If you're asking how to download, the APKs are in the first post or on GitHub.
How much idle drain is normal in an old device (Redmi Note 3 Pro running Havoc Q) which only supports the Tensor Low Power mode? I am seeing around 1.8%/h. The device is in Deep Sleep for 98-99% of the time. I use the app to turn off the screen as a fix for the replacement touchscreen which nowadays stops responding after sometime. The replaced Power button is not very good so the Tap, Tap app comes in very handy to reduce it's further wear and tear. I am using a Tasker Task to turn off the screen (input keyevent 26).
P.S. Idle drain otherwise is pretty good in this device. After being unplugged battery drops by 5-7% percent in a few hours and thereafter it's around 0.1-0.2 %/h.
P.S. Idle drain otherwise is pretty good in this device. After being unplugged battery drops by 5-7% percent in a few hours and thereafter it's around 0.1-0.2 %/h.
Last edited:
OK. A feature to disable the app for a specifed time period would have been handy in this case.
Hello!
I have been using this app for a few weeks now on my OnePlus Nord 2 on Android 11 (OxygenOS). So far it's been running great! However, I noticed some bug (or is it? Maybe it's just on my end, I dunno if anyone else is experiencing this) when using either the double or triple tap to open the notification/quick settings panel. I'd say around 30% of the time it works great, but most of the time it triggers a "back button" press, as if I've set the double tap to back button, even if it was set to opening the notifications panel. If this is an issue with the app, I hope it gets fixed sometime. Aside from this issue, it's been great for me!
Thanks!
I have been using this app for a few weeks now on my OnePlus Nord 2 on Android 11 (OxygenOS). So far it's been running great! However, I noticed some bug (or is it? Maybe it's just on my end, I dunno if anyone else is experiencing this) when using either the double or triple tap to open the notification/quick settings panel. I'd say around 30% of the time it works great, but most of the time it triggers a "back button" press, as if I've set the double tap to back button, even if it was set to opening the notifications panel. If this is an issue with the app, I hope it gets fixed sometime. Aside from this issue, it's been great for me!
Thanks!
Unfortunately there's no system API for knowing whether the status bar / QS is expanded, it relies on accessibility labels which don't work on all devices. Given Oxygen OS is so far away from AOSP nowadays, that's probably not working on your device and it's not knowing that the panel is already closed.
A workaround would be to follow up the "open" double tap with a "close" one once you're done, which should keep the app in sync and the next time it will open again.
Hey there, I m using Motorola G22 with android 12, but it's not working. I have even enabled accessibility but still not working. Please help @Quinny899
Damnn
, I was so excited for this ? And i have all necessary requirements such as accelerometer and gyroscope etc. If you could help me out with this, I will be really thankful for this
I can't help, it's a device incompatibility. OEMs break stuff sometimes.Damnn
. Great jobDo you think it could be solved if I flash somd custom rom in my device ? Its near stock android right now.
Possibly, though I don't think I've heard any cases of that fixing it for others. Usually sensor code is proprietary and custom ROMs don't change that.
I have the Samsung Galaxy S22 Ultra (Using Nova Launcher) and it works wells. The only issue I encounter that I know so far is the app gates where you can add a app to block it it or when the keyboard is open. (Using SwiftKey Keyboard.) Not sure if it has to do with Noble launcher or my keyboard because I don't know if it's been customized for specific launchers and keyboards.
But I am able to triple tap to enable my flashlight on the back. When I out specific apps into the gate list to block the flashlight from coming on or have the keyboard open gate where it locks it from being used while the keyboard is open it's still triggers the flashlight when I do a triple tap.
But I am able to triple tap to enable my flashlight on the back. When I out specific apps into the gate list to block the flashlight from coming on or have the keyboard open gate where it locks it from being used while the keyboard is open it's still triggers the flashlight when I do a triple tap.
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
406Tap, Tap is a port of the double tap on back of device gesture from Pixels running Android 12 to any Android 7.0+ device*.
Tap, Tap provides over 50 actions that can be run from double or triple taps on the back of your device, including:
- Launching an app
- Launching a shortcut
- Toggling the flashlight
- Simulating button presses, such as home or back
- Running a Tasker task
- Quick Tap to Snap**
The gesture can also be fully controlled, to only run under certain conditions, or run different actions in different scenarios; such as only when an app is running, the screen is off, or when listening to music (many more options are available).
The sensitivity and response of the gesture can be controlled, picking from 8 "models", trained for devices ranging in size from 5.7" to 6.3" in height, as well as finer control of the sensitivity of gesture detection, meaning there is a configuration that will work well for most devices.
Tap, Tap also tries to be easy on the battery, only running the gesture detection when required, and integrates with the "low power mode" available on select Pixel devices, otherwise using the lower-power machine learning capabilities of devices, where available.
* Your device must have an accelerometer and gyroscope.
** Requires a compatible Pixel device or root, see this page for more info.
Screenshots:
Example video, showing launching the camera on double tap
Changelog said:
Download:
Version 1.5
GitHub:
https://github.com/KieronQuinn/TapTap
Reporting Issues & Feature Requests
If you have encountered a crash or error, please make an issue on the GitHub Issues page. For crashes, include a crash report, which Tap, Tap should create for you and show a notification after a hard crash (enable the option on the "More" page first if you have disabled it). Before making an issue, make sure it has not been reported before, and does not fall under the "service killed" pinned issue, as those will be closed and ignored.
To request a feature, either make an issue stating "Feature Request", or post a reply in the XDA thread. Note that only relatively simple features will be considered, anything more complex including toggling specific system features should be done using the Tasker capabilities of Tap, Tap, as the app is not meant to be a Tasker replacement.33New version: 0.6 Alpha
Changelog said:
Download version 0.6 Alpha (also in first post)
Example of requirements, which I'm currently using on my device (click to enlarge):
What it does:
- If Pokemon GO is being played -> Run a Tasker task that starts the CalcyIV overlay
- Otherwise, if Music is playing -> skip to the next track
- Otherwise, if a headset is connected -> play the track (this will never pause as the previous action would've been run)
- Otherwise, if the screen is off -> toggle the flashlight
- Otherwise -> launch Spotify
Remember, once an action has been run successfully, no further actions below it will be run. Place your highest priority actions at the top, and work your way down setting up requirements for each action until the last one, which is always the "last resort" and will only be run if all the other actions' requirements are not met.
If you have some other great ideas of how to make the most out of this new feature, share them in this thread!
