Development [AOSP-11] [OFFICIAL] Samsung SM-A125F TWRP

Search This thread
By:
Advanced…
D

doudeaboe

New member
Oct 11, 2022
3
0
edward0181 said:
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS

Install instructions:

1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android version is 11. I used A125FXXU2BVB4 firmware.

2. Clean install firmware (means, no magisk boot module, etc. Flash with ODIN full firmware (BL, AP, CP and CSC _A125FXXU2BVB4*.TAR.MD5. Tick in ODIN options: NAND ERASE; Re-partition. Make sure AUTO REBOOT is OFF!!!

3. Let ODIN flash all, on completion, click reset, disconnect and connect USB, Select recovery.img (below post) in AP slot, and nulled VBMETA.img (below) in USERDATA slot. again; Make sure AUTO REBOOT is OFF!!!

4. Let ODIN flash all. Once all succeeded; Hold <VolDn> + <Power> to shut down, then Hold <VolUp> + <Power> to reboot to TWRP

5. Once TWRP has booted, do full factory reset (wipe caches and data). After that, format data completely. Reboot to recovery once done.

6. Once TWRP has re-booted, go to advance, terminal and execute command: multidisabler.
This will protect data partition from becoming encrypted again, and secure recovery partition from being replaced.

7. Reboot to system, and setup device as normal. After this, you could install Root or what ever you want.

Important: device must boot directly to recovery or stock recovery will be restored if you boot direct to OS.

8. Enjoy!👍🏻😎

What is working:
Mounting, flashing *.img to superpartitions, MTP also fixed now.

What is not working:
ADB sideloading;
You tell me...


Samsung Galaxy A12

Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me

Device tree: https://github.com/edward0181/android_device_samsung_a12
Kernel tree: https://github.com/00p513-dev/android_kernel_samsung_a12
Click to expand...
Click to collapse
do you have a TWRP available for SM-A127M SW REV 0x5? if not, could you make one?
 
Last edited:
charlis88

charlis88

Senior Member
Oct 20, 2020
52
1
7
my phone still version A125FXXU2BVB4 . . . .

#ask
if i am use twrp-3.7.0_11-0-a12.img , and install magisk can be have issue about imei baseband ....??

anyone have try install magisk without missing imei . . . .???

cause have watch some people lose imei after install magisk samsung A125FXXU2BVB...

thanks for reply
 
mhmd__chehab

mhmd__chehab

Member
Feb 13, 2023
5
0
edward0181 said:
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS

Install instructions:

1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android version is 11. I used A125FXXU2BVB4 firmware.

2. Clean install firmware (means, no magisk boot module, etc. Flash with ODIN full firmware (BL, AP, CP and CSC _A125FXXU2BVB4*.TAR.MD5. Tick in ODIN options: NAND ERASE; Re-partition. Make sure AUTO REBOOT is OFF!!!

3. Let ODIN flash all, on completion, click reset, disconnect and connect USB, Select recovery.img (below post) in AP slot, and nulled VBMETA.img (below) in USERDATA slot. again; Make sure AUTO REBOOT is OFF!!!

4. Let ODIN flash all. Once all succeeded; Hold <VolDn> + <Power> to shut down, then Hold <VolUp> + <Power> to reboot to TWRP

5. Once TWRP has booted, do full factory reset (wipe caches and data). After that, format data completely. Reboot to recovery once done.

6. Once TWRP has re-booted, go to advance, terminal and execute command: multidisabler.
This will protect data partition from becoming encrypted again, and secure recovery partition from being replaced.

7. Reboot to system, and setup device as normal. After this, you could install Root or what ever you want.

Important: device must boot directly to recovery or stock recovery will be restored if you boot direct to OS.

8. Enjoy!👍🏻😎

What is working:
Mounting, flashing *.img to superpartitions, MTP also fixed now.

What is not working:
ADB sideloading;
You tell me...


Samsung Galaxy A12

Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me

Device tree: https://github.com/edward0181/android_device_samsung_a12
Kernel tree: https://github.com/00p513-dev/android_kernel_samsung_a12
Click to expand...
Click to collapse
is there a twrp for android 12 sm-a12f (unofficial)?
 
Amirt2008

Amirt2008

Member
May 23, 2022
6
0
edward0181 said:
DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS

Install instructions:

1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android version is 11. I used A125FXXU2BVB4 firmware.

2. Clean install firmware (means, no magisk boot module, etc. Flash with ODIN full firmware (BL, AP, CP and CSC _A125FXXU2BVB4*.TAR.MD5. Tick in ODIN options: NAND ERASE; Re-partition. Make sure AUTO REBOOT is OFF!!!

3. Let ODIN flash all, on completion, click reset, disconnect and connect USB, Select recovery.img (below post) in AP slot, and nulled VBMETA.img (below) in USERDATA slot. again; Make sure AUTO REBOOT is OFF!!!

4. Let ODIN flash all. Once all succeeded; Hold <VolDn> + <Power> to shut down, then Hold <VolUp> + <Power> to reboot to TWRP

5. Once TWRP has booted, do full factory reset (wipe caches and data). After that, format data completely. Reboot to recovery once done.

6. Once TWRP has re-booted, go to advance, terminal and execute command: multidisabler.
This will protect data partition from becoming encrypted again, and secure recovery partition from being replaced.

7. Reboot to system, and setup device as normal. After this, you could install Root or what ever you want.

Important: device must boot directly to recovery or stock recovery will be restored if you boot direct to OS.

8. Enjoy!👍🏻😎

What is working:
Mounting, flashing *.img to superpartitions, MTP also fixed now.

What is not working:
ADB sideloading;
You tell me...


Samsung Galaxy A12

Disclaimer:Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no ...
twrp.me

Device tree: https://github.com/edward0181/android_device_samsung_a12
Kernel tree: https://github.com/00p513-dev/android_kernel_samsung_a12
Click to expand...
Click to collapse
How can I remove vmbeta ? I want to remove it , because my kg rmm is loked and
I can't start my phone !
 
You must log in or register to reply here.

Similar threads

cldkrs
How To Guide How To: Root Galaxy A12 | SM-A125F/DSN
Replies
94
Views
73K
TheWorldYT
TheWorldYT
physwizz
Development [ROOT] [TWRP] [KERNEL] [GSI] for SM-A127f (a12s)
Replies
221
Views
32K
physwizz
physwizz
edward0181
Development [AOSP-11] [UNOFFICIAL] Samsung SM-A127F TWRP
Replies
69
Views
12K
DaReDeViL
DaReDeViL
C
Question [SOLVED] Samsung A12 / SM-A127F/DSN - Root problem
Replies
42
Views
23K
Armyboii
Armyboii
hd_scania
  • Locked
Development [AOSP-11] [UNOFFICIAL] [SW REV 1] Samsung SM-A125F TWRP
Replies
9
Views
7K
DaReDeViL
DaReDeViL

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 9
    edward0181
    edward0181
    DISCLAIMER: I WAS NEVER, HAVE NEVER BEEN, AND WILL NEVER BE RESPONSIBLE OF ANY DAMAGES AGAINST YOUR DEVICES BY YOUR OWN MIS-OPERATIONS

    Install instructions:

    1. Download an arbitrary SM-A125F firmware zip package on SamMobile.com, whose Android version is 11. I used A125FXXU2BVB4 firmware.

    2. Clean install firmware (means, no magisk boot module, etc. Flash with ODIN full firmware (BL, AP, CP and CSC _A125FXXU2BVB4*.TAR.MD5. Tick in ODIN options: NAND ERASE; Re-partition. Make sure AUTO REBOOT is OFF!!!

    3. Let ODIN flash all, on completion, click reset, disconnect and connect USB, Select recovery.img (below post) in AP slot, and nulled VBMETA.img (below) in USERDATA slot. again; Make sure AUTO REBOOT is OFF!!!

    4. Let ODIN flash all. Once all succeeded; Hold <VolDn> + <Power> to shut down, then Hold <VolUp> + <Power> to reboot to TWRP

    5. Once TWRP has booted, do full factory reset (wipe caches and data). After that, format data completely. Reboot to recovery once done.

    6. Once TWRP has re-booted, go to advance, terminal and execute command: multidisabler.
    This will protect data partition from becoming encrypted again, and secure recovery partition from being replaced.

    7. Reboot to system, and setup device as normal. After this, you could install Root or what ever you want.

    Important: device must boot directly to recovery or stock recovery will be restored if you boot direct to OS.

    8. Enjoy!👍🏻😎

    What is working:
    Mounting, flashing *.img to superpartitions, MTP also fixed now.

    What is not working:
    ADB sideloading;
    You tell me...


    Samsung Galaxy A12

    Disclaimer:Team Win strives to provide a...
    twrp.me

    Device tree: https://github.com/edward0181/android_device_samsung_a12
    Kernel tree: https://github.com/00p513-dev/android_kernel_samsung_a12
    View
    3
    edward0181
    edward0181
    For those who wants to install GSI, etc:

    Boot to recovery, flash IMG and select what partition you want to flash to.

    No need for aditional tools with latest update.
    View
    3
    edward0181
    edward0181
    LAST_krypton said:
    Any pictures of the twrp it self? I'm curently testing something on android 10 and I don't want to revert back to android 11 yet.
    Thanks.
    Click to expand...
    Click to collapse
    IMG-20210809-WA0001.jpg
    View
    2
    edward0181
    edward0181
    10/05/2022
    Rebuild kernel to fix issues with dynamic partitions. Backups and flashing img now doesn't break twrp and doesn't reboot anymore.

    17/04/2022
    Updated with latest FSTAB issues.
    Will fix not being able to flash GSI to system partitions etc.

    Will be online in TWRP.ME downloads soon, but below post is most recent.
    https://eu.dl.twrp.me/a12/ Can be flashed from current recovery (TWRP) as IMG into recovery slot.

    12/04/2022
    Rebuild from A125FXXU2BVB4 firmware. Updated kernel to custom kernel. Modified FSTAB points to flash *.IMG files to dynamic partitions. Fixed FBE decryption of data partition.

    04/10/2021
    Updated to fix being able to install GSI in system-image partition. See below post

    15/09/2021
    * Fixed MTP, mount points of Dynamic_Partitions. All is working now, except Decrypting. As mentioned earlier, not important now as you can use OTG, or External_SD or MTP.

    15/09/2021
    * Redid whole tree, fixed partition errors. Works as system_root.
    * FSTAB fixed
    Still data decrypt issues, MTK is a pain... not important now, when using external_sd

    20/08/2021
    * Fixed FSTAB issues.
    * Fixed Sideload and ADB issues
    * Mounts of partitions fixed

    Still to do: Decryption of DATA partition failing as soon as stock ROM is factory resetted. WIP.

    09/08/2021
    Initial entry; decrypt isn't working.
    Is still Work in Progress.
    to be updated
    View
    2
    edward0181
    edward0181
    Did update today.
    All except decrypt data... not important this stage as long as you use a external SD card.
    View

New posts