Hello out dare,
This is my first release of the GPS Logger, a GPS tracking program.
Please try it and let me know if you like it
Rob
https://sites.google.com/site/radapplications/home/gps-logger
The program:
The primary feature of the program is to record and log waypoints, this can be a single point or more than one, in that case the output wil be a track containing more points.
Features:
Options:
This is my first release of the GPS Logger, a GPS tracking program.
Please try it and let me know if you like it
Rob
https://sites.google.com/site/radapplications/home/gps-logger
The program:
The primary feature of the program is to record and log waypoints, this can be a single point or more than one, in that case the output wil be a track containing more points.
Features:
- Current position
- The number of satellites
- The interval (in seconds) before the next GPS location is determined
(When the device is cradled and charging, the interval is always 1 second) - The current speed you are going
- The altitude, comparison with sea level
- The number of points recorded for a track (or 1 if a single waypoint has been selected)
Options:
- Start GPS automatic
If selected the GPS is automatic connected when the program starts - Start logging automatic
If selected the logging is started immediately when the program starts - Keep the device active
If selected the device is kept alive by means of the 'KeepAlive' program call and setting the Backlight to ON - Go to today screen when logging
If selected the device is switched to the today screen when logging starts
I added this option when using the program in combination with Wisbar Advance Desktop where I use the a 'Lock Page' as today screen.
In that screen all keys are locked and via the registry I can monitor the status of the GPS logger program. - Track output format ...
- GPX eXchange
- Google Earth KML
- TomTom route
- Waypoint output format ...
- GPX eXchange
- Google Earth KML
- Describe tracks automatic
If selected tracks/files are automatically named - Describe waypoints automatic
If selected waypoints/files are automatically named - About
Shows some information about the program.
- Connect/Disconnect
Connects or disconnects the GPS module - Start/End log
Begins or ends a track logfile - Waypoint
Creates a waypoint file for a single waypoint