will not affect warranty and Knox.Activating ADB is safe to my phone or making problems with warranty or Knox??
No need to redo ADB setup. Try to clear app data again.Because after this update S20+ adaptive stopped work and is available 48 hz option which doesn't work too
Doesn't help tried many times.
Please share screenshots. Thank you.Using paid version on my S20+, with max refresh rate toggle set to 96, under Force Lowest HZ (on) there is the note 'Screen-off refresh rate 120.00001hz'
How do I get that screen-off rate to 48 or 60 htz? I understand that with UI 3.1 48 may be off the table...
Yes still doesn't work. Tried reset app data many times.
Let me investigate. For the meantime , please revert to previous version v6.64.20 if the you're still having issues on v7. Thank you.OK, my current issues with paid version on my S20+ include:
1. I've tried to limit refresh rate to 96htz, and to the lowest possible (60 htz?) with screen off. The system keeps bouncing between 96 and 120 with screen on, and stays on 120 with screen off.
2. 'Always on' screen off display, which I use as a clock, is now completely black, nothing showing.
3. I no longer get the number pad to enter 4 digits to unlock, although both face and fingerprint recognition are noticeably faster than stock.
4. Sometimes, phone is unresponsive or slow to respond when opening programs.
View attachment 5265601View attachment 5265605
View attachment 5265609
With 6.64.20 getting 'you can't install app on your device.' It's OK, I'll use as is until next version.
I don't have that adaptive delay option. Is that normal?
Using currently v7 but I didn't have it before either.
SM-N986B and android 11
Normal. This is only available for devices not natively supporting adaptive refresh rate.The same problem, G9980 and UC9 version firmware
Thank you. Please check FAQ below:just paid for this app, but I found that unlike other refresh rate app,it can't make my S20+ keep 120HZ when using camera and other map app. So why they can do so?
I am on adaptive or high refresh rate mode, but why my refresh rate stays at 60hz on google maps, waze and some other apps and games even if I set a higher max refresh rate?
These apps are either (1) blacklisted by the android system to not use the high refresh rates due to compatibility reasons, (2) sets its own preferred refresh rate or (2) controlled by Samsung's game optimizing service (game launcher). GMH app can't force these apps to use high refresh rates.
Great App! However found following weird issue. If this app is ON in installed services, then the xbox wireless controller will not work with Mantis Gamepad Pro app (it stops recognizing buttons, etc). Just sharing in case it happens to someone else
I have a problem with my Xbox wireless Controller in games when Galaxy Max Hz service is enabled - for example sticks are not working. When I turn it off in Settings->Accessibility->Installed services->Galaxy Max Hz everything works perfectly fine. Is there any way to fix that?
Edit: I have also tried with PS4 controller and it behaves exactly the same.
I have s20 fe 5g.
Sounds like a similar issue I was having with Nvidia Games not recognizing gamepad inputs when galaxy mhz accessibility option is enabled
I am thinking of implementing it after noticing some inconsistencies of tasker in detecting open/foreground app specially when resuming from recent menu. But I understand this is almost impossible to perfect by a developer and android doesn't provide an api for this.Would it be possible to have the option to set different apps refresh rate and to set them to adaptive or high within the GMH app too without using tasker?
This already exists in GMH since earlier versions.
|About this app:|
|- More customizable maintenance window interval for Quick-Doze Mode|
|- Added turn-off autosync option under screen-off mods|
|- Separate max hz settings for power saving mode|
|- Automate GMH settings using Tasker plugin support. Supported actions/variables: Max Refresh Rate, Keep Motion Smoothness on PSM, Motion Smoothness Mode, Quick-doze Mod, Change Screen Resolution.|
|- Some code refactoring and optimizations|
|- `Keep motion smoothness on power saving mode` will now take effect immediately after toggle|
|- Filter what resolutions to include in the screen resolution switcher|
|- Power saving mode and deep-doze are now separate options under screen-off mods|
|- Adaptive or high motion smoothness on CQHD+ resolution now sticks after reboot.|
|'-Adjustments on doze mode to prevent it from being interrupted by significant motion. This should improve doze performance when the device is constantly in pocket or in motion.|
|- Additional doze option with no maintenance window added|
|- Added option to keep motion smoothness on power saving mode - either enabled manually or by the system/adaptive power saving|
|- Trial workaround to prevent Samsung Pay crash (v6.63.50)|
|- Other minor bug fixes|
|- Quick power-doze mod adjustments for more power saving on idle. There are now two options available: Moderate and Aggressive|
|- Adaptive mod improvements - fixed behavior in Samsung notes and when using instagram voice note|
|- Added option to hide Net Speed in the app's main screen to those who don't need it.|
|- Fixed crash when opening some apps in Secured Folder|
|- Minor improvements on adaptive mod|
|- Fixed intermittent bug on restoring power mode settings on screen-on when using quick power-doze mod|
|- Fixed bug on refresh rate profiles not properly loading on some devices. Known profiles are now being loaded from the server if connected to internet or locally from profiles included in the apk - upon first opening the app or after clear data.|
|- Adaptive mod improvements for games and video payback|
|- Other bug fixes|
|- Improvements on Italian translations|
|- Please advise if not all refresh rates are working on your device so I can modify the profile in my server|
|Clearing app data is recommended if your device has issue on loading refresh rate profiles|
|- Improvements on adaptive mod behavior for multi-refresh rates devices not natively supporting adaptive refresh rates (fixed issues on prolonged scroll, mouse scroll, not working on settings, etc.)|
|- Set minimum refresh rate for adaptive mode to 60hz or lower (if available)|
|- Net speed indicator now autohides when not connected to internet|
|- More optimizations|
|- Other improvements and bug fixes|
|- Experimental Adaptive refresh rate mod working for Samsung devices supporting multiple refresh rates (e.g. S20/S20+/S20Ultra,S20FE) (only available for Ad-free)|
|- Quick power-doze mod: Automatic power saving mode and quick doze mode on screen-off (only available for Ad-free)|
|- Fixed high mode not working on some S21/N20U devices|
|- Show real-time refresh rate in notification and/or overlay|
|- Added some language support|
|- Improve notifications|
|- App power consumption improvement|
|- 7-day ad-free trial is available for you to test. Just click "Activate Ad-free" button and click "More info" on the snackbar prompt that will appear Ad-free trial added|
|- Stability and other improvements|
The program is very much in conflict with bank programs where the entrance is through a fingerprint. The phone starts to hang very much. Latest version of the program
The link to the latest version isn't working.
@tribalfs Thanks for all your work, amazing app!
I'm having some issue with S21 ultra v6.61 the app is detecting my lowest hz differently each time sometime it detects 60 sometimes 120 (although the actual should be 10).
Also is there an option to set a specific hz for certain app?
Could you post the link for 6.61.02! Updating through your app gives the error "there was a problem parsing the package".
Since last Android Update unuseable.
Can't switch to ,,Adaptive". Can't even set it to 96hz. I will revert back to 5.30.... That works... but 48hz will be out 4ever i think
Does this version fix the issues ? Safe to install? And thank you
No more adaptive refresh rate..allready do the ADB commands and "trial" it was once then gone forever tried to force stop and clear app data..please help
Same here, I think the dev mentioned that screen profiles aren't being loaded properly but the link seems to be broken to the update that fixes the issue. All we can do is be patient for now. I tried to get back 48hz by wiping and uninstalling but that broke adaptive for me as well
|- Fixed bug on refresh rate profiles not properly loading(bug inroduced in v6.61)|
|Clearing app data is highly recommended after this update|