AOSiP 9.0 [Official][Crosshatch/Blueline][OTA]

[kingrat]

i want to degoogle my phone - pixel 3 xl - is this a good rom for that?

 

[frewys]

i want to degoogle my phone - pixel 3 xl - is this a good rom for that?

I'll sell you my p20 pro. Should be truly degooglified shortly ?
But on a more current note I would try one of the clean treble ROMs out there. Don't think there is a truly Google free pixel rom except the treble ROMs

 

[xlxfoxxlx]

new build is up with july patches, remember to update firmware/vendor when updating

 

[ksergey2012]

new build is up with july patches, remember to update firmware/vendor when updating

Firmware from 07/03 is not working. After flashing, the phone cannot boot into the system. Be careful!

 

[SacredDeviL666]

Firmware from 07/03 is not working. After flashing, the phone cannot boot into the system. Be careful!

care to share the steps you followed to flash latest update?

 

[houbaba]

No problem for me. Clean flash since stock july.

Envoyé de mon Pixel 3 en utilisant Tapatalk

 

[airmaxx23]

I recently installed the June build and was wondering what I need to do to flash the July OTA update.

 

[ksergey2012]

care to share the steps you followed to flash latest update?

The algorithm for installing the firmware has not changed since the output of the AOSIP ROM, namely: clearing the cache and system from TWRP, installing the firmware, clearing the cache, installing the TWRP, clearing the cache, installing Vendor.img, then restarting from TWRP in the TWRP, clearing the cache, installing the Magisk , clearing the cache and rebooting into the system. But the system does not boot, the owl flashes endlessly.

 

[SacredDeviL666]

The algorithm for installing the firmware has not changed since the output of the AOSIP ROM, namely: clearing the cache and system from TWRP, installing the firmware, clearing the cache, installing the TWRP, clearing the cache, installing Vendor.img, then restarting from TWRP in the TWRP, clearing the cache, installing the Magisk , clearing the cache and rebooting into the system. But the system does not boot, the owl flashes endlessly.

Avoid flashing magisk or custom kernels before the first boot is complete.

this is what I do and goes smoothly. reboot bootloader-flash the system image without -w(you could replace by manually flashing firmware/vendor images/ - reboot - boot back to bootloader - temp boot twrp - flash twrp zip - flash rom boot - give it a while for the OWL to do its job.

Then boot back and flash magisk/kernels so forth. (above is a dirty flash procedure) and I am running july patch without any loops or stuck in system

 

[ksergey2012]

care to share the steps you followed to flash latest update?

Avoid flashing magisk or custom kernels before the first boot is complete.

this is what I do and goes smoothly. reboot bootloader-flash the system image without -w(you could replace by manually flashing firmware/vendor images/ - reboot - boot back to bootloader - temp boot twrp - flash twrp zip - flash rom boot - give it a while for the OWL to do its job.

Then boot back and flash magisk/kernels so forth. (above is a dirty flash procedure) and I am running july patch without any loops or stuck in system

Before the firmware from 07/03, there was never a problem when upgrading. I installed the original July firmware via flash-all.bat, then again tried to install AOSIP ROM, Magisk did not install it anymore. The result is the same - the system does not boot. This has never happened before, something wrong with the latest firmware.

 

[glehel]

Before the firmware from 07/03, there was never a problem when upgrading. I installed the original July firmware via flash-all.bat, then again tried to install AOSIP ROM, Magisk did not install it anymore. The result is the same - the system does not boot. This has never happened before, something wrong with the latest firmware.

I just made a clean installation on the factory in July. Perfectly loaded and running. I had a factory reset from the factory recovery. And wipe system / data / cache partition.

 

[SacredDeviL666]

Before the firmware from 07/03, there was never a problem when upgrading. I installed the original July firmware via flash-all.bat, then again tried to install AOSIP ROM, Magisk did not install it anymore. The result is the same - the system does not boot. This has never happened before, something wrong with the latest firmware.

negative. there is nothing wrong with the firmware or the Jul build of AOSIP

ensure the rom is flashed on both slots try to flash on both slots this sometimes could be the reason.

 

[saxmydix]

Just reporting some bug, this is using system theme, now playing history text can't be read.

 

[xlxfoxxlx]

there was an issue with russian language causing a system crash so it has been fixed and new builds are up

 

[airmaxx23]

When downloading the update through the updater in the settings where is the file stored?

 

[ksergey2012]

new build is up with july patches, remember to update firmware/vendor when updating

there was an issue with russian language causing a system crash so it has been fixed and new builds are up

Thank! Now everything is great!

 

[trignogd]

there was an issue with russian language causing a system crash so it has been fixed and new builds are up

Work perfect thx for this great rom

 

[xlxfoxxlx]

When downloading the update through the updater in the settings where is the file stored?

Data/aosip_updates

 

[eldode]

I just installed ASOiP june yesterday
Now it give me that july update is available
Do i install it directly over june or it will bootloop

 

[c_86]

Anyone got a link to the firmware? Would rather not do a flash all if I don't need to

Edit. Nevermind