[AOSP 10.0] [29-05-2020] Quack Phh-Treble GSI v217 Repack For Exynos S20 Devices

[firefds]

Hello everyone!

I have repacked @phhusson 's Quack Phh-Treble GSI to a flashable TAR file that we can flash on the S20 devices.
For more info about Quack Phh-Treble GSI check this thread here - https://xdaforums.com/project-trebl...velopment/aosp-10-0-quack-phh-treble-t3992559

What doesn't work?
Auto brightness
Fingerprint enrolment works 50% on first boot and randomly works when screen is off
Reports about MTP not working - could be a driver issue
NFC

For a full list of issues, check the official github - https://github.com/phhusson/treble_experimentations/issues

What works?
Everything else!

Found something else that doesn't work? Let me know and I'll update the thread.

What do these repacks include

• The official release of Quack Phh-Treble GSI with Gapps (system-quack-arm64-ab-gapps.img)
• Cross Device Lineage Recovery Flashable - Phh SYSTEM image only!

Downloads
Download Quack_Phh-Treble_GSI_v217zip from:

• Mega - https://mega.nz/file/dowXRSYT#LaJSGNelVxPcerNkyN2QQVIYKos4Eea_dH10PId2JsM
• AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261820046

How to install

1. If you are not rooted - follow Jesec's guide on how to root your device. Make sure you boot into setup at least once! - https://xdaforums.com/galaxy-s20/how-to/howto-root-s20-series-upgrade-firmware-t4079353
2. If you do not have Lineage Recovery - again, follow Jesec's guide on how to install Lineage Recovery - https://xdaforums.com/galaxy-s20/development/recovery-lineage-recovery-s20-series-t4086223
3. Enter Recovery Mode and factory reset your device
4. Copy Quack Phh-Treble GSI v216.zip onto your external SD
5. In Lineage Recovery, choose Apply update
6. Choose Apply from disk
7. Choose Quack_Phh-Treble_GSI_v216.zip
8. Once installation is complete, reboot to system

Previous Versions
v216

• Mega - https://mega.nz/file/g5RUHCID#1LqTrVnRotQwb5vLQQ0TGDN4vtgx4N4aHJza3yZkvU0
• AndroidFileHost - https://www.androidfilehost.com/?fid=4349826312261800816

Screenshots

Credits
@phhusson for the Quack Phh-Treble
@jesec for root guids, Lineage Recovery, binary-update and help with creating the flashable zip

Have fun!!

 

[ASHLEY117]

Here we go! Fantastic work and gladly tested for a legend

 

[Dennis weigh]

Finally seeing someone making a custom ROM. Nice work! I will grateful if you could repack the Pixel Experience to .tar file.

 

[phhusson]

Finally seeing someone making a custom ROM. Nice work! I will grateful if you could repack the Pixel Experience to .tar file.

You could try using DSU https://developer.android.com/topic/dsu

 

[yodainascoda]

You could try using DSU https://developer.android.com/topic/dsu

cheers mate nice

 

[VolRepth]

Does it work on the S20 Ultra?

 

[firefds]

Does it work on the S20 Ultra?

Works on all devices

 

[Smturbo]

Installation went smoothly. It works fine, but the screen only displays 48 hertz. also did not find the change of control points

 

[Akutsito]

You should be able to flash whatever other GSI Image on top of this right? Sorry, GSI noob here.

 

[speedyjay]

So i got it booted. 120hz doesnt work either. displayhz.com says i'm only getting 48hz....

 

[speedyjay]

I would highly vouch for this ROM if the refresh rate was higher. Unfortunately, their is no way to enable any kind of higher refresh rate. For that reason, I'm going back to stock until something else comes along. Nice work though OP

 

[NisseGurra]

Try:


adb shell settings put system peak_refresh_rate 96.0

adb shell settings put system min_refresh_rate 96.0

 

[speedyjay]

Try:


adb shell settings put system peak_refresh_rate 96.0

adb shell settings put system min_refresh_rate 96.0

I appreciate the response mate. Nope, doesnt work

 

[phhusson]

I would highly vouch for this ROM if the refresh rate was higher. Unfortunately, their is no way to enable any kind of higher refresh rate. For that reason, I'm going back to stock until something else comes along. Nice work though OP

What does treble setting give?

 

[speedyjay]

What does treble setting give?

Sorry bud? I'm new to GSI's can you explain?

Sent from my [device_name] using XDA-Developers Legacy app

 

[phhusson]

Sorry bud? I'm new to GSI's can you explain?

In Settings => Treble Settings => Misc you can select FPS

 

[speedyjay]

In Settings => Treble Settings => Misc you can select FPS

I tried them all and none of the options worked buddy.

Sent from my [device_name] using XDA-Developers Legacy app

 

[arknailed7754]

Besides the refresh snag that no doubt will get ironed out, what's the rom like..

Obviously the camera will be on everyone's minds

 

[speedyjay]

Besides the refresh snag that no doubt will get ironed out, what's the rom like..

Obviously the camera will be on everyone's minds

ROM works incredibly well. Camera's - the ultrawide works as well as the regular camera. 100X gimmicky, usless, cant do anything with camera doesnt work lol I'm sure the refresh rate bug will be ironed out. Also, video recording doesnt work. Well, it does but when you play it back, it sounds like it was recorded by the chipmunks on crack! lol

 

[ngoralph]

ROM works incredibly well. Camera's - the ultrawide works as well as the regular camera. 100X gimmicky, usless, cant do anything with camera doesnt work lol I'm sure the refresh rate bug will be ironed out. Also, video recording doesnt work. Well, it does but when you play it back, it sounds like it was recorded by the chipmunks on crack! lol

how about the quality tgough similar to stock?