[AOSP 8.1] [2019-03-06] Phh-Treble

[Snaut1]

delete

 

[Tmyol]

There are five problem in latest rom that I found:
1.Caller ringer output is accompanied by "Drips"
2.Bluetooth often shows that it has stopped running when it is off.
3.Battery usage is not specifically displayed.
4.The dark wallpaper drop-down menu under Android 8.1 does not switch to dark.
5.Charging without sound.
I hope you can Solve these problem in next Update，
i am using honor 7x in this room,i really like it.:fingers-crossed::fingers-crossed::fingers-crossed:

 

[aouerfelli]

There are five problem in latest rom that I found:
1.Caller ringer output is accompanied by "Drips"
2.Bluetooth often shows that it has stopped running when it is off.
3.Battery usage is not specifically displayed.
4.The dark wallpaper drop-down menu under Android 8.1 does not switch to dark.
5.Charging without sound.
I hope you can Solve these problem in next Update，
i am using honor 7x in this room,i really like it.:fingers-crossed::fingers-crossed::fingers-crossed:

This should fix some of your problems: https://xdaforums.com/honor-7x/development/overlay-dil3mm4-s-overlays-bond-series-t3815504
Most of the problems aren't because of the ROM, but because of the way manufacturers implemented Treble for their devices.

 

[Tmyol]

This should fix some of your problems: https://xdaforums.com/honor-7x/development/overlay-dil3mm4-s-overlays-bond-series-t3815504
Most of the problems aren't because of the ROM, but because of the way manufacturers implemented Treble for their devices.

Thanks，i flash the zip.but nothing has been fixed.

 

[xpsviewer]

SD Card problems on redmi 4x [santoni]

I found this treble image is almost perfect for me but I found a glitch which matters.
The version I use is system-arm64-aonly-vanilla-nosu updated in 2018-7-3

Sometimes after boot from shutdown or every time boot from recovery the system will not recognize the SD card. It says 'SD card format not support' and then I can not format or do anything because the phone will crash and loop in Android logo. But after forced reboot It maybe works normally or still crash. I tried to format the card to ext4 but problem still just with a lower probability.
The original lineage os provided by remi4x's treble's author doesn't have such problem.
I don't know if my device's only problem or a generic one.
And I don't know what logs I can provide to help.
The stock los just from https://xdaforums.com/xiaomi-redmi-4x/development/treble-lineageos-15-1-beta-t3790991

Thanks for the dev's hard work and I hope any can help with this problem.

add a bug:
When enable power save, the image with launcher3 will have a launcher crash. other launchers don't have such prob.

 

[bieltv3]

For God's Sake!

I do not have the words to express my feelings on this. I am bieltv.3 and I was a young developer for CyanogenMod (KitKat version). Once we started developing custom ROMs, every device had their different drivers, their different camera sensors, different display configurations, closed common .so libraries... All the makefiles were full of if-else depending on each device you were building the ROM for.

I was fighting to bring Ice Cream Sandwich, the first Android OS made for armv7 devices to old armv6 ones... Years of work to make every driver to work... I do remember how we manage to write the whole .c camera library for a SAMSUNG device.

Seen the major improvement on development, as well as the chance for a united project for AOSP for most major devices running oreo makes me cry of joyness. Congratulations to the man in charge @phhusson and GOOGLE for being so smart on this...

I stopped developing ROMs when Cyanogen broke, but I think it may be time to contribute to this major project. It has given me the day! Will be buying soon an S9 and getting on to it asap.

 

[St.Noigel]

I have a Moto G6+ which has no real dev support! It probably never will because Moto/Lenovo chose not to release it in the US. Thanks to Gsi I can flash custom roms and thanks to Phh almost everything works. Fingerprint scanner does not work but Phh is working on it which makes since to do since other devices will surely use the same hardware for the fingerprint scanner at some point. At that point Bluetooth is the only thing partially broken that I have noticed. I can hear certain things through Bluetooth but not music. There are probably other things broken but in my 10 years of android modding that's pretty much always been the case. Hasn't stopped many people from enjoying roms to daily driver status. So if my somewhat obscure device can be mostly supported through the Gsi concept when no one wants to dev for the specific device, tell me how Gsi is a bad thing?

Sent from my moto g(6) plus using Tapatalk

I have the same issues on my Sharp Aquos S2 (SD630 too) on AOSP, RR, AICP, Havoc... (
Do you have sollution already?

 

[RandomQuezoPH]

Whats the Specific Magisk that works for Huawei P9? Can someone send it here, thank you!

 

[Rainick]

hi phhusson,thank you for you great work,this is really amazing.
but when i used it on huawei honor 8,i found the camera and flash light are not available,it said "can not contact camera."
i tested camera on LINEAGE and it worked pretty well, so i don't think it's hardware problem.
i hope you will fix this problem and i will keep focusing on this program.

add:i download system.img for A-only ARM64 devices with GApps and SU

 

[shizuni]

i tested camera on LINEAGE and it worked pretty well, so i don't think it's hardware problem.

Where did you get the apk of liniageOS camera?

 

[Rainick]

Where did you get the apk of liniageOS camera?

i flashed liniageOS and extracted the camera into apk,it can work on lineageOS,but still crashed on this AOSP.
i think it may be camera drive's problem

 

[Wirtos]

Just a few bugs on Redmi Note 4: time resetting to 00:30 after every reboot and apps not installing via Google play Market.
Sometimes, when i trying to install some apps, it's just showing "waiting for download" sign forever. Reboot fixes download bug, but it's randomly appearing after some time.

 

[CosmicDan]

i flashed liniageOS and extracted the camera into apk,it can work on lineageOS,but still crashed on this AOSP.
i think it may be camera drive's problem

It's a Vendor problem.

Reach out to your device development forum for developers to make a GSI Patch.

It's unreasonable to wait for Phh to try and fix every ODM's crappy Treble implementation, especially if he doesn't even have the device.

 

[Cường Hồ]

S7?, thanks

Gửi từ SM-G610F của tôi bằng cách sử dụng Tapatalk

 

[CosmicDan]

S7?, thanks

Yes, S7 is indeed a letter and a number.

You're welcome.

 

[Cường Hồ]

Yes, S7 is indeed a letter and a number.

You're welcome.

What do you mean? have the settings been for s7 do not you?

Gửi từ SM-G930F của tôi bằng cách sử dụng Tapatalk

 

[CosmicDan]

What do you mean? have the settings been for s7 do not you?

Read the OP. Compatibility is in the wiki Link.

Also, your signature breaks quoting in XDA Labs app. So don't be surprised if you sometimes get people ignoring you.

 

[edkmho]

Hey guys,
This is htc u11+.
First, I can't flash the aosp v22 with gapps + su due to fadtboot complain the the remote file is too large. It said that my partition is 13 Gb n d file is 1.5Gb. Therefore I'm only able to flash the vanilla rom. With the vanilla rom I can't do much as it doesn't has any apps to test. Please help me to flash or install gapps.

I have tried to use the command fastboot -S 512M flash system system.img to install the ststem image with the gapps + su.

 

[Tecalote]

Whats the Specific Magisk that works for Huawei P9? Can someone send it here, thank you!

You can use attached zip or you use Magisk 16.7 Beta (it should support Treble)

 

[CosmicDan]

Hey guys,
This is htc u11+.
First, I can't flash the aosp v22 with gapps + su due to fadtboot complain the the remote file is too large. It said that my partition is 13 Gb n d file is 1.5Gb. Therefore I'm only able to flash the vanilla rom. With the vanilla rom I can't do much as it doesn't has any apps to test. Please help me to flash or install gapps.

I have tried to use the command fastboot -S 512M flash system system.img to install the ststem image with the gapps + su.

Only 1.3GB? Not really anything you can do there except use vanilla. Or maybe you can use the Go variant (since that is obviously a low-end device).