Mine is S20+ exynos
SM-G986B? It will have the 2922x1439 @ 120hz if you will load the profile from my server - just clear the app's data and open it while connected to the internet. This resolution should show. For the adaptive, you need to activate ad-free or trial.
SM-G986B? It will have the 2922x1439 @ 120hz if you will load the profile from my server - just clear the app's data and open it while connected to the internet. This resolution should show. For the adaptive, you need to activate ad-free or trial.
Yes, just do the same mate.
Are you on v6.62.25 ?Thanks for all the replies. I am definitely buying this but there seems to be a problem after i enter the adb command. Apps keeps hanging and do not register taps. Also stuttering's and as a result i cant get the adaptive mode for the trail period to test.
Basically i can only use it without the adb command. Just install the app and refresh rate set to 96hz.
Hello. Tell me, does it make sense to use your application on s21? Is your responsive mode better than built-in mode? And what other advantages in energy consumption will there be?
The app is intended not purely for power saving purposes, depends on the users preference - some prefer pure smoothness and/or performance over battery (using High/fixed mode), while others prefer to save a bit more juice with a little sacrifice on smoothness by using lower refresh rates (I think it's an established fact that lower refresh rate consumes less battery). On either case, auto power saving mode and quicker doze mode on standby will also definitely help.Hello. Tell me, does it make sense to use your application on s21? Is your responsive mode better than built-in mode? And what other advantages in energy consumption will there be?
thanks for the answerThe app is intended not purely for power saving purposes, depends on the users preference - some prefer pure smoothness and/or performance over battery (using High/fixed mode), while others prefer to save a bit more juice with a little sacrifice on smoothness by using lower refresh rates (I think it's an established fact that lower refresh rate consumes less battery). On either case, auto power saving mode and quicker doze mode on standby will also definitely help.
"Is your responsive mode better than built-in mode?" - if you are referring to the adaptive mod, NO - the native one is definitely better. The app's adaptive mod is experimental. Further, it's primarily intended for devices that don't have the native adaptive refresh rate mode. For devices having native adaptive (like S21), native adaptive is "as is" except if you force the lower refresh rate to 48hz.
Hi. Thank you for your feedback.Working really good on N20U OneUI 3.1, except for these little two things. I've set Adaptive min to 48hz (and maximum is still 120hz). It is very fast when switching refresh rates but sometimes it doesn't do that, even if I'm moving my finger or something on the screen. For example in these two cases in the videos attached you can notice (it never says 120 because screen recording is capped to 60) that the screen remains in 48hz even if I'm moving something, while with the "default adaptive" (without this app) it goes up to 120hz as soon as I started moving things/my finger again. NB: Thank you for this very useful app!
I uploaded v6.62.27 earlier to address this issue. Kindly check update in the app.Latest version app is so aggressive in doze mode. It is literally putting every app and process to sleep. No messages or notifications are being received.
- Improvements of adaptive mod behavior on expanded notification panel - more responsive and fixed stuck min hz when media player widget is present |
- Delay for minimum Hz can now be adjusted for devices not natively supporting adaptive mode. |
6.62.27 |
-Significantly reduced aggessively delayed app notifications when applying Quick Power-Doze Mod |
(reset the toggle switch after this update) |
Min hz for adaptive setting isn't working! Nothing happens when I tap on that.v6.62.50 is now up!
- Improvements of adaptive mod behavior on expanded notification panel - more responsive and fixed stuck min hz when media player widget is present - Delay for minimum Hz can now be adjusted for devices not natively supporting adaptive mode.
6.62.27 -Significantly reduced aggessively delayed app notifications when applying Quick Power-Doze Mod (reset the toggle switch after this update)
If your device only has 60hz as lowest, you can't use that. Will work if your device has lower than 60hzMin hz for adaptive setting isn't working! Nothing happens when I tap on that.
Please send me your google play order number. I'll refund you if it's the same device. Thank you.Hi I get invalid action code after I did rom update from decrypted to encrypted.
I tried my google transaction ID
Still not working
Thanks guys love the app
All good mate donation.Please send me your google play order number. I'll refund you if it's the same device. Thank you.
Thanks.Hey man I really appreciate your work, I actually have the donation version.
Is there any way you can implement percentages lower than 80% for battery protection charge limit?
Italian: @Orlaf German:devj3ns, drbeat Russian: @a43 Swedish:Steffe2 Turkish: osmanakar312 Greek: Nick Spanish: @Sebastiansm Czech: Chrono Leggionaire Simplified Chinese: xiaolu7233123 French: Jaxom84 Polish: Pichulec Korean: chicking86, 최운택 Lithuanian: @Klaudas |
-fixed bug: unable to turn off accessibility when no feature requiring such is enabled |
-experimental workaround for enabling Adaptive/High refresh rate on PSM on OneUi4.0 |
-other bug fixes |