of the replacement you tried which didn't work?

Sent from my MZ601 using XDA App

 

[nonione]

Any success???

Sent from my HTC Vision using XDA App

 

[jriv]

just replaced mine with one from eBay and lock screen problems with mine too

 

[Equinox102]

just replaced mine with one from eBay and lock screen problems with mine too

Can you quote the part numbers of both your original digitzer and the replacement for us?

 

[derksend]

My sensation is going to htc tomorrow i will see what digitizer there going to use. I will post the specs of there replacement digitizer when I've got itback

Sent from my MZ601 using XDA App

 

[shawndh]

I got one to work!!!

I bought one from Hong Kong with the T-Mobile logo and it worked! I told a local supplier about it and he ordered some but from a different supplier and his screens worked too. They were on ebay for $39 but they bumped the price up to $45 and they take forever to get here. I waited like 2.5wks. But they do work. Here is the supplier in Hong Kong:
http://www.ebay.com/itm/TOUCH-SCREE...545?pt=LH_DefaultDomain_0&hash=item2a110247c1

And here is a US supplier here in GA that has them:
http://www.ebay.com/itm/OEM-NEW-T-M...279?pt=LH_DefaultDomain_0&hash=item3f0dbea7e7

You're better off getting them from AskTronics since they're a US seller and the price is now the same anyway. But I've been to their shop and tried their screens and they work.

Another twist to this issue is that this same shop had a guy come in and install the plain HTC digitizer on a T-Mobile Sensation and it worked perfectly. So I don't know. Some work, some don't. I've got two Sensations and they only work with the T-Mobile branded digitizers.

 

[nonione]

and both of your sensations are from tmobile? Did you by any chance got to see the numbers of the digitizers? The originals and the ones u bought?

Sent from my HTC Vision using XDA App

 

[shawndh]

and both of your sensations are from tmobile? Did you by any chance got to see the numbers of the digitizers? The originals and the ones u bought?

Sent from my HTC Vision using XDA App

Yea, both of the phones are T-Mobile Sensations. I have both screens. Here are the part#'s I have:

HTC branded:(written on cable)
PYD V1.0
E21945 1
ICAC ichia
94V-0 1112

(written on chip)
8CTMA340
1043 D 04
-48LQI-09
CYP656805
PHI

HTC/T-Mobile branded:
(written on cable)
PYD V1.0
E21945 1
ICACichia
94V-0 1115

(written on chip)
8CTMA340
48LQI-09
1107 D 04
CYP608303
PHI
164

This is my best interpretation. These letters are small as heck!

 

[shawndh]

Do we know what the actual part# is? I have a bunch of lines of numbers but I'm not sure which one is the actual part#. It seems it will depend on which screen version you had originally. Unfortuately, I don't have the original screens to compare. I just have some screens that work and others that don't work on my two Sensations.

 

[nonione]

well it seems that from what ive read on this thread that t-mobile sensation uses:

PYD V1.0
SW-10 94V-0
E308252.1117

(the digitizer replacement doesnt necesarily say t-mobile on the top)

 

[deschenes]

ok guys i have few question for you...

i broke my digitizer on my sensation so bougth a new on

my oem digizitizer part number is

pyd v1.0
sw-10 94v-0
ew08252 1111

and i bougth this one that you linked from asktronic

if i understand what you said... i have a t mobile sensation beacause of th part number of the digitizer but i don't have the t-mobile logo on the corner of the oem digitizer?

i don't realy understand what is the diference whit t-mobil phone and no t-mobile phone and how to indentify them

just want to be sure that bougth the good digitizer!

 

[jriv]

So if I buy the one with the T-Mobile logo it will work properly.cause I installed the HTC one and the lockscreen is laggy

Sent from my HTC Sensation 4G using xda premium

 

[conner727]

same problems here. The digitizer i ordered off ebay had tmobile in the upper right and htc in the upper left. same unresponsiveness as everyone else though. must be a fake from china or something. Heads up if your buying on ebay.

 

[nonione]

ok guys mine came in the mailbox today bought it off ebay from seller "yallstock" which has been mentioned here before and i received:

PYD V1.0
E219454<>1
ruICACichia
94V-0 1112

and mine is:

PYD V1.0
E219454<>1
ruICACichia
94V-0 1115

anddddd it didnt work same problem as everyones

someone mentioned here yallstock sends the 01115 one but i received a 01112 one

im gonna try buying another one cept this time ask the seller for a 01115 one it has to work!!!

 

[Droidicus]

Thank you Guinea pigging this!

Sent from my HTC Sensation 4G using XDA App

 

[vvv1vvv]

Got it working too!

I can confirm the digitizers that worked for shawndh are working for me too. No more delays!
Check post #66 on this thread. I bought the one from the US supplier (e-bay member ask_tronics) as i didn't want the t-mobile logo on it. Took 10 days to get it in Europe.

Many thanks to shawndh for spotting them and posting here.


Here's the part no. (on cable) of the working digitizer:

PYD_6042A_FPC REV: A
mK VS T<>2
VTM-0 XT6043C09A

 

[Equinox102]

What were the numbers on your original smashed digitizer for reference?

 

[vvv1vvv]

What were the numbers on your original smashed digitizer for reference?

Sorry, i didn't keep the original. I only have the second digitizer that lagged (bought on ebay from yallstock), see details below.


Avoid this one:

PYD 1.0
E219454<>1
ICAC ichia
94V-01112

 

[hello00]

can anyone else confirm that?

 

[RChadwick]

I broke my HTC Sensation screen as well. I bought a screen on Ebay from Mengtorusa in California. It's labeled with HTC and T-Mobile, but based on the numbers, it looks like it won't work. Here's the new digitizer details:

(Numbers were on the opposite side of the cable, not the black side)
PYD_6042A_FPC Rev ?? (Covered by warranty sticker)
nK VS T<>2 VTM ???? (Covered by warranty sticker)

My original screen is:
PYD V1.0
SW-10 94V-0
E308252 1113

I've also noticed there are minor differences in the traces on the back of the screen. If anyone's interested, I'll post pictures.

When discussing screen compatibilities, it might help if everyone mentions what country you're from. Different version phones likely went to different countries, and saying a certain screen works in your phone might not be so helpful to someone in the States if you're from Europe. BTW, I'm in the US.

Also, I don't remember where, but in my hours of trying to research this, I came across a mention there was a difference between an HTC Sensation, and an HTC Sensation 4G. Maybe the 4G is T-Mobile only? Or US only?

I'm wondering if a screen recalibration might fix things? I'm using a Dell Streak as my spare until I get my Sensation working, and if you hold certain buttons while turning on, and enter a code, you get to a menu where you can check and calibrate just about everything, including the touch screen. Maybe this delay is really a recalibration when the phone realizes the stored parameters are not working? It would make sense, as I'm sure power is cut to the digitizer when the screen goes black, and if the stored parameters don't work, the screen recalibrates on the fly, and those settings may last until it loses power. Does anyone know if the Sensation has a Diag menu?